-#\r
-# Git Servlet Settings\r
-#\r
-\r
-# Base folder for repositories.\r
-# This folder may contain bare and non-bare repositories but Gitblit will only\r
-# allow you to push to bare repositories.\r
-# Use forward slashes even on Windows!!\r
-# e.g. c:/gitrepos\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-git.repositoriesFolder = git\r
-\r
-# Build the available repository list at startup and cache this list for reuse.\r
-# This reduces disk io when presenting the repositories page, responding to rpcs,\r
-# etc, but it means that Gitblit will not automatically identify repositories\r
-# added or deleted by external tools.\r
-#\r
-# For this case you can use curl, wget, etc to issue an rpc request to clear the\r
-# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)\r
-#\r
-# SINCE 1.1.0\r
-git.cacheRepositoryList = true\r
-\r
-# Search the repositories folder subfolders for other repositories.\r
-# Repositories MAY NOT be nested (i.e. one repository within another)\r
-# but they may be grouped together in subfolders.\r
-# e.g. c:/gitrepos/libraries/mylibrary.git\r
-# c:/gitrepos/libraries/myotherlibrary.git\r
-#\r
-# SINCE 0.5.0\r
-git.searchRepositoriesSubfolders = true\r
-\r
-# Maximum number of folders to recurse into when searching for repositories.\r
-# The default value, -1, disables depth limits.\r
-#\r
-# SINCE 1.1.0\r
-git.searchRecursionDepth = -1\r
-\r
-# List of regex exclusion patterns to match against folders found in\r
-# *git.repositoriesFolder*.\r
-# Use forward slashes even on Windows!!\r
-# e.g. test/jgit\.git\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.1.0\r
-git.searchExclusions =\r
-\r
-# List of regex url patterns for extracting a repository name when locating\r
-# submodules.\r
-# e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract\r
-# *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*\r
-# If no matches are found then the submodule repository name is assumed to be\r
-# whatever trails the last / character. (e.g. gitblit.git).\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.1.0\r
-git.submoduleUrlPatterns = .*?://github.com/(.*)\r
-\r
-# Allow push/pull over http/https with JGit servlet.\r
-# If you do NOT want to allow Git clients to clone/push to Gitblit set this\r
-# to false. You might want to do this if you are only using ssh:// or git://.\r
-# If you set this false, consider changing the *web.otherUrls* setting to\r
-# indicate your clone/push urls.\r
-#\r
-# SINCE 0.5.0\r
-git.enableGitServlet = true\r
-\r
-# If you want to restrict all git servlet access to those with valid X509 client\r
-# certificates then set this value to true.\r
-#\r
-# SINCE 1.2.0\r
-git.requiresClientCertificate = false\r
-\r
-# Enforce date checks on client certificates to ensure that they are not being\r
-# used prematurely and that they have not expired.\r
-#\r
-# SINCE 1.2.0\r
-git.enforceCertificateValidity = true\r
-\r
-# List of OIDs to extract from a client certificate DN to map a certificate to\r
-# an account username.\r
-#\r
-# e.g. git.certificateUsernameOIDs = CN\r
-# e.g. git.certificateUsernameOIDs = FirstName LastName\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.2.0\r
-git.certificateUsernameOIDs = CN\r
-\r
-# Only serve/display bare repositories.\r
-# If there are non-bare repositories in git.repositoriesFolder and this setting\r
-# is true, they will be excluded from the ui. \r
-#\r
-# SINCE 0.9.0\r
-git.onlyAccessBareRepositories = false\r
-\r
-# Allow an authenticated user to create a destination repository on a push if\r
-# the repository does not already exist.\r
-#\r
-# Administrator accounts can create a repository in any project.\r
-# These repositories are created with the default access restriction and authorization\r
-# control values. The pushing account is set as the owner.\r
-#\r
-# Non-administrator accounts with the CREATE role may create personal repositories.\r
-# These repositories are created as VIEW restricted for NAMED users.\r
-# The pushing account is set as the owner.\r
-#\r
-# SINCE 1.2.0\r
-git.allowCreateOnPush = true\r
-\r
-# The default access restriction for new repositories.\r
-# Valid values are NONE, PUSH, CLONE, VIEW\r
-# NONE = anonymous view, clone, & push\r
-# PUSH = anonymous view & clone and authenticated push\r
-# CLONE = anonymous view, authenticated clone & push\r
-# VIEW = authenticated view, clone, & push\r
-#\r
-# SINCE 1.0.0\r
-git.defaultAccessRestriction = NONE\r
-\r
-# The default authorization control for new repositories.\r
-# Valid values are AUTHENTICATED and NAMED\r
-# AUTHENTICATED = any authenticated user is granted restricted access\r
-# NAMED = only named users/teams are granted restricted access\r
-#\r
-# SINCE 1.1.0\r
-git.defaultAuthorizationControl = NAMED\r
-\r
-# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)\r
-#\r
-# USE AT YOUR OWN RISK!\r
-#\r
-# If enabled, the garbage collection executor scans all repositories once a day\r
-# at the hour of your choosing. The GC executor will take each repository "offline",\r
-# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.\r
-#\r
-# While the repository is offline it will be inaccessible from the web UI or from\r
-# any of the other services (git, rpc, rss, etc).\r
-#\r
-# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,\r
-# especially on Windows systems, so if you are using other tools please coordinate\r
-# their usage with your GC Executor schedule or do not use this feature.\r
-#\r
-# The GC algorithm complex and the JGit team advises caution when using their\r
-# young implementation of GC.\r
-#\r
-# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics\r
-#\r
-# EXPERIMENTAL\r
-# SINCE 1.2.0\r
-# RESTART REQUIRED\r
-git.enableGarbageCollection = false\r
-\r
-# Hour of the day for the GC Executor to scan repositories.\r
-# This value is in 24-hour time.\r
-#\r
-# SINCE 1.2.0\r
-git.garbageCollectionHour = 0\r
-\r
-# The default minimum total filesize of loose objects to trigger early garbage\r
-# collection.\r
-#\r
-# You may specify a custom threshold for a repository in the repository's settings.\r
-# Common unit suffixes of k, m, or g are supported.\r
-#\r
-# SINCE 1.2.0\r
-git.defaultGarbageCollectionThreshold = 500k\r
-\r
-# The default period, in days, between GCs for a repository. If the total filesize\r
-# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's\r
-# custom threshold, this period will be short-circuited. \r
-#\r
-# e.g. if a repository collects 100KB of loose objects every day with a 500KB\r
-# threshold and a period of 7 days, it will take 5 days for the loose objects to\r
-# be collected, packed, and pruned.\r
-#\r
-# OR\r
-#\r
-# if a repository collects 10KB of loose objects every day with a 500KB threshold\r
-# and a period of 7 days, it will take the full 7 days for the loose objects to be\r
-# collected, packed, and pruned.\r
-#\r
-# You may specify a custom period for a repository in the repository's settings.\r
-#\r
-# The minimum value is 1 day since the GC Executor only runs once a day.\r
-#\r
-# SINCE 1.2.0\r
-git.defaultGarbageCollectionPeriod = 7\r
-\r
-# Number of bytes of a pack file to load into memory in a single read operation.\r
-# This is the "page size" of the JGit buffer cache, used for all pack access\r
-# operations. All disk IO occurs as single window reads. Setting this too large\r
-# may cause the process to load more data than is required; setting this too small\r
-# may increase the frequency of read() system calls.\r
-#\r
-# Default on JGit is 8 KiB on all platforms.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitWindowSize = 8k\r
-\r
-# Maximum number of bytes to load and cache in memory from pack files. If JGit\r
-# needs to access more than this many bytes it will unload less frequently used\r
-# windows to reclaim memory space within the process. As this buffer must be shared\r
-# with the rest of the JVM heap, it should be a fraction of the total memory available.\r
-#\r
-# The JGit team recommends setting this value larger than the size of your biggest\r
-# repository. This ensures you can serve most requests from memory.\r
-#\r
-# Default on JGit is 10 MiB on all platforms.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitLimit = 10m\r
-\r
-# Maximum number of bytes to reserve for caching base objects that multiple deltafied\r
-# objects reference. By storing the entire decompressed base object in a cache Git\r
-# is able to avoid unpacking and decompressing frequently used base objects multiple times.\r
-#\r
-# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust\r
-# this value.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.deltaBaseCacheLimit = 10m\r
-\r
-# Maximum number of pack files to have open at once. A pack file must be opened\r
-# in order for any of its data to be available in a cached window.\r
-#\r
-# If you increase this to a larger setting you may need to also adjust the ulimit\r
-# on file descriptors for the host JVM, as Gitblit needs additional file descriptors\r
-# available for network sockets and other repository data manipulation.\r
-#\r
-# Default on JGit is 128 file descriptors on all platforms.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitOpenFiles = 128\r
-\r
-# Largest object size, in bytes, that JGit will allocate as a contiguous byte\r
-# array. Any file revision larger than this threshold will have to be streamed,\r
-# typically requiring the use of temporary files under $GIT_DIR/objects to implement\r
-# psuedo-random access during delta decompression.\r
-#\r
-# Servers with very high traffic should set this to be larger than the size of\r
-# their common big files. For example a server managing the Android platform\r
-# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable\r
-# setting in that environment. Setting this too high may cause the JVM to run out\r
-# of heap space when handling very big binary files, such as device firmware or\r
-# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. \r
-#\r
-# Default is 50 MiB on all platforms.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.streamFileThreshold = 50m\r
-\r
-# When true, JGit will use mmap() rather than malloc()+read() to load data from\r
-# pack files. The use of mmap can be problematic on some JVMs as the garbage\r
-# collector must deduce that a memory mapped segment is no longer in use before\r
-# a call to munmap() can be made by the JVM native code.\r
-#\r
-# In server applications (such as Gitblit) that need to access many pack files,\r
-# setting this to true risks artificially running out of virtual address space, \r
-# as the garbage collector cannot reclaim unused mapped spaces fast enough.\r
-#\r
-# Default on JGit is false. Although potentially slower, it yields much more\r
-# predictable behavior.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitMmap = false\r
-\r
-#\r
-# Groovy Integration\r
-#\r
-\r
-# Location of Groovy scripts to use for Pre and Post receive hooks.\r
-# Use forward slashes even on Windows!!\r
-# e.g. c:/groovy\r
-#\r
-# RESTART REQUIRED\r
-# SINCE 0.8.0\r
-groovy.scriptsFolder = groovy\r
-\r
-# Specify the directory Grape uses for downloading libraries.\r
-# http://groovy.codehaus.org/Grape\r
-#\r
-# RESTART REQUIRED\r
-# SINCE 1.0.0\r
-groovy.grapeFolder = groovy/grape\r
-\r
-# Scripts to execute on Pre-Receive.\r
-#\r
-# These scripts execute after an incoming push has been parsed and validated\r
-# but BEFORE the changes are applied to the repository. You might reject a\r
-# push in this script based on the repository and branch the push is attempting\r
-# to change.\r
-#\r
-# Script names are case-sensitive on case-sensitive file systems. You may omit\r
-# the traditional ".groovy" from this list if your file extension is ".groovy" \r
-#\r
-# NOTE:\r
-# These scripts are only executed when pushing to *Gitblit*, not to other Git\r
-# tooling you may be using. Also note that these scripts are shared between\r
-# repositories. These are NOT repository-specific scripts! Within the script\r
-# you may customize the control-flow for a specific repository by checking the\r
-# *repository* variable.\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.8.0\r
-groovy.preReceiveScripts =\r
-\r
-# Scripts to execute on Post-Receive.\r
-#\r
-# These scripts execute AFTER an incoming push has been applied to a repository.\r
-# You might trigger a continuous-integration build here or send a notification.\r
-#\r
-# Script names are case-sensitive on case-sensitive file systems. You may omit\r
-# the traditional ".groovy" from this list if your file extension is ".groovy" \r
-#\r
-# NOTE:\r
-# These scripts are only executed when pushing to *Gitblit*, not to other Git\r
-# tooling you may be using. Also note that these scripts are shared between\r
-# repositories. These are NOT repository-specific scripts! Within the script\r
-# you may customize the control-flow for a specific repository by checking the\r
-# *repository* variable.\r
-# \r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.8.0\r
-groovy.postReceiveScripts =\r
-\r
-# Repository custom fields for Groovy Hook mechanism\r
-#\r
-# List of key=label pairs of custom fields to prompt for in the Edit Repository\r
-# page. These keys are stored in the repository's git config file in the \r
-# section [gitblit "customFields"]. Key names are alphanumeric only. These\r
-# fields are intended to be used for the Groovy hook mechanism where a script\r
-# can adjust it's execution based on the custom fields stored in the repository\r
-# config.\r
-#\r
-# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.0.0\r
-groovy.customFields = \r
-\r
-#\r
-# Authentication Settings\r
-#\r
-\r
-# Require authentication to see everything but the admin pages\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.authenticateViewPages = false\r
-\r
-# Require admin authentication for the admin functions and pages\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.authenticateAdminPages = true\r
-\r
-# Allow Gitblit to store a cookie in the user's browser for automatic\r
-# authentication. The cookie is generated by the user service.\r
-#\r
-# SINCE 0.5.0\r
-web.allowCookieAuthentication = true\r
-\r
-# Config file for storing project metadata\r
-#\r
-# SINCE 1.2.0\r
-web.projectsFile = projects.conf\r
-\r
-# Either the full path to a user config file (users.conf)\r
-# OR the full path to a simple user properties file (users.properties)\r
-# OR a fully qualified class name that implements the IUserService interface.\r
-#\r
-# Alternative user services:\r
-# com.gitblit.LdapUserService\r
-# com.gitblit.RedmineUserService\r
-#\r
-# Any custom user service implementation must have a public default constructor.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-realm.userService = users.conf\r
-\r
-# How to store passwords.\r
-# Valid values are plain, md5, or combined-md5. md5 is the hash of password.\r
-# combined-md5 is the hash of username.toLowerCase()+password.\r
-# Default is md5.\r
-#\r
-# SINCE 0.5.0 \r
-realm.passwordStorage = md5\r
-\r
-# Minimum valid length for a plain text password.\r
-# Default value is 5. Absolute minimum is 4.\r
-#\r
-# SINCE 0.5.0 \r
-realm.minPasswordLength = 5\r
-\r
-#\r
-# Gitblit Web Settings\r
-#\r
-# If blank Gitblit is displayed.\r
-#\r
-# SINCE 0.5.0\r
-web.siteName =\r
-\r
-# If *web.authenticateAdminPages*=true, users with "admin" role can create\r
-# repositories, create users, and edit repository metadata.\r
-#\r
-# If *web.authenticateAdminPages*=false, any user can execute the aforementioned\r
-# functions. \r
-#\r
-# SINCE 0.5.0 \r
-web.allowAdministration = true\r
-\r
-# Allows rpc clients to list repositories and possibly manage or administer the \r
-# Gitblit server, if the authenticated account has administrator permissions.\r
-# See *web.enableRpcManagement* and *web.enableRpcAdministration*.\r
-#\r
-# SINCE 0.7.0 \r
-web.enableRpcServlet = true\r
-\r
-# Allows rpc clients to manage repositories and users of the Gitblit instance,\r
-# if the authenticated account has administrator permissions.\r
-# Requires *web.enableRpcServlet=true*.\r
-#\r
-# SINCE 0.7.0 \r
-web.enableRpcManagement = false\r
-\r
-# Allows rpc clients to control the server settings and monitor the health of this\r
-# this Gitblit instance, if the authenticated account has administrator permissions.\r
-# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*.\r
-#\r
-# SINCE 0.7.0 \r
-web.enableRpcAdministration = false\r
-\r
-# Full path to a configurable robots.txt file. With this file you can control\r
-# what parts of your Gitblit server respectable robots are allowed to traverse.\r
-# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html\r
-#\r
-# SINCE 1.0.0\r
-web.robots.txt = \r
-\r
-# If true, the web ui layout will respond and adapt to the browser's dimensions.\r
-# if false, the web ui will use a 940px fixed-width layout.\r
-# http://twitter.github.com/bootstrap/scaffolding.html#responsive\r
-#\r
-# SINCE 1.0.0\r
-web.useResponsiveLayout = true\r
-\r
-# Allow Gravatar images to be displayed in Gitblit pages.\r
-#\r
-# SINCE 0.8.0\r
-web.allowGravatar = true\r
-\r
-# Allow dynamic zip downloads.\r
-#\r
-# SINCE 0.5.0 \r
-web.allowZipDownloads = true\r
-\r
-# If *web.allowZipDownloads=true* the following formats will be displayed for\r
-# download compressed archive links:\r
-#\r
-# zip = standard .zip\r
-# tar = standard tar format (preserves *nix permissions and symlinks)\r
-# gz = gz-compressed tar\r
-# xz = xz-compressed tar\r
-# bzip2 = bzip2-compressed tar\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.2.0\r
-web.compressedDownloads = zip gz\r
-\r
-# Allow optional Lucene integration. Lucene indexing is an opt-in feature.\r
-# A repository may specify branches to index with Lucene instead of using Git\r
-# commit traversal. There are scenarios where you may want to completely disable\r
-# Lucene indexing despite a repository specifying indexed branches. One such\r
-# scenario is on a resource-constrained federated Gitblit mirror.\r
-#\r
-# SINCE 0.9.0\r
-web.allowLuceneIndexing = true\r
-\r
-# Controls the length of shortened commit hash ids\r
-#\r
-# SINCE 1.2.0\r
-web.shortCommitIdLength = 6\r
-\r
-# Use Clippy (Flash solution) to provide a copy-to-clipboard button.\r
-# If false, a button with a more primitive JavaScript-based prompt box will\r
-# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.\r
-#\r
-# SINCE 0.8.0\r
-web.allowFlashCopyToClipboard = true\r
-\r
-# Default number of entries to include in RSS Syndication links\r
-#\r
-# SINCE 0.5.0\r
-web.syndicationEntries = 25\r
-\r
-# Show the size of each repository on the repositories page.\r
-# This requires recursive traversal of each repository folder. This may be\r
-# non-performant on some operating systems and/or filesystems. \r
-#\r
-# SINCE 0.5.2\r
-web.showRepositorySizes = true\r
-\r
-# List of custom regex expressions that can be displayed in the Filters menu\r
-# of the Repositories and Activity pages. Keep them very simple because you\r
-# are likely to run into encoding issues if they are too complex.\r
-#\r
-# Use !!! to separate the filters \r
-#\r
-# SINCE 0.8.0\r
-web.customFilters =\r
-\r
-# Show federation registrations (without token) and the current pull status\r
-# to non-administrator users. \r
-#\r
-# SINCE 0.6.0\r
-web.showFederationRegistrations = false\r
-\r
-# This is the message displayed when *web.authenticateViewPages=true*.\r
-# This can point to a file with Markdown content.\r
-# Specifying "gitblit" uses the internal login message.\r
-#\r
-# SINCE 0.7.0\r
-web.loginMessage = gitblit\r
-\r
-# This is the message displayed above the repositories table.\r
-# This can point to a file with Markdown content.\r
-# Specifying "gitblit" uses the internal welcome message.\r
-#\r
-# SINCE 0.5.0\r
-web.repositoriesMessage = gitblit\r
-\r
-# Ordered list of charsets/encodings to use when trying to display a blob.\r
-# If empty, UTF-8 and ISO-8859-1 are used. The server's default charset\r
-# is always appended to the encoding list. If all encodings fail to cleanly\r
-# decode the blob content, UTF-8 will be used with the standard malformed\r
-# input/unmappable character replacement strings.\r
-# \r
-# SPACE-DELIMITED\r
-# SINCE 1.0.0\r
-web.blobEncodings = UTF-8 ISO-8859-1\r
-\r
-# Manually set the default timezone to be used by Gitblit for display in the \r
-# web ui. This value is independent of the JVM timezone. Specifying a blank\r
-# value will default to the JVM timezone.\r
-# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin\r
-#\r
-# SINCE 0.9.0\r
-# RESTART REQUIRED\r
-web.timezone =\r
-\r
-# Use the client timezone when formatting dates.\r
-# This uses AJAX to determine the browser's timezone and may require more\r
-# server overhead because a Wicket session is created. All Gitblit pages\r
-# attempt to be stateless, if possible.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.useClientTimezone = false\r
-\r
-# Time format\r
-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>\r
-#\r
-# SINCE 0.8.0\r
-web.timeFormat = HH:mm\r
-\r
-# Short date format\r
-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>\r
-#\r
-# SINCE 0.5.0\r
-web.datestampShortFormat = yyyy-MM-dd\r
-\r
-# Long date format\r
-#\r
-# SINCE 0.8.0\r
-web.datestampLongFormat = EEEE, MMMM d, yyyy\r
-\r
-# Long timestamp format\r
-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>\r
-#\r
-# SINCE 0.5.0\r
-web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z\r
-\r
-# Mount URL parameters\r
-# This setting controls if pretty or parameter URLs are used.\r
-# i.e.\r
-# if true:\r
-# http://localhost/commit/myrepo/abcdef\r
-# if false:\r
-# http://localhost/commit/?r=myrepo&h=abcdef\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.mountParameters = true\r
-\r
-# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding\r
-# in URLs as a security precaution for proxies. This setting tells Gitblit\r
-# to preemptively replace '/' with '*' or '!' for url string parameters.\r
-#\r
-# <https://issues.apache.org/jira/browse/WICKET-1303>\r
-# <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>\r
-# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your\r
-# *CATALINA_OPTS* or to your JVM launch parameters\r
-#\r
-# SINCE 0.5.2\r
-web.forwardSlashCharacter = /\r
-\r
-# Show other URLs on the summary page for accessing your git repositories\r
-# Use spaces to separate urls. {0} is the token for the repository name.\r
-# e.g.\r
-# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0}\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.otherUrls = \r
-\r
-# Choose how to present the repositories list.\r
-# grouped = group nested/subfolder repositories together (no sorting)\r
-# flat = flat list of repositories (sorting allowed)\r
-#\r
-# SINCE 0.5.0\r
-web.repositoryListType = grouped\r
-\r
-# If using a grouped repository list and there are repositories at the\r
-# root level of your repositories folder, you may specify the displayed\r
-# group name with this setting. This value is only used for web presentation.\r
-#\r
-# SINCE 0.5.0\r
-web.repositoryRootGroupName = main\r
-\r
-# Display the repository swatch color next to the repository name link in the \r
-# repositories list. \r
-#\r
-# SINCE 0.8.0\r
-web.repositoryListSwatches = true\r
-\r
-# Choose the diff presentation style: gitblt, gitweb, or plain\r
-#\r
-# SINCE 0.5.0\r
-web.diffStyle = gitblit\r
-\r
-# Control if email addresses are shown in web ui\r
-#\r
-# SINCE 0.5.0\r
-web.showEmailAddresses = true\r
-\r
-# Shows a combobox in the page links header with commit, committer, and author\r
-# search selection. Default search is commit.\r
-#\r
-# SINCE 0.5.0\r
-web.showSearchTypeSelection = false\r
-\r
-# Generates a line graph of repository activity over time on the Summary page.\r
-# This uses the Google Charts API.\r
-#\r
-# SINCE 0.5.0 \r
-web.generateActivityGraph = true\r
-\r
-# The number of days to show on the activity page.\r
-# Value must exceed 0 else default of 14 is used\r
-#\r
-# SINCE 0.8.0\r
-web.activityDuration = 14\r
-\r
-# The number of commits to display on the summary page\r
-# Value must exceed 0 else default of 20 is used\r
-#\r
-# SINCE 0.5.0\r
-web.summaryCommitCount = 16\r
-\r
-# The number of tags/branches to display on the summary page.\r
-# -1 = all tags/branches\r
-# 0 = hide tags/branches\r
-# N = N tags/branches\r
-#\r
-# SINCE 0.5.0\r
-web.summaryRefsCount = 5\r
-\r
-# The number of items to show on a page before showing the first, prev, next\r
-# pagination links. A default if 50 is used for any invalid value.\r
-#\r
-# SINCE 0.5.0\r
-web.itemsPerPage = 50\r
-\r
-# Registered file extensions to ignore during Lucene indexing\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.9.0\r
-web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt png so swf xcf xls xlsx zip\r
-\r
-# Registered extensions for google-code-prettify\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.prettyPrintExtensions = c cpp cs css frm groovy htm html java js php pl prefs properties py rb scala sh sql xml vb\r
-\r
-# Registered extensions for markdown transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.5.0\r
-web.markdownExtensions = md mkd markdown MD MKD\r
-\r
-# Image extensions\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.imageExtensions = bmp jpg gif png \r
-\r
-# Registered extensions for binary blobs\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.binaryExtensions = jar pdf tar.gz zip\r
-\r
-# Aggressive heap management will run the garbage collector on every generated\r
-# page. This slows down page generation a little but improves heap consumption. \r
-#\r
-# SINCE 0.5.0\r
-web.aggressiveHeapManagement = false\r
-\r
-# Run the webapp in debug mode\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.debugMode = false\r
-\r
-# Enable/disable global regex substitutions (i.e. shared across repositories)\r
-#\r
-# SINCE 0.5.0\r
-regex.global = true\r
-\r
-# Example global regex substitutions\r
-# Use !!! to separate the search pattern and the replace pattern\r
-# searchpattern!!!replacepattern\r
-# SINCE 0.5.0\r
-regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!<a href="http://somehost/bug/$3">Bug-Id: $3</a>\r
-# SINCE 0.5.0\r
-regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!<a href="http://somehost/changeid/$2">Change-Id: $2</a>\r
-\r
-# Example per-repository regex substitutions overrides global\r
-# SINCE 0.5.0\r
-regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!<a href="http://elsewhere/bug/$3">Bug-Id: $3</a>\r
-\r
-#\r
-# Mail Settings\r
-# SINCE 0.6.0\r
-#\r
-# Mail settings are used to notify administrators of received federation proposals\r
-#\r
-\r
-# ip or hostname of smtp server\r
-#\r
-# SINCE 0.6.0\r
-mail.server =\r
-\r
-# port to use for smtp requests\r
-#\r
-# SINCE 0.6.0\r
-mail.port = 25\r
-\r
-# debug the mail executor\r
-#\r
-# SINCE 0.6.0\r
-mail.debug = false\r
-\r
-# if your smtp server requires authentication, supply the credentials here\r
-#\r
-# SINCE 0.6.0\r
-mail.username =\r
-# SINCE 0.6.0\r
-mail.password =\r
-\r
-# from address for generated emails\r
-#\r
-# SINCE 0.6.0\r
-mail.fromAddress = \r
-\r
-# List of email addresses for the Gitblit administrators\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.6.0\r
-mail.adminAddresses = \r
-\r
-# List of email addresses for sending push email notifications.\r
-#\r
-# This key currently requires use of the sendemail.groovy hook script.\r
-# If you set sendemail.groovy in *groovy.postReceiveScripts* then email\r
-# notifications for all repositories (regardless of access restrictions!)\r
-# will be sent to these addresses.\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.8.0\r
-mail.mailingLists =\r
-\r
-#\r
-# Federation Settings\r
-# SINCE 0.6.0\r
-#\r
-# A Gitblit federation is a way to backup one Gitblit instance to another.\r
-#\r
-# *git.enableGitServlet* must be true to use this feature.\r
-\r
-# Your federation name is used for federation status acknowledgments. If it is\r
-# unset, and you elect to send a status acknowledgment, your Gitblit instance\r
-# will be identified by its hostname, if available, else your internal ip address.\r
-# The source Gitblit instance will also append your external IP address to your\r
-# identification to differentiate multiple pulling systems behind a single proxy.\r
-#\r
-# SINCE 0.6.0\r
-federation.name =\r
-\r
-# Specify the passphrase of this Gitblit instance.\r
-#\r
-# An unspecified (empty) passphrase disables processing federation requests.\r
-#\r
-# This value can be anything you want: an integer, a sentence, an haiku, etc.\r
-# Keep the value simple, though, to avoid Java properties file encoding issues.\r
-#\r
-# Changing your passphrase will break any registrations you have established with other\r
-# Gitblit instances.\r
-#\r
-# CASE-SENSITIVE\r
-# SINCE 0.6.0\r
-# RESTART REQUIRED *(only to enable or disable federation)*\r
-federation.passphrase =\r
-\r
-# Control whether or not this Gitblit instance can receive federation proposals\r
-# from another Gitblit instance. Registering a federated Gitblit is a manual\r
-# process. Proposals help to simplify that process by allowing a remote Gitblit\r
-# instance to send your Gitblit instance the federation pull data.\r
-#\r
-# SINCE 0.6.0\r
-federation.allowProposals = false\r
-\r
-# The destination folder for cached federation proposals.\r
-# Use forward slashes even on Windows!!\r
-#\r
-# SINCE 0.6.0\r
-federation.proposalsFolder = proposals\r
-\r
-# The default pull frequency if frequency is unspecified on a registration\r
-#\r
-# SINCE 0.6.0\r
-federation.defaultFrequency = 60 mins\r
-\r
-# Federation Sets are named groups of repositories. The Federation Sets are \r
-# available for selection in the repository settings page. You can assign a\r
-# repository to one or more sets and then distribute the token for the set.\r
-# This allows you to grant federation pull access to a subset of your available\r
-# repositories. Tokens for federation sets only grant repository pull access.\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.6.0\r
-federation.sets = \r
-\r
-# Federation pull registrations\r
-# Registrations are read once, at startup.\r
-#\r
-# RESTART REQUIRED\r
-#\r
-# frequency:\r
-# The shortest frequency allowed is every 5 minutes\r
-# Decimal frequency values are cast to integers\r
-# Frequency values may be specified in mins, hours, or days\r
-# Values that can not be parsed or are unspecified default to *federation.defaultFrequency*\r
-#\r
-# folder:\r
-# if unspecified, the folder is *git.repositoriesFolder*\r
-# if specified, the folder is relative to *git.repositoriesFolder*\r
-#\r
-# bare:\r
-# if true, each repository will be created as a *bare* repository and will not\r
-# have a working directory.\r
-#\r
-# if false, each repository will be created as a normal repository suitable\r
-# for local work.\r
-#\r
-# mirror:\r
-# if true, each repository HEAD is reset to *origin/master* after each pull.\r
-# The repository will be flagged *isFrozen* after the initial clone.\r
-#\r
-# if false, each repository HEAD will point to the FETCH_HEAD of the initial\r
-# clone from the origin until pushed to or otherwise manipulated.\r
-#\r
-# mergeAccounts:\r
-# if true, remote accounts and their permissions are merged into your \r
-# users.properties file \r
-#\r
-# notifyOnError:\r
-# if true and the mail configuration is properly set, administrators will be\r
-# notified by email of pull failures\r
-#\r
-# include and exclude:\r
-# Space-delimited list of repositories to include or exclude from pull\r
-# may be * wildcard to include or exclude all\r
-# may use fuzzy match (e.g. org.eclipse.*)\r
-\r
-#\r
-# (Nearly) Perfect Mirror example\r
-#\r
-\r
-#federation.example1.url = https://go.gitblit.com\r
-#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4\r
-#federation.example1.frequency = 120 mins\r
-#federation.example1.folder =\r
-#federation.example1.bare = true \r
-#federation.example1.mirror = true \r
-#federation.example1.mergeAccounts = true\r
-\r
-#\r
-# Advanced Realm Settings\r
-#\r
-\r
-# URL of the LDAP server.\r
-# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to\r
-# send StartTLS command.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.server = ldap://localhost\r
-\r
-# Login username for LDAP searches.\r
-# If this value is unspecified, anonymous LDAP login will be used.\r
-# \r
-# e.g. mydomain\\username\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.username = cn=Directory Manager\r
-\r
-# Login password for LDAP searches.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.password = password\r
-\r
-# The LdapUserService must be backed by another user service for standard user\r
-# and team management.\r
-# default: users.conf\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-realm.ldap.backingUserService = users.conf\r
-\r
-# Delegate team membership control to LDAP.\r
-#\r
-# If true, team user memberships will be specified by LDAP groups. This will\r
-# disable team selection in Edit User and user selection in Edit Team.\r
-#\r
-# If false, LDAP will only be used for authentication and Gitblit will maintain\r
-# team memberships with the *realm.ldap.backingUserService*.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.maintainTeams = false\r
-\r
-# Root node for all LDAP users\r
-#\r
-# This is the root node from which subtree user searches will begin.\r
-# If blank, Gitblit will search ALL nodes.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain\r
-\r
-# Filter criteria for LDAP users\r
-#\r
-# Query pattern to use when searching for a user account. This may be any valid \r
-# LDAP query expression, including the standard (&) and (|) operators.\r
-#\r
-# Variables may be injected via the ${variableName} syntax.\r
-# Recognized variables are:\r
-# ${username} - The text entered as the user name\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))\r
-\r
-# Root node for all LDAP groups to be used as Gitblit Teams\r
-#\r
-# This is the root node from which subtree team searches will begin.\r
-# If blank, Gitblit will search ALL nodes. \r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain\r
-\r
-# Filter criteria for LDAP groups\r
-#\r
-# Query pattern to use when searching for a team. This may be any valid \r
-# LDAP query expression, including the standard (&) and (|) operators.\r
-#\r
-# Variables may be injected via the ${variableName} syntax.\r
-# Recognized variables are:\r
-# ${username} - The text entered as the user name\r
-# ${dn} - The Distinguished Name of the user logged in\r
-#\r
-# All attributes from the LDAP User record are available. For example, if a user\r
-# has an attribute "fullName" set to "John", "(fn=${fullName})" will be \r
-# translated to "(fn=John)".\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))\r
-\r
-# LDAP users or groups that should be given administrator privileges.\r
-#\r
-# Teams are specified with a leading '@' character. Groups with spaces in the\r
-# name can be entered as "@team name".\r
-#\r
-# e.g. realm.ldap.admins = john @git_admins "@git admins"\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.0.0\r
-realm.ldap.admins = @Git_Admins\r
-\r
-# Attribute(s) on the USER record that indicate their display (or full) name.\r
-# Leave blank for no mapping available in LDAP.\r
-#\r
-# This may be a single attribute, or a string of multiple attributes. Examples:\r
-# displayName - Uses the attribute 'displayName' on the user record\r
-# ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 \r
-# attributes together, with a '.' after personalTitle\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.displayName = displayName\r
-\r
-# Attribute(s) on the USER record that indicate their email address.\r
-# Leave blank for no mapping available in LDAP.\r
-#\r
-# This may be a single attribute, or a string of multiple attributes. Examples:\r
-# email - Uses the attribute 'email' on the user record\r
-# ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes\r
-# together with a '.' and '@' creating something like first.last@gitblit.com \r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.email = email\r
-\r
-# The RedmineUserService must be backed by another user service for standard user\r
-# and team management.\r
-# default: users.conf\r
-#\r
-# RESTART REQUIRED\r
-realm.redmine.backingUserService = users.conf\r
-\r
-# URL of the Redmine.\r
-realm.redmine.url = http://example.com/redmine\r
-\r
-#\r
-# Server Settings\r
-#\r
-\r
-# The temporary folder to decompress the embedded gitblit webapp. \r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.tempFolder = temp\r
-\r
-# Use Jetty NIO connectors. If false, Jetty Socket connectors will be used.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.useNio = true\r
-\r
-# Context path for the GO application. You might want to change the context\r
-# path if running Gitblit behind a proxy layer such as mod_proxy.\r
-#\r
-# SINCE 0.7.0\r
-# RESTART REQUIRED\r
-server.contextPath = /\r
-\r
-# Standard http port to serve. <= 0 disables this connector.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 80 or 8080\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpPort = 0\r
-\r
-# Secure/SSL https port to serve. <= 0 disables this connector.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 443 or 8443\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpsPort = 8443\r
-\r
-# Port for serving an Apache JServ Protocol (AJP) 1.3 connector for integrating\r
-# Gitblit GO into an Apache HTTP server setup. <= 0 disables this connector.\r
-# Recommended value: 8009\r
-#\r
-# SINCE 0.9.0\r
-# RESTART REQUIRED\r
-server.ajpPort = 0\r
-\r
-# Specify the interface for Jetty to bind the standard connector.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpBindInterface = localhost\r
-\r
-# Specify the interface for Jetty to bind the secure connector.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpsBindInterface = localhost\r
-\r
-# Specify the interface for Jetty to bind the AJP connector.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 0.9.0\r
-# RESTART REQUIRED\r
-server.ajpBindInterface = localhost\r
-\r
-# Password for SSL keystore.\r
-# Keystore password and certificate password must match.\r
-# This is provided for convenience, its probably more secure to set this value\r
-# using the --storePassword command line parameter.\r
-#\r
-# If you are using the official JRE or JDK from Oracle you may not have the\r
-# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM. Because\r
-# of this, your store/key password can not exceed 7 characters. If you require\r
-# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction\r
-# Policy files from Oracle.\r
-#\r
-# http://www.oracle.com/technetwork/java/javase/downloads/index.html\r
-#\r
-# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited\r
-# Strength encryption is available.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.storePassword = gitblit\r
-\r
-# If serving over https (recommended) you might consider requiring clients to\r
-# authenticate with ssl certificates. If enabled, only https clients with the\r
-# a valid client certificate will be able to access Gitblit.\r
-#\r
-# If disabled, client certificate authentication is optional and will be tried\r
-# first before falling-back to form authentication or basic authentication.\r
-#\r
-# Requiring client certificates to access any of Gitblit may be too extreme,\r
-# consider this carefully.\r
-#\r
-# SINCE 1.2.0\r
-# RESTART REQUIRED\r
-server.requireClientCertificates = false\r
-\r
-# Port for shutdown monitor to listen on.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.shutdownPort = 8081
+#
+# Git Servlet Settings
+#
+
+# Base folder for repositories.
+# This folder may contain bare and non-bare repositories but Gitblit will only
+# allow you to push to bare repositories.
+# Use forward slashes even on Windows!!
+# e.g. c:/gitrepos
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+git.repositoriesFolder = git
+
+# Build the available repository list at startup and cache this list for reuse.
+# This reduces disk io when presenting the repositories page, responding to rpcs,
+# etc, but it means that Gitblit will not automatically identify repositories
+# added or deleted by external tools.
+#
+# For this case you can use curl, wget, etc to issue an rpc request to clear the
+# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)
+#
+# SINCE 1.1.0
+git.cacheRepositoryList = true
+
+# Search the repositories folder subfolders for other repositories.
+# Repositories MAY NOT be nested (i.e. one repository within another)
+# but they may be grouped together in subfolders.
+# e.g. c:/gitrepos/libraries/mylibrary.git
+# c:/gitrepos/libraries/myotherlibrary.git
+#
+# SINCE 0.5.0
+git.searchRepositoriesSubfolders = true
+
+# Maximum number of folders to recurse into when searching for repositories.
+# The default value, -1, disables depth limits.
+#
+# SINCE 1.1.0
+git.searchRecursionDepth = -1
+
+# List of regex exclusion patterns to match against folders found in
+# *git.repositoriesFolder*.
+# Use forward slashes even on Windows!!
+# e.g. test/jgit\.git
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.searchExclusions =
+
+# List of regex url patterns for extracting a repository name when locating
+# submodules.
+# e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract
+# *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*
+# If no matches are found then the submodule repository name is assumed to be
+# whatever trails the last / character. (e.g. gitblit.git).
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.submoduleUrlPatterns = .*?://github.com/(.*)
+
+# Allow push/pull over http/https with JGit servlet.
+# If you do NOT want to allow Git clients to clone/push to Gitblit set this
+# to false. You might want to do this if you are only using ssh:// or git://.
+# If you set this false, consider changing the *web.otherUrls* setting to
+# indicate your clone/push urls.
+#
+# SINCE 0.5.0
+git.enableGitServlet = true
+
+# If you want to restrict all git servlet access to those with valid X509 client
+# certificates then set this value to true.
+#
+# SINCE 1.2.0
+git.requiresClientCertificate = false
+
+# Enforce date checks on client certificates to ensure that they are not being
+# used prematurely and that they have not expired.
+#
+# SINCE 1.2.0
+git.enforceCertificateValidity = true
+
+# List of OIDs to extract from a client certificate DN to map a certificate to
+# an account username.
+#
+# e.g. git.certificateUsernameOIDs = CN
+# e.g. git.certificateUsernameOIDs = FirstName LastName
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+git.certificateUsernameOIDs = CN
+
+# Only serve/display bare repositories.
+# If there are non-bare repositories in git.repositoriesFolder and this setting
- # is true, they will be excluded from the ui.
++# is true, they will be excluded from the ui.
+#
+# SINCE 0.9.0
+git.onlyAccessBareRepositories = false
+
+# Allow an authenticated user to create a destination repository on a push if
+# the repository does not already exist.
+#
+# Administrator accounts can create a repository in any project.
+# These repositories are created with the default access restriction and authorization
+# control values. The pushing account is set as the owner.
+#
+# Non-administrator accounts with the CREATE role may create personal repositories.
+# These repositories are created as VIEW restricted for NAMED users.
+# The pushing account is set as the owner.
+#
+# SINCE 1.2.0
+git.allowCreateOnPush = true
+
+# The default access restriction for new repositories.
+# Valid values are NONE, PUSH, CLONE, VIEW
+# NONE = anonymous view, clone, & push
+# PUSH = anonymous view & clone and authenticated push
+# CLONE = anonymous view, authenticated clone & push
+# VIEW = authenticated view, clone, & push
+#
+# SINCE 1.0.0
+git.defaultAccessRestriction = NONE
+
+# The default authorization control for new repositories.
+# Valid values are AUTHENTICATED and NAMED
+# AUTHENTICATED = any authenticated user is granted restricted access
+# NAMED = only named users/teams are granted restricted access
+#
+# SINCE 1.1.0
+git.defaultAuthorizationControl = NAMED
+
+# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)
+#
+# USE AT YOUR OWN RISK!
+#
+# If enabled, the garbage collection executor scans all repositories once a day
+# at the hour of your choosing. The GC executor will take each repository "offline",
+# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.
+#
+# While the repository is offline it will be inaccessible from the web UI or from
+# any of the other services (git, rpc, rss, etc).
+#
+# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,
+# especially on Windows systems, so if you are using other tools please coordinate
+# their usage with your GC Executor schedule or do not use this feature.
+#
+# The GC algorithm complex and the JGit team advises caution when using their
+# young implementation of GC.
+#
+# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics
+#
+# EXPERIMENTAL
+# SINCE 1.2.0
+# RESTART REQUIRED
+git.enableGarbageCollection = false
+
+# Hour of the day for the GC Executor to scan repositories.
+# This value is in 24-hour time.
+#
+# SINCE 1.2.0
+git.garbageCollectionHour = 0
+
+# The default minimum total filesize of loose objects to trigger early garbage
+# collection.
+#
+# You may specify a custom threshold for a repository in the repository's settings.
+# Common unit suffixes of k, m, or g are supported.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionThreshold = 500k
+
+# The default period, in days, between GCs for a repository. If the total filesize
+# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's
- # custom threshold, this period will be short-circuited.
++# custom threshold, this period will be short-circuited.
+#
+# e.g. if a repository collects 100KB of loose objects every day with a 500KB
+# threshold and a period of 7 days, it will take 5 days for the loose objects to
+# be collected, packed, and pruned.
+#
+# OR
+#
+# if a repository collects 10KB of loose objects every day with a 500KB threshold
+# and a period of 7 days, it will take the full 7 days for the loose objects to be
+# collected, packed, and pruned.
+#
+# You may specify a custom period for a repository in the repository's settings.
+#
+# The minimum value is 1 day since the GC Executor only runs once a day.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionPeriod = 7
+
+# Number of bytes of a pack file to load into memory in a single read operation.
+# This is the "page size" of the JGit buffer cache, used for all pack access
+# operations. All disk IO occurs as single window reads. Setting this too large
+# may cause the process to load more data than is required; setting this too small
+# may increase the frequency of read() system calls.
+#
+# Default on JGit is 8 KiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitWindowSize = 8k
+
+# Maximum number of bytes to load and cache in memory from pack files. If JGit
+# needs to access more than this many bytes it will unload less frequently used
+# windows to reclaim memory space within the process. As this buffer must be shared
+# with the rest of the JVM heap, it should be a fraction of the total memory available.
+#
+# The JGit team recommends setting this value larger than the size of your biggest
+# repository. This ensures you can serve most requests from memory.
+#
+# Default on JGit is 10 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitLimit = 10m
+
+# Maximum number of bytes to reserve for caching base objects that multiple deltafied
+# objects reference. By storing the entire decompressed base object in a cache Git
+# is able to avoid unpacking and decompressing frequently used base objects multiple times.
+#
+# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust
+# this value.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.deltaBaseCacheLimit = 10m
+
+# Maximum number of pack files to have open at once. A pack file must be opened
+# in order for any of its data to be available in a cached window.
+#
+# If you increase this to a larger setting you may need to also adjust the ulimit
+# on file descriptors for the host JVM, as Gitblit needs additional file descriptors
+# available for network sockets and other repository data manipulation.
+#
+# Default on JGit is 128 file descriptors on all platforms.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitOpenFiles = 128
+
+# Largest object size, in bytes, that JGit will allocate as a contiguous byte
+# array. Any file revision larger than this threshold will have to be streamed,
+# typically requiring the use of temporary files under $GIT_DIR/objects to implement
+# psuedo-random access during delta decompression.
+#
+# Servers with very high traffic should set this to be larger than the size of
+# their common big files. For example a server managing the Android platform
+# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable
+# setting in that environment. Setting this too high may cause the JVM to run out
+# of heap space when handling very big binary files, such as device firmware or
- # CD-ROM ISO images. Make sure to adjust your JVM heap accordingly.
++# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly.
+#
+# Default is 50 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.streamFileThreshold = 50m
+
+# When true, JGit will use mmap() rather than malloc()+read() to load data from
+# pack files. The use of mmap can be problematic on some JVMs as the garbage
+# collector must deduce that a memory mapped segment is no longer in use before
+# a call to munmap() can be made by the JVM native code.
+#
+# In server applications (such as Gitblit) that need to access many pack files,
- # setting this to true risks artificially running out of virtual address space,
++# setting this to true risks artificially running out of virtual address space,
+# as the garbage collector cannot reclaim unused mapped spaces fast enough.
+#
+# Default on JGit is false. Although potentially slower, it yields much more
+# predictable behavior.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitMmap = false
+
+#
+# Groovy Integration
+#
+
+# Location of Groovy scripts to use for Pre and Post receive hooks.
+# Use forward slashes even on Windows!!
+# e.g. c:/groovy
+#
+# RESTART REQUIRED
+# SINCE 0.8.0
+groovy.scriptsFolder = groovy
+
+# Specify the directory Grape uses for downloading libraries.
+# http://groovy.codehaus.org/Grape
+#
+# RESTART REQUIRED
+# SINCE 1.0.0
+groovy.grapeFolder = groovy/grape
+
+# Scripts to execute on Pre-Receive.
+#
+# These scripts execute after an incoming push has been parsed and validated
+# but BEFORE the changes are applied to the repository. You might reject a
+# push in this script based on the repository and branch the push is attempting
+# to change.
+#
+# Script names are case-sensitive on case-sensitive file systems. You may omit
- # the traditional ".groovy" from this list if your file extension is ".groovy"
++# the traditional ".groovy" from this list if your file extension is ".groovy"
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using. Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts! Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.preReceiveScripts =
+
+# Scripts to execute on Post-Receive.
+#
+# These scripts execute AFTER an incoming push has been applied to a repository.
+# You might trigger a continuous-integration build here or send a notification.
+#
+# Script names are case-sensitive on case-sensitive file systems. You may omit
- # the traditional ".groovy" from this list if your file extension is ".groovy"
++# the traditional ".groovy" from this list if your file extension is ".groovy"
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using. Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts! Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
- #
++#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.postReceiveScripts =
+
+# Repository custom fields for Groovy Hook mechanism
+#
+# List of key=label pairs of custom fields to prompt for in the Edit Repository
- # page. These keys are stored in the repository's git config file in the
++# page. These keys are stored in the repository's git config file in the
+# section [gitblit "customFields"]. Key names are alphanumeric only. These
+# fields are intended to be used for the Groovy hook mechanism where a script
+# can adjust it's execution based on the custom fields stored in the repository
+# config.
+#
+# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
- groovy.customFields =
++groovy.customFields =
+
+#
+# Authentication Settings
+#
+
+# Require authentication to see everything but the admin pages
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.authenticateViewPages = false
+
+# Require admin authentication for the admin functions and pages
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.authenticateAdminPages = true
+
+# Allow Gitblit to store a cookie in the user's browser for automatic
+# authentication. The cookie is generated by the user service.
+#
+# SINCE 0.5.0
+web.allowCookieAuthentication = true
+
+# Config file for storing project metadata
+#
+# SINCE 1.2.0
+web.projectsFile = projects.conf
+
+# Either the full path to a user config file (users.conf)
+# OR the full path to a simple user properties file (users.properties)
+# OR a fully qualified class name that implements the IUserService interface.
+#
+# Alternative user services:
+# com.gitblit.LdapUserService
+# com.gitblit.RedmineUserService
+#
+# Any custom user service implementation must have a public default constructor.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+realm.userService = users.conf
+
+# How to store passwords.
+# Valid values are plain, md5, or combined-md5. md5 is the hash of password.
+# combined-md5 is the hash of username.toLowerCase()+password.
+# Default is md5.
+#
- # SINCE 0.5.0
++# SINCE 0.5.0
+realm.passwordStorage = md5
+
+# Minimum valid length for a plain text password.
+# Default value is 5. Absolute minimum is 4.
+#
- # SINCE 0.5.0
++# SINCE 0.5.0
+realm.minPasswordLength = 5
+
+#
+# Gitblit Web Settings
+#
+# If blank Gitblit is displayed.
+#
+# SINCE 0.5.0
+web.siteName =
+
+# If *web.authenticateAdminPages*=true, users with "admin" role can create
+# repositories, create users, and edit repository metadata.
+#
+# If *web.authenticateAdminPages*=false, any user can execute the aforementioned
- # functions.
++# functions.
+#
- # SINCE 0.5.0
++# SINCE 0.5.0
+web.allowAdministration = true
+
- # Allows rpc clients to list repositories and possibly manage or administer the
++# Allows rpc clients to list repositories and possibly manage or administer the
+# Gitblit server, if the authenticated account has administrator permissions.
+# See *web.enableRpcManagement* and *web.enableRpcAdministration*.
+#
- # SINCE 0.7.0
++# SINCE 0.7.0
+web.enableRpcServlet = true
+
+# Allows rpc clients to manage repositories and users of the Gitblit instance,
+# if the authenticated account has administrator permissions.
+# Requires *web.enableRpcServlet=true*.
+#
- # SINCE 0.7.0
++# SINCE 0.7.0
+web.enableRpcManagement = false
+
+# Allows rpc clients to control the server settings and monitor the health of this
+# this Gitblit instance, if the authenticated account has administrator permissions.
+# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*.
+#
- # SINCE 0.7.0
++# SINCE 0.7.0
+web.enableRpcAdministration = false
+
+# Full path to a configurable robots.txt file. With this file you can control
+# what parts of your Gitblit server respectable robots are allowed to traverse.
+# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html
+#
+# SINCE 1.0.0
- web.robots.txt =
++web.robots.txt =
+
+# If true, the web ui layout will respond and adapt to the browser's dimensions.
+# if false, the web ui will use a 940px fixed-width layout.
+# http://twitter.github.com/bootstrap/scaffolding.html#responsive
+#
+# SINCE 1.0.0
+web.useResponsiveLayout = true
+
+# Allow Gravatar images to be displayed in Gitblit pages.
+#
+# SINCE 0.8.0
+web.allowGravatar = true
+
+# Allow dynamic zip downloads.
+#
- # SINCE 0.5.0
++# SINCE 0.5.0
+web.allowZipDownloads = true
+
++# If *web.allowZipDownloads=true* the following formats will be displayed for
++# download compressed archive links:
++#
++# zip = standard .zip
++# tar = standard tar format (preserves *nix permissions and symlinks)
++# gz = gz-compressed tar
++# xz = xz-compressed tar
++# bzip2 = bzip2-compressed tar
++#
++# SPACE-DELIMITED
++# SINCE 1.2.0
++web.compressedDownloads = zip gz
++
+# Allow optional Lucene integration. Lucene indexing is an opt-in feature.
+# A repository may specify branches to index with Lucene instead of using Git
+# commit traversal. There are scenarios where you may want to completely disable
+# Lucene indexing despite a repository specifying indexed branches. One such
+# scenario is on a resource-constrained federated Gitblit mirror.
+#
+# SINCE 0.9.0
+web.allowLuceneIndexing = true
+
+# Controls the length of shortened commit hash ids
+#
+# SINCE 1.2.0
+web.shortCommitIdLength = 6
+
+# Use Clippy (Flash solution) to provide a copy-to-clipboard button.
+# If false, a button with a more primitive JavaScript-based prompt box will
+# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.
+#
+# SINCE 0.8.0
+web.allowFlashCopyToClipboard = true
+
+# Default number of entries to include in RSS Syndication links
+#
+# SINCE 0.5.0
+web.syndicationEntries = 25
+
+# Show the size of each repository on the repositories page.
+# This requires recursive traversal of each repository folder. This may be
- # non-performant on some operating systems and/or filesystems.
++# non-performant on some operating systems and/or filesystems.
+#
+# SINCE 0.5.2
+web.showRepositorySizes = true
+
+# List of custom regex expressions that can be displayed in the Filters menu
+# of the Repositories and Activity pages. Keep them very simple because you
+# are likely to run into encoding issues if they are too complex.
+#
- # Use !!! to separate the filters
++# Use !!! to separate the filters
+#
+# SINCE 0.8.0
+web.customFilters =
+
+# Show federation registrations (without token) and the current pull status
- # to non-administrator users.
++# to non-administrator users.
+#
+# SINCE 0.6.0
+web.showFederationRegistrations = false
+
+# This is the message displayed when *web.authenticateViewPages=true*.
+# This can point to a file with Markdown content.
+# Specifying "gitblit" uses the internal login message.
+#
+# SINCE 0.7.0
+web.loginMessage = gitblit
+
+# This is the message displayed above the repositories table.
+# This can point to a file with Markdown content.
+# Specifying "gitblit" uses the internal welcome message.
+#
+# SINCE 0.5.0
+web.repositoriesMessage = gitblit
+
+# Ordered list of charsets/encodings to use when trying to display a blob.
+# If empty, UTF-8 and ISO-8859-1 are used. The server's default charset
+# is always appended to the encoding list. If all encodings fail to cleanly
+# decode the blob content, UTF-8 will be used with the standard malformed
+# input/unmappable character replacement strings.
- #
++#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+web.blobEncodings = UTF-8 ISO-8859-1
+
- # Manually set the default timezone to be used by Gitblit for display in the
++# Manually set the default timezone to be used by Gitblit for display in the
+# web ui. This value is independent of the JVM timezone. Specifying a blank
+# value will default to the JVM timezone.
+# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+web.timezone =
+
+# Use the client timezone when formatting dates.
+# This uses AJAX to determine the browser's timezone and may require more
+# server overhead because a Wicket session is created. All Gitblit pages
+# attempt to be stateless, if possible.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.useClientTimezone = false
+
+# Time format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.8.0
+web.timeFormat = HH:mm
+
+# Short date format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.5.0
+web.datestampShortFormat = yyyy-MM-dd
+
+# Long date format
+#
+# SINCE 0.8.0
+web.datestampLongFormat = EEEE, MMMM d, yyyy
+
+# Long timestamp format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.5.0
+web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z
+
+# Mount URL parameters
+# This setting controls if pretty or parameter URLs are used.
+# i.e.
+# if true:
+# http://localhost/commit/myrepo/abcdef
+# if false:
+# http://localhost/commit/?r=myrepo&h=abcdef
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.mountParameters = true
+
+# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding
+# in URLs as a security precaution for proxies. This setting tells Gitblit
+# to preemptively replace '/' with '*' or '!' for url string parameters.
+#
+# <https://issues.apache.org/jira/browse/WICKET-1303>
+# <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>
+# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your
+# *CATALINA_OPTS* or to your JVM launch parameters
+#
+# SINCE 0.5.2
+web.forwardSlashCharacter = /
+
+# Show other URLs on the summary page for accessing your git repositories
+# Use spaces to separate urls. {0} is the token for the repository name.
+# e.g.
+# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0}
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
- web.otherUrls =
++web.otherUrls =
+
+# Choose how to present the repositories list.
+# grouped = group nested/subfolder repositories together (no sorting)
+# flat = flat list of repositories (sorting allowed)
+#
+# SINCE 0.5.0
+web.repositoryListType = grouped
+
+# If using a grouped repository list and there are repositories at the
+# root level of your repositories folder, you may specify the displayed
+# group name with this setting. This value is only used for web presentation.
+#
+# SINCE 0.5.0
+web.repositoryRootGroupName = main
+
- # Display the repository swatch color next to the repository name link in the
- # repositories list.
++# Display the repository swatch color next to the repository name link in the
++# repositories list.
+#
+# SINCE 0.8.0
+web.repositoryListSwatches = true
+
+# Choose the diff presentation style: gitblt, gitweb, or plain
+#
+# SINCE 0.5.0
+web.diffStyle = gitblit
+
+# Control if email addresses are shown in web ui
+#
+# SINCE 0.5.0
+web.showEmailAddresses = true
+
+# Shows a combobox in the page links header with commit, committer, and author
+# search selection. Default search is commit.
+#
+# SINCE 0.5.0
+web.showSearchTypeSelection = false
+
+# Generates a line graph of repository activity over time on the Summary page.
+# This uses the Google Charts API.
+#
- # SINCE 0.5.0
++# SINCE 0.5.0
+web.generateActivityGraph = true
+
+# The number of days to show on the activity page.
+# Value must exceed 0 else default of 14 is used
+#
+# SINCE 0.8.0
+web.activityDuration = 14
+
+# The number of commits to display on the summary page
+# Value must exceed 0 else default of 20 is used
+#
+# SINCE 0.5.0
+web.summaryCommitCount = 16
+
+# The number of tags/branches to display on the summary page.
+# -1 = all tags/branches
+# 0 = hide tags/branches
+# N = N tags/branches
+#
+# SINCE 0.5.0
+web.summaryRefsCount = 5
+
+# The number of items to show on a page before showing the first, prev, next
+# pagination links. A default if 50 is used for any invalid value.
+#
+# SINCE 0.5.0
+web.itemsPerPage = 50
+
+# Registered file extensions to ignore during Lucene indexing
+#
+# SPACE-DELIMITED
+# SINCE 0.9.0
+web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt png so swf xcf xls xlsx zip
+
+# Registered extensions for google-code-prettify
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.prettyPrintExtensions = c cpp cs css frm groovy htm html java js php pl prefs properties py rb scala sh sql xml vb
+
+# Registered extensions for markdown transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.5.0
+web.markdownExtensions = md mkd markdown MD MKD
+
+# Image extensions
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
- web.imageExtensions = bmp jpg gif png
++web.imageExtensions = bmp jpg gif png
+
+# Registered extensions for binary blobs
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.binaryExtensions = jar pdf tar.gz zip
+
+# Aggressive heap management will run the garbage collector on every generated
- # page. This slows down page generation a little but improves heap consumption.
++# page. This slows down page generation a little but improves heap consumption.
+#
+# SINCE 0.5.0
+web.aggressiveHeapManagement = false
+
+# Run the webapp in debug mode
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.debugMode = false
+
+# Enable/disable global regex substitutions (i.e. shared across repositories)
+#
+# SINCE 0.5.0
+regex.global = true
+
+# Example global regex substitutions
+# Use !!! to separate the search pattern and the replace pattern
+# searchpattern!!!replacepattern
+# SINCE 0.5.0
+regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!<a href="http://somehost/bug/$3">Bug-Id: $3</a>
+# SINCE 0.5.0
+regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!<a href="http://somehost/changeid/$2">Change-Id: $2</a>
+
+# Example per-repository regex substitutions overrides global
+# SINCE 0.5.0
+regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!<a href="http://elsewhere/bug/$3">Bug-Id: $3</a>
+
+#
+# Mail Settings
+# SINCE 0.6.0
+#
+# Mail settings are used to notify administrators of received federation proposals
+#
+
+# ip or hostname of smtp server
+#
+# SINCE 0.6.0
+mail.server =
+
+# port to use for smtp requests
+#
+# SINCE 0.6.0
+mail.port = 25
+
+# debug the mail executor
+#
+# SINCE 0.6.0
+mail.debug = false
+
+# if your smtp server requires authentication, supply the credentials here
+#
+# SINCE 0.6.0
+mail.username =
+# SINCE 0.6.0
+mail.password =
+
+# from address for generated emails
+#
+# SINCE 0.6.0
- mail.fromAddress =
++mail.fromAddress =
+
+# List of email addresses for the Gitblit administrators
+#
+# SPACE-DELIMITED
+# SINCE 0.6.0
- mail.adminAddresses =
++mail.adminAddresses =
+
+# List of email addresses for sending push email notifications.
+#
+# This key currently requires use of the sendemail.groovy hook script.
+# If you set sendemail.groovy in *groovy.postReceiveScripts* then email
+# notifications for all repositories (regardless of access restrictions!)
+# will be sent to these addresses.
+#
+# SPACE-DELIMITED
+# SINCE 0.8.0
+mail.mailingLists =
+
+#
+# Federation Settings
+# SINCE 0.6.0
+#
+# A Gitblit federation is a way to backup one Gitblit instance to another.
+#
+# *git.enableGitServlet* must be true to use this feature.
+
+# Your federation name is used for federation status acknowledgments. If it is
+# unset, and you elect to send a status acknowledgment, your Gitblit instance
+# will be identified by its hostname, if available, else your internal ip address.
+# The source Gitblit instance will also append your external IP address to your
+# identification to differentiate multiple pulling systems behind a single proxy.
+#
+# SINCE 0.6.0
+federation.name =
+
+# Specify the passphrase of this Gitblit instance.
+#
+# An unspecified (empty) passphrase disables processing federation requests.
+#
+# This value can be anything you want: an integer, a sentence, an haiku, etc.
+# Keep the value simple, though, to avoid Java properties file encoding issues.
+#
+# Changing your passphrase will break any registrations you have established with other
+# Gitblit instances.
+#
+# CASE-SENSITIVE
+# SINCE 0.6.0
+# RESTART REQUIRED *(only to enable or disable federation)*
+federation.passphrase =
+
+# Control whether or not this Gitblit instance can receive federation proposals
+# from another Gitblit instance. Registering a federated Gitblit is a manual
+# process. Proposals help to simplify that process by allowing a remote Gitblit
+# instance to send your Gitblit instance the federation pull data.
+#
+# SINCE 0.6.0
+federation.allowProposals = false
+
+# The destination folder for cached federation proposals.
+# Use forward slashes even on Windows!!
+#
+# SINCE 0.6.0
+federation.proposalsFolder = proposals
+
+# The default pull frequency if frequency is unspecified on a registration
+#
+# SINCE 0.6.0
+federation.defaultFrequency = 60 mins
+
- # Federation Sets are named groups of repositories. The Federation Sets are
++# Federation Sets are named groups of repositories. The Federation Sets are
+# available for selection in the repository settings page. You can assign a
+# repository to one or more sets and then distribute the token for the set.
+# This allows you to grant federation pull access to a subset of your available
+# repositories. Tokens for federation sets only grant repository pull access.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.6.0
- federation.sets =
++federation.sets =
+
+# Federation pull registrations
+# Registrations are read once, at startup.
+#
+# RESTART REQUIRED
+#
+# frequency:
+# The shortest frequency allowed is every 5 minutes
+# Decimal frequency values are cast to integers
+# Frequency values may be specified in mins, hours, or days
+# Values that can not be parsed or are unspecified default to *federation.defaultFrequency*
+#
+# folder:
+# if unspecified, the folder is *git.repositoriesFolder*
+# if specified, the folder is relative to *git.repositoriesFolder*
+#
+# bare:
+# if true, each repository will be created as a *bare* repository and will not
+# have a working directory.
+#
+# if false, each repository will be created as a normal repository suitable
+# for local work.
+#
+# mirror:
+# if true, each repository HEAD is reset to *origin/master* after each pull.
+# The repository will be flagged *isFrozen* after the initial clone.
+#
+# if false, each repository HEAD will point to the FETCH_HEAD of the initial
+# clone from the origin until pushed to or otherwise manipulated.
+#
+# mergeAccounts:
- # if true, remote accounts and their permissions are merged into your
- # users.properties file
++# if true, remote accounts and their permissions are merged into your
++# users.properties file
+#
+# notifyOnError:
+# if true and the mail configuration is properly set, administrators will be
+# notified by email of pull failures
+#
+# include and exclude:
+# Space-delimited list of repositories to include or exclude from pull
+# may be * wildcard to include or exclude all
+# may use fuzzy match (e.g. org.eclipse.*)
+
+#
+# (Nearly) Perfect Mirror example
+#
+
+#federation.example1.url = https://go.gitblit.com
+#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4
+#federation.example1.frequency = 120 mins
+#federation.example1.folder =
- #federation.example1.bare = true
- #federation.example1.mirror = true
++#federation.example1.bare = true
++#federation.example1.mirror = true
+#federation.example1.mergeAccounts = true
+
+#
+# Advanced Realm Settings
+#
+
+# URL of the LDAP server.
+# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to
+# send StartTLS command.
+#
+# SINCE 1.0.0
+realm.ldap.server = ldap://localhost
+
+# Login username for LDAP searches.
+# If this value is unspecified, anonymous LDAP login will be used.
- #
++#
+# e.g. mydomain\\username
+#
+# SINCE 1.0.0
+realm.ldap.username = cn=Directory Manager
+
+# Login password for LDAP searches.
+#
+# SINCE 1.0.0
+realm.ldap.password = password
+
+# The LdapUserService must be backed by another user service for standard user
+# and team management.
+# default: users.conf
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+realm.ldap.backingUserService = users.conf
+
+# Delegate team membership control to LDAP.
+#
+# If true, team user memberships will be specified by LDAP groups. This will
+# disable team selection in Edit User and user selection in Edit Team.
+#
+# If false, LDAP will only be used for authentication and Gitblit will maintain
+# team memberships with the *realm.ldap.backingUserService*.
+#
+# SINCE 1.0.0
+realm.ldap.maintainTeams = false
+
+# Root node for all LDAP users
+#
+# This is the root node from which subtree user searches will begin.
+# If blank, Gitblit will search ALL nodes.
+#
+# SINCE 1.0.0
+realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP users
+#
- # Query pattern to use when searching for a user account. This may be any valid
++# Query pattern to use when searching for a user account. This may be any valid
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+# ${username} - The text entered as the user name
+#
+# SINCE 1.0.0
+realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))
+
+# Root node for all LDAP groups to be used as Gitblit Teams
+#
+# This is the root node from which subtree team searches will begin.
- # If blank, Gitblit will search ALL nodes.
++# If blank, Gitblit will search ALL nodes.
+#
+# SINCE 1.0.0
+realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP groups
+#
- # Query pattern to use when searching for a team. This may be any valid
++# Query pattern to use when searching for a team. This may be any valid
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+# ${username} - The text entered as the user name
+# ${dn} - The Distinguished Name of the user logged in
+#
+# All attributes from the LDAP User record are available. For example, if a user
- # has an attribute "fullName" set to "John", "(fn=${fullName})" will be
++# has an attribute "fullName" set to "John", "(fn=${fullName})" will be
+# translated to "(fn=John)".
+#
+# SINCE 1.0.0
+realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))
+
+# LDAP users or groups that should be given administrator privileges.
+#
+# Teams are specified with a leading '@' character. Groups with spaces in the
+# name can be entered as "@team name".
+#
+# e.g. realm.ldap.admins = john @git_admins "@git admins"
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+realm.ldap.admins = @Git_Admins
+
+# Attribute(s) on the USER record that indicate their display (or full) name.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes. Examples:
+# displayName - Uses the attribute 'displayName' on the user record
- # ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3
++# ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3
+# attributes together, with a '.' after personalTitle
+#
+# SINCE 1.0.0
+realm.ldap.displayName = displayName
+
+# Attribute(s) on the USER record that indicate their email address.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes. Examples:
+# email - Uses the attribute 'email' on the user record
+# ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes
- # together with a '.' and '@' creating something like first.last@gitblit.com
++# together with a '.' and '@' creating something like first.last@gitblit.com
+#
+# SINCE 1.0.0
+realm.ldap.email = email
+
+# Defines whether to synchronize all LDAP users into the backing user service
+#
+# Valid values: true, false
+# If left blank, false is assumed
+realm.ldap.synchronizeUsers.enable = false
+
+# Defines whether to delete non-existent LDAP users from the backing user service
+# during synchronization. depends on realm.ldap.synchronizeUsers.enable = true
+#
+# Valid values: true, false
+# If left blank, true is assumed
+realm.ldap.synchronizeUsers.removeDeleted = true
+
+# Attribute on the USER record that indicate their username to be used in gitblit
+# when synchronizing users from LDAP
+# if blank, Gitblit will use uid
+#
+#
+realm.ldap.uid = uid
+
+# The RedmineUserService must be backed by another user service for standard user
+# and team management.
+# default: users.conf
+#
+# RESTART REQUIRED
+realm.redmine.backingUserService = users.conf
+
+# URL of the Redmine.
+realm.redmine.url = http://example.com/redmine
+
+#
+# Server Settings
+#
+
- # The temporary folder to decompress the embedded gitblit webapp.
++# The temporary folder to decompress the embedded gitblit webapp.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.tempFolder = temp
+
+# Use Jetty NIO connectors. If false, Jetty Socket connectors will be used.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.useNio = true
+
+# Context path for the GO application. You might want to change the context
+# path if running Gitblit behind a proxy layer such as mod_proxy.
+#
+# SINCE 0.7.0
+# RESTART REQUIRED
+server.contextPath = /
+
+# Standard http port to serve. <= 0 disables this connector.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 80 or 8080
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpPort = 0
+
+# Secure/SSL https port to serve. <= 0 disables this connector.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 443 or 8443
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpsPort = 8443
+
+# Port for serving an Apache JServ Protocol (AJP) 1.3 connector for integrating
+# Gitblit GO into an Apache HTTP server setup. <= 0 disables this connector.
+# Recommended value: 8009
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+server.ajpPort = 0
+
+# Specify the interface for Jetty to bind the standard connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpBindInterface = localhost
+
+# Specify the interface for Jetty to bind the secure connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpsBindInterface = localhost
+
+# Specify the interface for Jetty to bind the AJP connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+server.ajpBindInterface = localhost
+
+# Password for SSL keystore.
+# Keystore password and certificate password must match.
+# This is provided for convenience, its probably more secure to set this value
+# using the --storePassword command line parameter.
+#
+# If you are using the official JRE or JDK from Oracle you may not have the
+# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM. Because
+# of this, your store/key password can not exceed 7 characters. If you require
+# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction
+# Policy files from Oracle.
+#
+# http://www.oracle.com/technetwork/java/javase/downloads/index.html
+#
+# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited
+# Strength encryption is available.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.storePassword = gitblit
+
+# If serving over https (recommended) you might consider requiring clients to
+# authenticate with ssl certificates. If enabled, only https clients with the
+# a valid client certificate will be able to access Gitblit.
+#
+# If disabled, client certificate authentication is optional and will be tried
+# first before falling-back to form authentication or basic authentication.
+#
+# Requiring client certificates to access any of Gitblit may be too extreme,
+# consider this carefully.
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.requireClientCertificates = false
+
+# Port for shutdown monitor to listen on.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.shutdownPort = 8081
projects / gitblit.git / commitdiff