{
"Missing recovery key password" : "Mankas pasvorto de la restaŭroŝlosilo",
"Please repeat the recovery key password" : "Bv. ripeti la pasvorton de restaŭroŝlosilo",
- "Repeated recovery key password does not match the provided recovery key password" : "La ripetita pasvorto de restaŭroŝlosilo ne kongruas kun la donita pasvorto de restaŭroŝlosilo",
+ "Repeated recovery key password does not match the provided recovery key password" : "La du pasvortoj pri la restaŭroŝlosilo ne kongruas",
"Recovery key successfully enabled" : "Restaŭroŝlosilo sukcese ebligita",
"Could not enable recovery key. Please check your recovery key password!" : "Restaŭroŝlosilo ne povis esti ŝaltita. Bv. kontroli vian pasvorton de restaŭroŝlosilo!",
"Recovery key successfully disabled" : "Restaŭroŝlosilo sukcese malŝaltita",
"New recovery key password" : "Nova pasvorto de restaŭroŝlosilo",
"Repeat new recovery key password" : "Ripetu la novan pasvorton de restaŭroŝlosilo",
"Change Password" : "Ŝanĝi pasvorton",
+ "Basic encryption module" : "Bazĉifrada modulo",
+ "Your private key password no longer matches your log-in password." : "La pasvorto de via privata ŝlosilo ne plu kongruas kun via ensaluta pasvorto.",
+ "Set your old private key password to your current log-in password:" : "Agordi la pasvorton de via antaŭa privata ŝlosilo al via nuna ensaluta pasvorto:",
+ " If you don't remember your old password you can ask your administrator to recover your files." : "Se vi ne memoras vian antaŭan pasvorton, vi povas peti al via administranto restaŭri viajn dosierojn.",
"Old log-in password" : "Malnova ensaluta pasvorto",
"Current log-in password" : "Nuna ensaluta pasvorto",
"Update Private Key Password" : "Ĝisdatigi la pasvorton de la malpublika ŝlosilo",
- "Enable password recovery:" : "Kapabligi restaŭron de pasvorto:",
- "Enabled" : "Kapabligita",
- "Disabled" : "Malkapabligita"
+ "Enable password recovery:" : "Ŝalti restaŭron de pasvorto:",
+ "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ŝalti tiun opcion ebligas al vi rehavi aliron al viaj ĉifritaj dosierojn okaze de pasvorta perdo.",
+ "Enabled" : "Ŝaltita",
+ "Disabled" : "Malŝaltita",
+ "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please run 'occ encryption:migrate' or contact your administrator" : "Vi devas transigi viajn ĉifroŝlosilojn el antaŭa versio (ownCloud ⩽ 8.0) al nova. Bv. ruli komandlinie „occ encryption:migrate“ aŭ kontakti vian administranton."
},
"nplurals=2; plural=(n != 1);");
{ "translations": {
"Missing recovery key password" : "Mankas pasvorto de la restaŭroŝlosilo",
"Please repeat the recovery key password" : "Bv. ripeti la pasvorton de restaŭroŝlosilo",
- "Repeated recovery key password does not match the provided recovery key password" : "La ripetita pasvorto de restaŭroŝlosilo ne kongruas kun la donita pasvorto de restaŭroŝlosilo",
+ "Repeated recovery key password does not match the provided recovery key password" : "La du pasvortoj pri la restaŭroŝlosilo ne kongruas",
"Recovery key successfully enabled" : "Restaŭroŝlosilo sukcese ebligita",
"Could not enable recovery key. Please check your recovery key password!" : "Restaŭroŝlosilo ne povis esti ŝaltita. Bv. kontroli vian pasvorton de restaŭroŝlosilo!",
"Recovery key successfully disabled" : "Restaŭroŝlosilo sukcese malŝaltita",
"New recovery key password" : "Nova pasvorto de restaŭroŝlosilo",
"Repeat new recovery key password" : "Ripetu la novan pasvorton de restaŭroŝlosilo",
"Change Password" : "Ŝanĝi pasvorton",
+ "Basic encryption module" : "Bazĉifrada modulo",
+ "Your private key password no longer matches your log-in password." : "La pasvorto de via privata ŝlosilo ne plu kongruas kun via ensaluta pasvorto.",
+ "Set your old private key password to your current log-in password:" : "Agordi la pasvorton de via antaŭa privata ŝlosilo al via nuna ensaluta pasvorto:",
+ " If you don't remember your old password you can ask your administrator to recover your files." : "Se vi ne memoras vian antaŭan pasvorton, vi povas peti al via administranto restaŭri viajn dosierojn.",
"Old log-in password" : "Malnova ensaluta pasvorto",
"Current log-in password" : "Nuna ensaluta pasvorto",
"Update Private Key Password" : "Ĝisdatigi la pasvorton de la malpublika ŝlosilo",
- "Enable password recovery:" : "Kapabligi restaŭron de pasvorto:",
- "Enabled" : "Kapabligita",
- "Disabled" : "Malkapabligita"
+ "Enable password recovery:" : "Ŝalti restaŭron de pasvorto:",
+ "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ŝalti tiun opcion ebligas al vi rehavi aliron al viaj ĉifritaj dosierojn okaze de pasvorta perdo.",
+ "Enabled" : "Ŝaltita",
+ "Disabled" : "Malŝaltita",
+ "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please run 'occ encryption:migrate' or contact your administrator" : "Vi devas transigi viajn ĉifroŝlosilojn el antaŭa versio (ownCloud ⩽ 8.0) al nova. Bv. ruli komandlinie „occ encryption:migrate“ aŭ kontakti vian administranton."
},"pluralForm" :"nplurals=2; plural=(n != 1);"
}
\ No newline at end of file
"Download" : "下载",
"Delete" : "删除",
"You can upload into this folder" : "您可以上传文件至此文件夹",
+ "Terms of service" : "服务条款",
"No compatible server found at {remote}" : " {remote} 未发现匹配的服务器",
"Invalid server URL" : "无效的服务器地址",
"Failed to add the public link to your Nextcloud" : "添加公开链接到您的 Nextcloud 失败",
"Download" : "下载",
"Delete" : "删除",
"You can upload into this folder" : "您可以上传文件至此文件夹",
+ "Terms of service" : "服务条款",
"No compatible server found at {remote}" : " {remote} 未发现匹配的服务器",
"Invalid server URL" : "无效的服务器地址",
"Failed to add the public link to your Nextcloud" : "添加公开链接到您的 Nextcloud 失败",
"Checking apps for compatible updates" : "互換性のあるアップデートの有無を確認する",
"<strong>All</strong> apps have an update for this version available" : "<strong>すべての</strong> アプリにこのバージョンのアップデートがあります",
"View changelog" : "変更履歴を確認する",
+ "Beta" : "ベータ",
"_<strong>%n</strong> app has no update for this version available_::_<strong>%n</strong> apps have no update for this version available_" : ["<strong>%n</strong> アプリにこのバージョンのアップデートがありません"],
"Could not start updater, please try the manual update" : "アップデータを起動できませんでした。手動アップデートをお試しください",
"A new version is available: %s" : "新しいバージョンが利用可能: %s",
"Checking apps for compatible updates" : "互換性のあるアップデートの有無を確認する",
"<strong>All</strong> apps have an update for this version available" : "<strong>すべての</strong> アプリにこのバージョンのアップデートがあります",
"View changelog" : "変更履歴を確認する",
+ "Beta" : "ベータ",
"_<strong>%n</strong> app has no update for this version available_::_<strong>%n</strong> apps have no update for this version available_" : ["<strong>%n</strong> アプリにこのバージョンのアップデートがありません"],
"Could not start updater, please try the manual update" : "アップデータを起動できませんでした。手動アップデートをお試しください",
"A new version is available: %s" : "新しいバージョンが利用可能: %s",
"User Home Folder Naming Rule" : "Pravidlo pojmenování domovské složky uživatele",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Ponechte prázdné pro uživatelské jméno (výchozí). Jinak uveďte LDAP/AD parametr.",
"\"$home\" Placeholder Field" : "Výplňová kolonka „$home“",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home bude v nastavení externího úložiště nahrazeno hodnotou zadaného atributu",
"Internal Username" : "Interní uživatelské jméno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Ve výchozím nastavení bude interní uživatelské jméno vytvořeno z atributu UUID. To zajišťuje, že je uživatelské jméno unikátní a znaky nemusí být převáděny. Interní uživatelské jméno má omezení, podle kterého jsou povoleny jen následující znaky [ a-zA-Z0-9_.@- ]. Ostatní znaky jsou nahrazeny jejich protějšky z ASCII nebo prostě vynechány. Při konfliktech bude přidáno/zvýšeno číslo. Interní uživatelské jméno slouží pro interní identifikaci uživatele. Je také výchozím názvem domovského adresáře uživatele. Je také součástí URL, např. pro služby *DAV. Tímto nastavením může být výchozí chování změněno. Ponechte jej prázdné, chcete-li zachovat výchozí nastavení. Změny se projeví pouze u nově namapovaných (přidaných) uživatelů LDAP.",
"Internal Username Attribute:" : "Atribut interního uživatelského jména:",
"User Home Folder Naming Rule" : "Pravidlo pojmenování domovské složky uživatele",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Ponechte prázdné pro uživatelské jméno (výchozí). Jinak uveďte LDAP/AD parametr.",
"\"$home\" Placeholder Field" : "Výplňová kolonka „$home“",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home bude v nastavení externího úložiště nahrazeno hodnotou zadaného atributu",
"Internal Username" : "Interní uživatelské jméno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Ve výchozím nastavení bude interní uživatelské jméno vytvořeno z atributu UUID. To zajišťuje, že je uživatelské jméno unikátní a znaky nemusí být převáděny. Interní uživatelské jméno má omezení, podle kterého jsou povoleny jen následující znaky [ a-zA-Z0-9_.@- ]. Ostatní znaky jsou nahrazeny jejich protějšky z ASCII nebo prostě vynechány. Při konfliktech bude přidáno/zvýšeno číslo. Interní uživatelské jméno slouží pro interní identifikaci uživatele. Je také výchozím názvem domovského adresáře uživatele. Je také součástí URL, např. pro služby *DAV. Tímto nastavením může být výchozí chování změněno. Ponechte jej prázdné, chcete-li zachovat výchozí nastavení. Změny se projeví pouze u nově namapovaných (přidaných) uživatelů LDAP.",
"Internal Username Attribute:" : "Atribut interního uživatelského jména:",
"User Home Folder Naming Rule" : "Benennungsregel für das Home-Verzeichnis des Benutzers",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird der Benutzername (Standard) verwendet. Anderenfall trage ein LDAP/AD-Attribut ein.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Standardmäßig wird der interne Benutzername aus dem UUID-Atribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [ a-zA-Z0-9_.@- ]. Andere Zeichen werden mit ihrer ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwandt, um den Benutzer intern zu identifizieren. Er ist ausserdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Bespiel für alle *DAV-Dienste. Mit dieser Einstellung, kann das Standardverhalten geändert werden. Für die Standardeinstellung, lasse das Eingabefeld leer. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus.",
"Internal Username Attribute:" : "Attribut für interne Benutzernamen:",
"User Home Folder Naming Rule" : "Benennungsregel für das Home-Verzeichnis des Benutzers",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird der Benutzername (Standard) verwendet. Anderenfall trage ein LDAP/AD-Attribut ein.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Standardmäßig wird der interne Benutzername aus dem UUID-Atribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [ a-zA-Z0-9_.@- ]. Andere Zeichen werden mit ihrer ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwandt, um den Benutzer intern zu identifizieren. Er ist ausserdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Bespiel für alle *DAV-Dienste. Mit dieser Einstellung, kann das Standardverhalten geändert werden. Für die Standardeinstellung, lasse das Eingabefeld leer. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus.",
"Internal Username Attribute:" : "Attribut für interne Benutzernamen:",
"User Home Folder Naming Rule" : "Benennungsregel für das Home-Verzeichnis des Benutzers",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird der Benutzername (Standard) verwendet. Anderenfalls tragen Sie bitte ein LDAP/AD-Attribut ein.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Standardmäßig wird der interne Benutzername aus dem UUID-Atribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [ a-zA-Z0-9_.@- ]. Andere Zeichen werden mit ihrer ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwandt, um den Benutzer intern zu identifizieren. Er ist ausserdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Bespiel für alle *DAV-Dienste. Mit dieser Einstellung, kann das Standardverhalten geändert werden. Für die Standardeinstellung, lassen Sie das Eingabefeld leer. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus.",
"Internal Username Attribute:" : "Interne Eigenschaften des Benutzers:",
"User Home Folder Naming Rule" : "Benennungsregel für das Home-Verzeichnis des Benutzers",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Ohne Eingabe wird der Benutzername (Standard) verwendet. Anderenfalls tragen Sie bitte ein LDAP/AD-Attribut ein.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Standardmäßig wird der interne Benutzername aus dem UUID-Atribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [ a-zA-Z0-9_.@- ]. Andere Zeichen werden mit ihrer ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwandt, um den Benutzer intern zu identifizieren. Er ist ausserdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Bespiel für alle *DAV-Dienste. Mit dieser Einstellung, kann das Standardverhalten geändert werden. Für die Standardeinstellung, lassen Sie das Eingabefeld leer. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus.",
"Internal Username Attribute:" : "Interne Eigenschaften des Benutzers:",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "Establecer el correo electrónico del usuario con base en el atributo LDAP. Dejelo vacío para el comportamiento predeterminado. ",
"User Home Folder Naming Rule" : "Regla de Nomenclatura para la Carpeta Inicio del Usuario",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Dejar vacío para el nombre de usuario (predeterminado). En otro caso, especifique un atributo LDAP/AD.",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home en una configuración de almacenamiento externo será reemplazado por el valor del atributo especificado",
"Internal Username" : "Nombre de usuario interno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Por defecto, el nombre de usuario interno se creará con base en el atributo UUID. Esto asegura que el nombre de usuario sea único y que los caracteres no tengan que ser convertidos. El nombre de usuario intenro tiene la restricción de que sólo los siguienes caracteres están permitidos: [ a-zA-Z0-9_.@- ]. El resto de los caracteres son reemplazados con su correspondencia ASCII o simplemente se omiten. En caso de colisiones, se agregará/ incrementará un numero. El nombre de usuario interno se usa para identificar a un usuario internamente. Adicionalmente es el nombre predeterminado para la carpeta de inicio. También es parte de las URLs remotas, por ejemplo, para todos los servicios *DAV. Con este ajuste se puede anular el comportamiento predeterminado. Mantengalo vacío para mantener el comportamiento predeterminado. Los cambios surtiran efecto sólo en los usuarios mapeados (agregados) nuevos a LDAP. ",
"Internal Username Attribute:" : "Atributo de nombre de usuario Interno:",
"Set the user's email from their LDAP attribute. Leave it empty for default behaviour." : "Establecer el correo electrónico del usuario con base en el atributo LDAP. Dejelo vacío para el comportamiento predeterminado. ",
"User Home Folder Naming Rule" : "Regla de Nomenclatura para la Carpeta Inicio del Usuario",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Dejar vacío para el nombre de usuario (predeterminado). En otro caso, especifique un atributo LDAP/AD.",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home en una configuración de almacenamiento externo será reemplazado por el valor del atributo especificado",
"Internal Username" : "Nombre de usuario interno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Por defecto, el nombre de usuario interno se creará con base en el atributo UUID. Esto asegura que el nombre de usuario sea único y que los caracteres no tengan que ser convertidos. El nombre de usuario intenro tiene la restricción de que sólo los siguienes caracteres están permitidos: [ a-zA-Z0-9_.@- ]. El resto de los caracteres son reemplazados con su correspondencia ASCII o simplemente se omiten. En caso de colisiones, se agregará/ incrementará un numero. El nombre de usuario interno se usa para identificar a un usuario internamente. Adicionalmente es el nombre predeterminado para la carpeta de inicio. También es parte de las URLs remotas, por ejemplo, para todos los servicios *DAV. Con este ajuste se puede anular el comportamiento predeterminado. Mantengalo vacío para mantener el comportamiento predeterminado. Los cambios surtiran efecto sólo en los usuarios mapeados (agregados) nuevos a LDAP. ",
"Internal Username Attribute:" : "Atributo de nombre de usuario Interno:",
"User Home Folder Naming Rule" : "Regra de nomeado do cartafol do usuario",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Deixar baleiro para o nome de usuario (predeterminado). Noutro caso, especifique un atributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Campo de marcador de posición «$home»",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "Nunha configuración de almacenamento externo substituirase $home polo valor do atributo especificado",
"Internal Username" : "Nome interno de usuario",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "De xeito predeterminado, o nome interno de usuario crearase a partires do atributo UUID. Isto asegura que o nome de usuario é único e non é necesario converter os caracteres. O nome interno de usuario ten a restrición de que só se admiten estes caracteres: [ a-zA-Z0-9_.@- ]. Outros caracteres son substituídos pola súa correspondencia ASCII ou simplemente omitidos. En caso de colisións engadirase/incrementarase un número. O nome interno de usuario usase para identificar internamente a un usuario. É tamén o nome predeterminado do cartafol de inicio do usuario. Tamén é parte dos URL remotos, por exemplo para todos os servizos *DAV. Con esta configuración, pódese anular o comportamento predeterminado. Déixeo baleiro para usar o comportamento predeterminado. Os cambios terán efecto só nos usuarios LDAP signados (engadidos) após os cambios.",
"Internal Username Attribute:" : "Atributo do nome interno de usuario:",
"User Home Folder Naming Rule" : "Regra de nomeado do cartafol do usuario",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Deixar baleiro para o nome de usuario (predeterminado). Noutro caso, especifique un atributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Campo de marcador de posición «$home»",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "Nunha configuración de almacenamento externo substituirase $home polo valor do atributo especificado",
"Internal Username" : "Nome interno de usuario",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "De xeito predeterminado, o nome interno de usuario crearase a partires do atributo UUID. Isto asegura que o nome de usuario é único e non é necesario converter os caracteres. O nome interno de usuario ten a restrición de que só se admiten estes caracteres: [ a-zA-Z0-9_.@- ]. Outros caracteres son substituídos pola súa correspondencia ASCII ou simplemente omitidos. En caso de colisións engadirase/incrementarase un número. O nome interno de usuario usase para identificar internamente a un usuario. É tamén o nome predeterminado do cartafol de inicio do usuario. Tamén é parte dos URL remotos, por exemplo para todos os servizos *DAV. Con esta configuración, pódese anular o comportamento predeterminado. Déixeo baleiro para usar o comportamento predeterminado. Os cambios terán efecto só nos usuarios LDAP signados (engadidos) após os cambios.",
"Internal Username Attribute:" : "Atributo do nome interno de usuario:",
"User Home Folder Naming Rule" : "Regola di assegnazione del nome della cartella utente",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Lascia vuoto per il nome utente (predefinito). Altrimenti, specifica un attributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Segnaposto \"$home\"",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home nella configurazione di un'archiviazione esterna sarà sostituita con il valore dell'attributo specificato",
"Internal Username" : "Nome utente interno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "In modo predefinito, il nome utente interno sarà creato dall'attributo UUID. Ciò assicura che il nome utente sia univoco e che non sia necessario convertire i caratteri. Il nome utente interno consente l'uso di determinati caratteri: [ a-zA-Z0-9_.@- ]. Altri caratteri sono sostituiti con il corrispondente ASCII o sono semplicemente omessi. In caso di conflitto, sarà aggiunto/incrementato un numero. Il nome utente interno è utilizzato per identificare un utente internamente. Rappresenta, inoltre, il nome predefinito per la cartella home dell'utente in ownCloud. Costituisce anche una parte di URL remoti, ad esempio per tutti i servizi *DAV. Con questa impostazione, il comportamento predefinito può essere scavalcato. Lascialo vuoto per ottenere il comportamento predefinito. Le modifiche avranno effetto solo sui nuovo utenti LDAP associati (aggiunti).",
"Internal Username Attribute:" : "Attributo nome utente interno:",
"User Home Folder Naming Rule" : "Regola di assegnazione del nome della cartella utente",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Lascia vuoto per il nome utente (predefinito). Altrimenti, specifica un attributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Segnaposto \"$home\"",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home nella configurazione di un'archiviazione esterna sarà sostituita con il valore dell'attributo specificato",
"Internal Username" : "Nome utente interno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "In modo predefinito, il nome utente interno sarà creato dall'attributo UUID. Ciò assicura che il nome utente sia univoco e che non sia necessario convertire i caratteri. Il nome utente interno consente l'uso di determinati caratteri: [ a-zA-Z0-9_.@- ]. Altri caratteri sono sostituiti con il corrispondente ASCII o sono semplicemente omessi. In caso di conflitto, sarà aggiunto/incrementato un numero. Il nome utente interno è utilizzato per identificare un utente internamente. Rappresenta, inoltre, il nome predefinito per la cartella home dell'utente in ownCloud. Costituisce anche una parte di URL remoti, ad esempio per tutti i servizi *DAV. Con questa impostazione, il comportamento predefinito può essere scavalcato. Lascialo vuoto per ottenere il comportamento predefinito. Le modifiche avranno effetto solo sui nuovo utenti LDAP associati (aggiunti).",
"Internal Username Attribute:" : "Attributo nome utente interno:",
"User Home Folder Naming Rule" : "Gebruikers Home map naamgevingsregel",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Laat leeg voor de gebruikersnaam (standaard). Of specificeer een LDAP/AD attribuut.",
"\"$home\" Placeholder Field" : "\"$home\" Plaatshouder veld",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home in een externe opslag configuratie wordt vervangen door de waarde van het gespecificeerde attribuut",
"Internal Username" : "Interne gebruikersnaam",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Standaard wordt de interne gebruikersnaam afgeleid van het UUID attribuut. dat zorgt ervoor dat de gebruikersnaam uniek is en dat tekens niet hoeven te worden geconverteerd. De interne gebruikersnaam heeft de beperking dat alleen deze tekens zijn toegestaan: [ a-zA-Z0-9_.@- ]. Andere tekens worden vervangen door hun overeenkomstige ASCII-waarde of simpelweg weggelaten. Bij conflicten wordt een nummer toegevoegd/verhoogd. De interne gebruikersnaam wordt gebruikt om een gebruiker intern te identificeren. Het is ook de standaardnaam voor de thuis-map van de gebruiker. Het is ook onderdeel van de externe URLs, bijvoorbeeld voor alle *DAV services. Met deze instelling kan het standaardgedrag worden overschreven. Laat het leeg voor de standaardwerkwijze. Wijzigingen hebben alleen effect voor nieuw gekoppelde (toegevoegde) LDAP gebruikers.",
"Internal Username Attribute:" : "Interne gebruikersnaam attribuut:",
"User Home Folder Naming Rule" : "Gebruikers Home map naamgevingsregel",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Laat leeg voor de gebruikersnaam (standaard). Of specificeer een LDAP/AD attribuut.",
"\"$home\" Placeholder Field" : "\"$home\" Plaatshouder veld",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home in een externe opslag configuratie wordt vervangen door de waarde van het gespecificeerde attribuut",
"Internal Username" : "Interne gebruikersnaam",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Standaard wordt de interne gebruikersnaam afgeleid van het UUID attribuut. dat zorgt ervoor dat de gebruikersnaam uniek is en dat tekens niet hoeven te worden geconverteerd. De interne gebruikersnaam heeft de beperking dat alleen deze tekens zijn toegestaan: [ a-zA-Z0-9_.@- ]. Andere tekens worden vervangen door hun overeenkomstige ASCII-waarde of simpelweg weggelaten. Bij conflicten wordt een nummer toegevoegd/verhoogd. De interne gebruikersnaam wordt gebruikt om een gebruiker intern te identificeren. Het is ook de standaardnaam voor de thuis-map van de gebruiker. Het is ook onderdeel van de externe URLs, bijvoorbeeld voor alle *DAV services. Met deze instelling kan het standaardgedrag worden overschreven. Laat het leeg voor de standaardwerkwijze. Wijzigingen hebben alleen effect voor nieuw gekoppelde (toegevoegde) LDAP gebruikers.",
"Internal Username Attribute:" : "Interne gebruikersnaam attribuut:",
"User Home Folder Naming Rule" : "Regra de nomeação de pasta de usuário Home",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Deixe vazio para nome de usuário (padrão). Caso contrário, especifique um atributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Campo Reservado \"$home\"",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home em uma configuração de armazenamento externo será substituído pelo valor do atributo especificado",
"Internal Username" : "Nome de usuário interno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Por padrão, um nome de usuário interno será criado a partir de um atributo UUID. Isso garante que o nome de usuário seja único e estes caracteres não precisam ser convertidos. um nome de usuário interno possui a restrição que somente estes caracteres são permitdos: [ a-zA-Z0-9_.@- ]. Outros caracteres serão substituidos por seus correspondentes ASCII ou simplesmente omitidos. Em caso de coincidências, um número será adicionado/incrementado. O nome de usuário interno é utilizado para identificar o usuário internamente. Também é o nome padrão da pasta principal do usuário. Também é uma parte das URL's remotas, por exemplo, para todos os serviços *DAV. Com esta configuração, o comportamento padrão pode ser alterado. Deixe em branco para que assuma o comportamento padrão. Alterações terão efeito apenas em novos usuários LDAP mapeados (adicionados).",
"Internal Username Attribute:" : "Atributo Interno de Nome de Usuário:",
"User Home Folder Naming Rule" : "Regra de nomeação de pasta de usuário Home",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Deixe vazio para nome de usuário (padrão). Caso contrário, especifique um atributo LDAP/AD.",
"\"$home\" Placeholder Field" : "Campo Reservado \"$home\"",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home em uma configuração de armazenamento externo será substituído pelo valor do atributo especificado",
"Internal Username" : "Nome de usuário interno",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Por padrão, um nome de usuário interno será criado a partir de um atributo UUID. Isso garante que o nome de usuário seja único e estes caracteres não precisam ser convertidos. um nome de usuário interno possui a restrição que somente estes caracteres são permitdos: [ a-zA-Z0-9_.@- ]. Outros caracteres serão substituidos por seus correspondentes ASCII ou simplesmente omitidos. Em caso de coincidências, um número será adicionado/incrementado. O nome de usuário interno é utilizado para identificar o usuário internamente. Também é o nome padrão da pasta principal do usuário. Também é uma parte das URL's remotas, por exemplo, para todos os serviços *DAV. Com esta configuração, o comportamento padrão pode ser alterado. Deixe em branco para que assuma o comportamento padrão. Alterações terão efeito apenas em novos usuários LDAP mapeados (adicionados).",
"Internal Username Attribute:" : "Atributo Interno de Nome de Usuário:",
"User Home Folder Naming Rule" : "Правило именовања корисничке фасцикле",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Оставите празно за корисничко име (подразумевано). У супротном, наведите особину LDAP/AD.",
"\"$home\" Placeholder Field" : "Резервисано место за поље „$home“",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home ће се у подешавању спољног складишта заменити са вредношћу задатог атрибута",
"Internal Username" : "Интерно корисничко име:",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Подразумевано се интерно корисничко име креира од UUID атрибута. Тиме се гарантује да се корисничко име јединствено и да карактери не морају да се конвертују. Интерно корисничко име има ограничења да су дозвољени само следећи карактери: [ a-zA-Z0-9_.@- ]. Остали карактери ће или бити замењени ASCII еквивалентима или ће бити прескочени. Ако се деси поклапање са постојећим корисничким именом, додаће се број на крај имена. Интерно корисничко име се користи да идентификује корисника интерно. Такође се користи и као подразумевано име за име корисничку фасцикле, а и део је удаљених адреса, нпр. свих *DAV сервиса. Уз помоћ овог подешавања, може да се промени подразумевано понашање. Оставите га празним за подразумевано понашање. Промене ће се тицати само новомапираних (додатих) LDAP корисника.",
"Internal Username Attribute:" : "Интерни параметри корисничког имена:",
"User Home Folder Naming Rule" : "Правило именовања корисничке фасцикле",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Оставите празно за корисничко име (подразумевано). У супротном, наведите особину LDAP/AD.",
"\"$home\" Placeholder Field" : "Резервисано место за поље „$home“",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home ће се у подешавању спољног складишта заменити са вредношћу задатог атрибута",
"Internal Username" : "Интерно корисничко име:",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Подразумевано се интерно корисничко име креира од UUID атрибута. Тиме се гарантује да се корисничко име јединствено и да карактери не морају да се конвертују. Интерно корисничко име има ограничења да су дозвољени само следећи карактери: [ a-zA-Z0-9_.@- ]. Остали карактери ће или бити замењени ASCII еквивалентима или ће бити прескочени. Ако се деси поклапање са постојећим корисничким именом, додаће се број на крај имена. Интерно корисничко име се користи да идентификује корисника интерно. Такође се користи и као подразумевано име за име корисничку фасцикле, а и део је удаљених адреса, нпр. свих *DAV сервиса. Уз помоћ овог подешавања, може да се промени подразумевано понашање. Оставите га празним за подразумевано понашање. Промене ће се тицати само новомапираних (додатих) LDAP корисника.",
"Internal Username Attribute:" : "Интерни параметри корисничког имена:",
"User Home Folder Naming Rule" : "Namnregel för hemkatalog",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Lämnas tomt för användarnamn (standard). Ange annars ett LDAP-/AD-attribut.",
"\"$home\" Placeholder Field" : "\"$home\" Platshållare-fält",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home i en extern lagringskonfiguration kommer ersättas med värdet av det angivna attributet",
"Internal Username" : "Internt användarnamn",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Som standard kommer de interna användarnamnen skapas från UUID-attributen. Det säkerställer att användarnamnet är unikt och att tecken inte behöver konverteras. Det interna användarnamnet har begränsningen att bara dessa tecken tillåts: [ a-zA-Z0-9_.@- ]. Andra tecken kommer att ersättas med deras korresponderande ASCII-kod eller utelämnas. Vid kollisioner kommer ett nummer läggas till/ökas. Det interna användarnamnet används för att identifiera en användare internt. Det är också standardnamnet för användarens hemmapp. Det är också en del av externa URL'er, till exempel för alla *DAV-tjänster. Med denna inställning, kan standardbeteendet bli överskrivet. Lämna det tomt för standardbeteende. Ändringar kommer att bara gälla för nya mappningar (tillagda) LDAP-användare.",
"Internal Username Attribute:" : "Internt användarnamnsattribut:",
"User Home Folder Naming Rule" : "Namnregel för hemkatalog",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Lämnas tomt för användarnamn (standard). Ange annars ett LDAP-/AD-attribut.",
"\"$home\" Placeholder Field" : "\"$home\" Platshållare-fält",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "$home i en extern lagringskonfiguration kommer ersättas med värdet av det angivna attributet",
"Internal Username" : "Internt användarnamn",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Som standard kommer de interna användarnamnen skapas från UUID-attributen. Det säkerställer att användarnamnet är unikt och att tecken inte behöver konverteras. Det interna användarnamnet har begränsningen att bara dessa tecken tillåts: [ a-zA-Z0-9_.@- ]. Andra tecken kommer att ersättas med deras korresponderande ASCII-kod eller utelämnas. Vid kollisioner kommer ett nummer läggas till/ökas. Det interna användarnamnet används för att identifiera en användare internt. Det är också standardnamnet för användarens hemmapp. Det är också en del av externa URL'er, till exempel för alla *DAV-tjänster. Med denna inställning, kan standardbeteendet bli överskrivet. Lämna det tomt för standardbeteende. Ändringar kommer att bara gälla för nya mappningar (tillagda) LDAP-användare.",
"Internal Username Attribute:" : "Internt användarnamnsattribut:",
"User Home Folder Naming Rule" : "Kullanıcı Ana Klasörünü Adlandırma Kuralı",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Kullanıcı adının kullanılması için boş bırakın (varsayılan) ya da bir LDAP/AD özniteliği belirtin.",
"\"$home\" Placeholder Field" : "\"$home\" Yer Belirleyici Alanı",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "Bir dış depolama yapılandırmasında $home yerine belirtilen öznitelik kullanılır",
"Internal Username" : "İç Kullanıcı Adı",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Varsayılan olarak, iç kullanıcı adı UUID özniteliğinden oluşturulur. Böylece kullanıcı adının eşsiz olması ve dönüştürülmesi gereken karakterler içermediğinden emin olunur. İç kullanıcı adında kısıtlaması yalnız şu karakterleri kullanılabilir: [ a-zA-Z0-9_.@- ]. Diğer karakterler ASCII karşılıklarına dönüştürülür ya da yok sayılır. Çakışmalarda ada bir sayı eklenir. İç kullanıcı adı bir kullanıcıyı içsel olarak belirlemeye yarar. Aynı zamanda kullanıcı ana klasörünün varsayılan adı olarak da kullanılır. İnternet adreslerinin, örneğin *DAV servislerinin bir parçasıdır. Bu seçenek ile varsayılan davranış değiştirilebilir. Varsayılan davranışı kullanmak için boş bırakın. Değişiklikler yalnız yeni eşleştirilecek (eklenecek) LDAP kullanıcılarını etkiler.",
"Internal Username Attribute:" : "İç Kullanıcı Adı Özniteliği:",
"User Home Folder Naming Rule" : "Kullanıcı Ana Klasörünü Adlandırma Kuralı",
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "Kullanıcı adının kullanılması için boş bırakın (varsayılan) ya da bir LDAP/AD özniteliği belirtin.",
"\"$home\" Placeholder Field" : "\"$home\" Yer Belirleyici Alanı",
- "$home in an external storage configuration will replaced with the value of the specified attribute" : "Bir dış depolama yapılandırmasında $home yerine belirtilen öznitelik kullanılır",
"Internal Username" : "İç Kullanıcı Adı",
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Varsayılan olarak, iç kullanıcı adı UUID özniteliğinden oluşturulur. Böylece kullanıcı adının eşsiz olması ve dönüştürülmesi gereken karakterler içermediğinden emin olunur. İç kullanıcı adında kısıtlaması yalnız şu karakterleri kullanılabilir: [ a-zA-Z0-9_.@- ]. Diğer karakterler ASCII karşılıklarına dönüştürülür ya da yok sayılır. Çakışmalarda ada bir sayı eklenir. İç kullanıcı adı bir kullanıcıyı içsel olarak belirlemeye yarar. Aynı zamanda kullanıcı ana klasörünün varsayılan adı olarak da kullanılır. İnternet adreslerinin, örneğin *DAV servislerinin bir parçasıdır. Bu seçenek ile varsayılan davranış değiştirilebilir. Varsayılan davranışı kullanmak için boş bırakın. Değişiklikler yalnız yeni eşleştirilecek (eklenecek) LDAP kullanıcılarını etkiler.",
"Internal Username Attribute:" : "İç Kullanıcı Adı Özniteliği:",
"Check %s does not exist" : "Sprawdź, czy %s nie istnieje",
"Check %s is invalid" : "Sprawdź, czy %s jest nieprawidłowy",
"Check #%s does not exist" : "Sprawdź, czy #%s nie istnieje",
+ "Tag management" : "Zarządzanie tagami",
"Files workflow engine" : "Pliki silnika workflow",
"Open documentation" : "Otwórz dokumentację",
"Loading…" : "Wczytywanie…",
"Check %s does not exist" : "Sprawdź, czy %s nie istnieje",
"Check %s is invalid" : "Sprawdź, czy %s jest nieprawidłowy",
"Check #%s does not exist" : "Sprawdź, czy #%s nie istnieje",
+ "Tag management" : "Zarządzanie tagami",
"Files workflow engine" : "Pliki silnika workflow",
"Open documentation" : "Otwórz dokumentację",
"Loading…" : "Wczytywanie…",
"File is too big" : "Plik jest za duży",
"The selected file is not an image." : "Wybrany plik nie jest obrazem.",
"The selected file cannot be read." : "Wybrany plik nie może być odczytany.",
- "Invalid file provided" : "Podano błędny plik",
- "No image or file provided" : "Brak obrazu lub pliku dostarczonego",
+ "Invalid file provided" : "Wskazano niepoprawny plik",
+ "No image or file provided" : "Brak obrazu lub pliku",
"Unknown filetype" : "Nieznany typ pliku",
- "Invalid image" : "Nieprawidłowe zdjęcie",
- "An error occurred. Please contact your admin." : "Pojawił się błąd. Skontaktuj się z administratorem.",
- "No temporary profile picture available, try again" : "Brak obrazka profilu tymczasowego, spróbuj ponownie",
+ "Invalid image" : "Nieprawidłowy obraz",
+ "An error occurred. Please contact your admin." : "Wystąpił błąd. Skontaktuj się z administratorem.",
+ "No temporary profile picture available, try again" : "Brak tymczasowego zdjęcia profilowego, spróbuj ponownie",
"No crop data provided" : "Brak danych do przycięcia",
"No valid crop data provided" : "Brak danych do przycięcia",
"Crop is not square" : "Przycięcie nie jest prostokątem",
"Couldn't reset password because the token is invalid" : "Nie można zresetować hasła, ponieważ token jest niepoprawny",
"Couldn't reset password because the token is expired" : "Nie można zresetować hasła, ponieważ token wygasł",
"Could not send reset email because there is no email address for this username. Please contact your administrator." : "Nie udało się wysłać ponownego e-maila, ponieważ nie ma adresu e-mail do tego użytkownika. Proszę skontaktować się z administratorem.",
- "%s password reset" : "%s reset hasła",
- "Password reset" : "Reset hasła",
+ "%s password reset" : "%s zresetowanie hasła",
+ "Password reset" : "Zresetowanie hasła",
"Click the following button to reset your password. If you have not requested the password reset, then ignore this email." : "Kliknij następujący przycisk, żeby zresetować hasło. Jeśli nie prosiłeś o zmianę hasła możesz zignorować tego e-maila.",
"Click the following link to reset your password. If you have not requested the password reset, then ignore this email." : "Kliknij następujący przycisk, żeby zresetować hasło. Jeśli nie prosiłeś o zmianę hasła możesz zignorować tego e-maila.",
"Reset your password" : "Zresetuj hasło",
"[%d / %d]: Checking table %s" : "[%d / %d]: Sprawdzanie tabeli %s",
"Turned on maintenance mode" : "Włączony tryb konserwacji",
"Turned off maintenance mode" : "Wyłączony tryb konserwacji",
- "Maintenance mode is kept active" : "Tryb konserwacji pozostaje aktywny",
+ "Maintenance mode is kept active" : "Tryb konserwacji jest aktywny",
"Updating database schema" : "Aktualizacja struktury bazy danych",
- "Updated database" : "Zaktualizuj bazę",
+ "Updated database" : "Zaktualizowana baza danych",
"Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "Sprawdzam, czy struktura bazy danych może zostać zaktualizowana (to może zająć dużo czasu w zależności od rozmiaru bazy danych)",
"Checked database schema update" : "Sprawdzono aktualizację struktury bazy danych",
"Checking updates of apps" : "Sprawdzam aktualizacje aplikacji",
"File is too big" : "Plik jest za duży",
"The selected file is not an image." : "Wybrany plik nie jest obrazem.",
"The selected file cannot be read." : "Wybrany plik nie może być odczytany.",
- "Invalid file provided" : "Podano błędny plik",
- "No image or file provided" : "Brak obrazu lub pliku dostarczonego",
+ "Invalid file provided" : "Wskazano niepoprawny plik",
+ "No image or file provided" : "Brak obrazu lub pliku",
"Unknown filetype" : "Nieznany typ pliku",
- "Invalid image" : "Nieprawidłowe zdjęcie",
- "An error occurred. Please contact your admin." : "Pojawił się błąd. Skontaktuj się z administratorem.",
- "No temporary profile picture available, try again" : "Brak obrazka profilu tymczasowego, spróbuj ponownie",
+ "Invalid image" : "Nieprawidłowy obraz",
+ "An error occurred. Please contact your admin." : "Wystąpił błąd. Skontaktuj się z administratorem.",
+ "No temporary profile picture available, try again" : "Brak tymczasowego zdjęcia profilowego, spróbuj ponownie",
"No crop data provided" : "Brak danych do przycięcia",
"No valid crop data provided" : "Brak danych do przycięcia",
"Crop is not square" : "Przycięcie nie jest prostokątem",
"Couldn't reset password because the token is invalid" : "Nie można zresetować hasła, ponieważ token jest niepoprawny",
"Couldn't reset password because the token is expired" : "Nie można zresetować hasła, ponieważ token wygasł",
"Could not send reset email because there is no email address for this username. Please contact your administrator." : "Nie udało się wysłać ponownego e-maila, ponieważ nie ma adresu e-mail do tego użytkownika. Proszę skontaktować się z administratorem.",
- "%s password reset" : "%s reset hasła",
- "Password reset" : "Reset hasła",
+ "%s password reset" : "%s zresetowanie hasła",
+ "Password reset" : "Zresetowanie hasła",
"Click the following button to reset your password. If you have not requested the password reset, then ignore this email." : "Kliknij następujący przycisk, żeby zresetować hasło. Jeśli nie prosiłeś o zmianę hasła możesz zignorować tego e-maila.",
"Click the following link to reset your password. If you have not requested the password reset, then ignore this email." : "Kliknij następujący przycisk, żeby zresetować hasło. Jeśli nie prosiłeś o zmianę hasła możesz zignorować tego e-maila.",
"Reset your password" : "Zresetuj hasło",
"[%d / %d]: Checking table %s" : "[%d / %d]: Sprawdzanie tabeli %s",
"Turned on maintenance mode" : "Włączony tryb konserwacji",
"Turned off maintenance mode" : "Wyłączony tryb konserwacji",
- "Maintenance mode is kept active" : "Tryb konserwacji pozostaje aktywny",
+ "Maintenance mode is kept active" : "Tryb konserwacji jest aktywny",
"Updating database schema" : "Aktualizacja struktury bazy danych",
- "Updated database" : "Zaktualizuj bazę",
+ "Updated database" : "Zaktualizowana baza danych",
"Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "Sprawdzam, czy struktura bazy danych może zostać zaktualizowana (to może zająć dużo czasu w zależności od rozmiaru bazy danych)",
"Checked database schema update" : "Sprawdzono aktualizację struktury bazy danych",
"Checking updates of apps" : "Sprawdzam aktualizacje aplikacji",
"User backend" : "ユーザーバックエンド",
"Last login" : "最終ログイン",
"Default language" : "既定の言語",
+ "Add a new user" : "新しいユーザーを追加",
"Unlimited" : "無制限",
"Default quota" : "デフォルトのクォータ",
"Password change is disabled because the master key is disabled" : "マスターキーが無効になっているため、パスワードの変更は無効です",
"{license}-licensed" : "{license}-ライセンス",
"New user" : "新しいユーザー",
"Default quota:" : "デフォルトのクォータ :",
+ "Select default quota" : "デフォルトのクォーター",
"Show last login" : "最終ログインを表示",
"Show user backend" : "ユーザーバックエンドを表示",
"You are about to remove the group {group}. The users will NOT be deleted." : "{group}グループを削除しようとしています。 ユーザーは削除されません。",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'" : "古い暗号化(ownCloud <= 8.0) から新しいものに暗号化キーを移行する必要があります。\"デフォルトの暗号化モジュール\" を有効にして 'occ encryption:migrate' を実行してください。",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one." : "古い暗号化(ownCloud <= 8.0) から新しいものに暗号化キーを移行する必要があります。",
"Start migration" : "移行を開始",
+ "save" : "保存",
"Background jobs" : "バックグラウンドジョブ",
"Last job ran %s." : "最終ジョブ実行: %s",
"Last job execution ran %s. Something seems wrong." : "最終ジョブ実行は %s です。何か問題が発生しています。",
"User backend" : "ユーザーバックエンド",
"Last login" : "最終ログイン",
"Default language" : "既定の言語",
+ "Add a new user" : "新しいユーザーを追加",
"Unlimited" : "無制限",
"Default quota" : "デフォルトのクォータ",
"Password change is disabled because the master key is disabled" : "マスターキーが無効になっているため、パスワードの変更は無効です",
"{license}-licensed" : "{license}-ライセンス",
"New user" : "新しいユーザー",
"Default quota:" : "デフォルトのクォータ :",
+ "Select default quota" : "デフォルトのクォーター",
"Show last login" : "最終ログインを表示",
"Show user backend" : "ユーザーバックエンドを表示",
"You are about to remove the group {group}. The users will NOT be deleted." : "{group}グループを削除しようとしています。 ユーザーは削除されません。",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'" : "古い暗号化(ownCloud <= 8.0) から新しいものに暗号化キーを移行する必要があります。\"デフォルトの暗号化モジュール\" を有効にして 'occ encryption:migrate' を実行してください。",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one." : "古い暗号化(ownCloud <= 8.0) から新しいものに暗号化キーを移行する必要があります。",
"Start migration" : "移行を開始",
+ "save" : "保存",
"Background jobs" : "バックグラウンドジョブ",
"Last job ran %s." : "最終ジョブ実行: %s",
"Last job execution ran %s. Something seems wrong." : "最終ジョブ実行は %s です。何か問題が発生しています。",
projects / nextcloud-server.git / commitdiff