"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Разрешаване на автоматично довършване на име на потребител при въвеждане на пълното име или имейл адрес (като игнорирате липсващото съвпадение в телефонния указател и сте в същата група)",
"Change privacy level of full name" : "Промяна на нивото на поверителност на пълното име",
"No display name set" : "Няма настроено екранно име",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Максималният брой OPcache ключове почти е надвишен. За да се гарантира, че всички скриптове могат да се задържат в кеш, се препоръчва да се приложи <code>opcache.max_accelerated_files</code> към вашата PHP конфигурация със стойност, по-висока от <code>%s</code>.",
- "Match username when restricting to full match" : "Подбор на име на потребител при прилагане на ограничаване до пълно съвпадение",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Игнорирайте второто показвано име в скоби, ако има такова (пример: „Първото показвано име (второ игнорирано показвано име)“)"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Максималният брой OPcache ключове почти е надвишен. За да се гарантира, че всички скриптове могат да се задържат в кеш, се препоръчва да се приложи <code>opcache.max_accelerated_files</code> към вашата PHP конфигурация със стойност, по-висока от <code>%s</code>."
},
"nplurals=2; plural=(n != 1);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Разрешаване на автоматично довършване на име на потребител при въвеждане на пълното име или имейл адрес (като игнорирате липсващото съвпадение в телефонния указател и сте в същата група)",
"Change privacy level of full name" : "Промяна на нивото на поверителност на пълното име",
"No display name set" : "Няма настроено екранно име",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Максималният брой OPcache ключове почти е надвишен. За да се гарантира, че всички скриптове могат да се задържат в кеш, се препоръчва да се приложи <code>opcache.max_accelerated_files</code> към вашата PHP конфигурация със стойност, по-висока от <code>%s</code>.",
- "Match username when restricting to full match" : "Подбор на име на потребител при прилагане на ограничаване до пълно съвпадение",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Игнорирайте второто показвано име в скоби, ако има такова (пример: „Първото показвано име (второ игнорирано показвано име)“)"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Максималният брой OPcache ключове почти е надвишен. За да се гарантира, че всички скриптове могат да се задържат в кеш, се препоръчва да се приложи <code>opcache.max_accelerated_files</code> към вашата PHP конфигурация със стойност, по-висока от <code>%s</code>."
},"pluralForm" :"nplurals=2; plural=(n != 1);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Povolit automatické dokončování uživatelského jména při zadávání celého jména nebo e-mailové adresy (při ignorování chybějící shody s telefonním seznamem a toho, že je ve stejné skupině)",
"Change privacy level of full name" : "Změnit úroveň soukromí pro celé jméno",
"No display name set" : "Nenastaveno žádné zobrazované jméno",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Je téměř vyčerpán nejvyšší umožněný počet klíčů v OPcache. Aby bylo zajištěno, že se do mezipaměti vejdou veškeré skripty, je doporučeno přidat do nastavení PHP volbu <code>opcache.max_accelerated_files</code> s hodnotou vyšší než <code>%s</code>.",
- "Match username when restricting to full match" : "Při omezení na úplnou shodu hledat tuto uživatelském jménu",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Ignorovat druhé zobrazované jméno v závorkách (pokud zde je). Příklad: „První zobrazované jméno (druhé – ignorované – zobrazované jméno)“"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Je téměř vyčerpán nejvyšší umožněný počet klíčů v OPcache. Aby bylo zajištěno, že se do mezipaměti vejdou veškeré skripty, je doporučeno přidat do nastavení PHP volbu <code>opcache.max_accelerated_files</code> s hodnotou vyšší než <code>%s</code>."
},
"nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Povolit automatické dokončování uživatelského jména při zadávání celého jména nebo e-mailové adresy (při ignorování chybějící shody s telefonním seznamem a toho, že je ve stejné skupině)",
"Change privacy level of full name" : "Změnit úroveň soukromí pro celé jméno",
"No display name set" : "Nenastaveno žádné zobrazované jméno",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Je téměř vyčerpán nejvyšší umožněný počet klíčů v OPcache. Aby bylo zajištěno, že se do mezipaměti vejdou veškeré skripty, je doporučeno přidat do nastavení PHP volbu <code>opcache.max_accelerated_files</code> s hodnotou vyšší než <code>%s</code>.",
- "Match username when restricting to full match" : "Při omezení na úplnou shodu hledat tuto uživatelském jménu",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Ignorovat druhé zobrazované jméno v závorkách (pokud zde je). Příklad: „První zobrazované jméno (druhé – ignorované – zobrazované jméno)“"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Je téměř vyčerpán nejvyšší umožněný počet klíčů v OPcache. Aby bylo zajištěno, že se do mezipaměti vejdou veškeré skripty, je doporučeno přidat do nastavení PHP volbu <code>opcache.max_accelerated_files</code> s hodnotou vyšší než <code>%s</code>."
},"pluralForm" :"nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Ermöglicht die automatische Vervollständigung des Benutzernamens, wenn der vollständigen Namen oder die E-Mail-Adresse eingeben wird (ignoriert fehlende Telefonbuchübereinstimmungen und bei gleicher Gruppenzugehörigkeit). ",
"Change privacy level of full name" : "Datenschutzstufe des vollständigen Namens ändern",
"No display name set" : "Kein Anzeigename angegeben",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden.",
- "Match username when restricting to full match" : "Übereinstimmung mit dem Benutzernamen bei Einschränkung auf vollständige Übereinstimmung",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Den zweiten Anzeigenamen in Klammern ignorieren, falls vorhanden (Beispiel: \"Erster Anzeigename (zweiter ignorierter Anzeigename)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden."
},
"nplurals=2; plural=(n != 1);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Ermöglicht die automatische Vervollständigung des Benutzernamens, wenn der vollständigen Namen oder die E-Mail-Adresse eingeben wird (ignoriert fehlende Telefonbuchübereinstimmungen und bei gleicher Gruppenzugehörigkeit). ",
"Change privacy level of full name" : "Datenschutzstufe des vollständigen Namens ändern",
"No display name set" : "Kein Anzeigename angegeben",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden.",
- "Match username when restricting to full match" : "Übereinstimmung mit dem Benutzernamen bei Einschränkung auf vollständige Übereinstimmung",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Den zweiten Anzeigenamen in Klammern ignorieren, falls vorhanden (Beispiel: \"Erster Anzeigename (zweiter ignorierter Anzeigename)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden."
},"pluralForm" :"nplurals=2; plural=(n != 1);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Ermöglicht die automatische Vervollständigung des Benutzernamens, wenn der vollständigen Namen oder die E-Mail-Adresse eingeben wird (ignoriert fehlende Telefonbuchübereinstimmungen und gleiche Gruppenzugehörigkeiten).",
"Change privacy level of full name" : "Datenschutzstufe des vollen Namens ändern",
"No display name set" : "Kein Anzeigename angegeben",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> auf Ihre PHP-Konfiguration anzuwenden.",
- "Match username when restricting to full match" : "Übereinstimmung mit dem Benutzernamen bei Einschränkung auf vollständige Übereinstimmung",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Den zweiten Anzeigenamen in Klammern ignorieren, falls vorhanden (Beispiel: \"Erster Anzeigename (zweiter ignorierter Anzeigename)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> auf Ihre PHP-Konfiguration anzuwenden."
},
"nplurals=2; plural=(n != 1);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Ermöglicht die automatische Vervollständigung des Benutzernamens, wenn der vollständigen Namen oder die E-Mail-Adresse eingeben wird (ignoriert fehlende Telefonbuchübereinstimmungen und gleiche Gruppenzugehörigkeiten).",
"Change privacy level of full name" : "Datenschutzstufe des vollen Namens ändern",
"No display name set" : "Kein Anzeigename angegeben",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> auf Ihre PHP-Konfiguration anzuwenden.",
- "Match username when restricting to full match" : "Übereinstimmung mit dem Benutzernamen bei Einschränkung auf vollständige Übereinstimmung",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Den zweiten Anzeigenamen in Klammern ignorieren, falls vorhanden (Beispiel: \"Erster Anzeigename (zweiter ignorierter Anzeigename)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast überschritten. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> auf Ihre PHP-Konfiguration anzuwenden."
},"pluralForm" :"nplurals=2; plural=(n != 1);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "A felhasználónév automatikus kiegészítésének negedélyezése a teljes név vagy e-mail-cím megadásakor (figyelmen kívül hagyva a hiányzó telefonkönyves egyezést és az ugyanabba a csoportba tartozást)",
"Change privacy level of full name" : "A teljes név adatvédelmi szintjének módosítása",
"No display name set" : "Nincs megjelenítési név beállítva",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Majdnem túllépte az OPcache kulcsok legnagyobb számát. Hogy biztosítsa, hogy az összes parancsfájl tárolható legyen a gyorsítótárban, ajánlatos, hogy a(z) <code>%s</code> értéknél nagyobbra állítsa az <code>opcache.max_accelerated_files</code> beállítást a PHP konfigurációjában.",
- "Match username when restricting to full match" : "Keresés a felhasználónévre, ha pontos egyezésre van korlátozva",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "A zárójelben lévő második megjelenítendő név mellőzése, ha van ilyen (például: „Első megjelenítendő név (második megjelenítendő név)”)"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Majdnem túllépte az OPcache kulcsok legnagyobb számát. Hogy biztosítsa, hogy az összes parancsfájl tárolható legyen a gyorsítótárban, ajánlatos, hogy a(z) <code>%s</code> értéknél nagyobbra állítsa az <code>opcache.max_accelerated_files</code> beállítást a PHP konfigurációjában."
},
"nplurals=2; plural=(n != 1);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "A felhasználónév automatikus kiegészítésének negedélyezése a teljes név vagy e-mail-cím megadásakor (figyelmen kívül hagyva a hiányzó telefonkönyves egyezést és az ugyanabba a csoportba tartozást)",
"Change privacy level of full name" : "A teljes név adatvédelmi szintjének módosítása",
"No display name set" : "Nincs megjelenítési név beállítva",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Majdnem túllépte az OPcache kulcsok legnagyobb számát. Hogy biztosítsa, hogy az összes parancsfájl tárolható legyen a gyorsítótárban, ajánlatos, hogy a(z) <code>%s</code> értéknél nagyobbra állítsa az <code>opcache.max_accelerated_files</code> beállítást a PHP konfigurációjában.",
- "Match username when restricting to full match" : "Keresés a felhasználónévre, ha pontos egyezésre van korlátozva",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "A zárójelben lévő második megjelenítendő név mellőzése, ha van ilyen (például: „Első megjelenítendő név (második megjelenítendő név)”)"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Majdnem túllépte az OPcache kulcsok legnagyobb számát. Hogy biztosítsa, hogy az összes parancsfájl tárolható legyen a gyorsítótárban, ajánlatos, hogy a(z) <code>%s</code> értéknél nagyobbra állítsa az <code>opcache.max_accelerated_files</code> beállítást a PHP konfigurációjában."
},"pluralForm" :"nplurals=2; plural=(n != 1);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Zezwalaj na automatyczne uzupełnianie nazwy użytkownika podczas wpisywania imienia i nazwiska lub adresu e-mail (ignorowanie brakującego dopasowania w książce telefonicznej i przynależności do tej samej grupy)",
"Change privacy level of full name" : "Zmień poziom prywatności pełnej nazwy",
"No display name set" : "Brak wyświetlanej nazwy",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Maksymalna liczba kluczy OPcache jest prawie przekroczona. Aby upewnić się, że wszystkie skrypty mogą być przechowywane w pamięci podręcznej, zaleca się zastosowanie <code>opcache.max_accelerated_files</code> w konfiguracji PHP z wartością wyższą niż <code>%s</code>.",
- "Match username when restricting to full match" : "Dopasuj nazwę użytkownika przy ograniczeniu do pełnego dopasowania",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Ignoruj drugą wyświetlaną nazwę w nawiasach, jeśli taka istnieje, (przykład: \"Pierwsza wyświetlana nazwa (druga ignorowana wyświetlana nazwa)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Maksymalna liczba kluczy OPcache jest prawie przekroczona. Aby upewnić się, że wszystkie skrypty mogą być przechowywane w pamięci podręcznej, zaleca się zastosowanie <code>opcache.max_accelerated_files</code> w konfiguracji PHP z wartością wyższą niż <code>%s</code>."
},
"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Zezwalaj na automatyczne uzupełnianie nazwy użytkownika podczas wpisywania imienia i nazwiska lub adresu e-mail (ignorowanie brakującego dopasowania w książce telefonicznej i przynależności do tej samej grupy)",
"Change privacy level of full name" : "Zmień poziom prywatności pełnej nazwy",
"No display name set" : "Brak wyświetlanej nazwy",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Maksymalna liczba kluczy OPcache jest prawie przekroczona. Aby upewnić się, że wszystkie skrypty mogą być przechowywane w pamięci podręcznej, zaleca się zastosowanie <code>opcache.max_accelerated_files</code> w konfiguracji PHP z wartością wyższą niż <code>%s</code>.",
- "Match username when restricting to full match" : "Dopasuj nazwę użytkownika przy ograniczeniu do pełnego dopasowania",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Ignoruj drugą wyświetlaną nazwę w nawiasach, jeśli taka istnieje, (przykład: \"Pierwsza wyświetlana nazwa (druga ignorowana wyświetlana nazwa)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Maksymalna liczba kluczy OPcache jest prawie przekroczona. Aby upewnić się, że wszystkie skrypty mogą być przechowywane w pamięci podręcznej, zaleca się zastosowanie <code>opcache.max_accelerated_files</code> w konfiguracji PHP z wartością wyższą niż <code>%s</code>."
},"pluralForm" :"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Permitir a autocompletar o nome de usuário ao inserir o nome completo ou endereço de e-mail (ignorando se está na lista de telefones ou no mesmo grupo)",
"Change privacy level of full name" : "Alterar o nível de privacidade do nome completo ",
"No display name set" : "Nenhum nome de exibição definido",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "O número máximo de chaves do OPcache é quase excedido. Para garantir que todos os scripts possam ser mantidos em cache, é recomendável aplicar <code>opcache.max_accelerated_files</code>para sua configuração PHP com um valor maior que <code>%s</code>.",
- "Match username when restricting to full match" : "Corresponder ao nome de usuário ao restringir a correspondência completa",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Ignore o segundo nome de exibição entre parênteses, se houver (exemplo: \"Primeiro nome de exibição (segundo nome de exibição ignorado)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "O número máximo de chaves do OPcache é quase excedido. Para garantir que todos os scripts possam ser mantidos em cache, é recomendável aplicar <code>opcache.max_accelerated_files</code>para sua configuração PHP com um valor maior que <code>%s</code>."
},
"nplurals=2; plural=(n > 1);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Permitir a autocompletar o nome de usuário ao inserir o nome completo ou endereço de e-mail (ignorando se está na lista de telefones ou no mesmo grupo)",
"Change privacy level of full name" : "Alterar o nível de privacidade do nome completo ",
"No display name set" : "Nenhum nome de exibição definido",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "O número máximo de chaves do OPcache é quase excedido. Para garantir que todos os scripts possam ser mantidos em cache, é recomendável aplicar <code>opcache.max_accelerated_files</code>para sua configuração PHP com um valor maior que <code>%s</code>.",
- "Match username when restricting to full match" : "Corresponder ao nome de usuário ao restringir a correspondência completa",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Ignore o segundo nome de exibição entre parênteses, se houver (exemplo: \"Primeiro nome de exibição (segundo nome de exibição ignorado)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "O número máximo de chaves do OPcache é quase excedido. Para garantir que todos os scripts possam ser mantidos em cache, é recomendável aplicar <code>opcache.max_accelerated_files</code>para sua configuração PHP com um valor maior que <code>%s</code>."
},"pluralForm" :"nplurals=2; plural=(n > 1);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Tam ad ya da e-posta adresi yazılırken kullanıcı adı otomatik olarak tamamlanabilsin (aynı grupta olma ya da telefon defteri eşleşmesi yok sayılarak)",
"Change privacy level of full name" : "Tam adın gizlilik düzeyini değiştir",
"No display name set" : "Görüntülenecek ad belirtilmemiş",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "En fazla OPcache anahtar sayısına neredeyse erişildi. Tüm betik dosyalarının ön bellekte tutulabilmesini sağlamak için, PHP yapılandırmanıza <code>%s</code> üzerinde bir değerle <code>opcache.max_accelerated_files</code> uygulamanız önerilir.",
- "Match username when restricting to full match" : "Tam eşleşme kısıtlamasında kullanıcı adı ile eşleşilsin",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Varsa, parantez içindeki görüntülecek ikinci ad yok sayılsın (örneğin \"Görüntülenecek ilk ad (yok sayılacak görüntülenecek ikinci ad)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "En fazla OPcache anahtar sayısına neredeyse erişildi. Tüm betik dosyalarının ön bellekte tutulabilmesini sağlamak için, PHP yapılandırmanıza <code>%s</code> üzerinde bir değerle <code>opcache.max_accelerated_files</code> uygulamanız önerilir."
},
"nplurals=2; plural=(n > 1);");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "Tam ad ya da e-posta adresi yazılırken kullanıcı adı otomatik olarak tamamlanabilsin (aynı grupta olma ya da telefon defteri eşleşmesi yok sayılarak)",
"Change privacy level of full name" : "Tam adın gizlilik düzeyini değiştir",
"No display name set" : "Görüntülenecek ad belirtilmemiş",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "En fazla OPcache anahtar sayısına neredeyse erişildi. Tüm betik dosyalarının ön bellekte tutulabilmesini sağlamak için, PHP yapılandırmanıza <code>%s</code> üzerinde bir değerle <code>opcache.max_accelerated_files</code> uygulamanız önerilir.",
- "Match username when restricting to full match" : "Tam eşleşme kısıtlamasında kullanıcı adı ile eşleşilsin",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "Varsa, parantez içindeki görüntülecek ikinci ad yok sayılsın (örneğin \"Görüntülenecek ilk ad (yok sayılacak görüntülenecek ikinci ad)\")"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "En fazla OPcache anahtar sayısına neredeyse erişildi. Tüm betik dosyalarının ön bellekte tutulabilmesini sağlamak için, PHP yapılandırmanıza <code>%s</code> üzerinde bir değerle <code>opcache.max_accelerated_files</code> uygulamanız önerilir."
},"pluralForm" :"nplurals=2; plural=(n > 1);"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "輸入全名或電郵地址時，允許用戶名自動完成（忽略缺少的電話簿匹配項，並且位於同一群組中）",
"Change privacy level of full name" : "更改全名的私隱級別",
"No display name set" : "未設定顯示名稱",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了可用的 OPcache 密鑰的最大數量。為確保所有腳本都可以保存在緩存中，建議將 <code>opcache.max_accelerated_files</code> 應用於您的 PHP 配置，其值高於 <code>%s</code>。",
- "Match username when restricting to full match" : "限制為完全匹配時匹配用戶名",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "忽略括號中的第二個顯示名稱（如有）。示例：“第一個顯示名稱（第二個忽略的顯示名稱）”"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了可用的 OPcache 密鑰的最大數量。為確保所有腳本都可以保存在緩存中，建議將 <code>opcache.max_accelerated_files</code> 應用於您的 PHP 配置，其值高於 <code>%s</code>。"
},
"nplurals=1; plural=0;");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "輸入全名或電郵地址時，允許用戶名自動完成（忽略缺少的電話簿匹配項，並且位於同一群組中）",
"Change privacy level of full name" : "更改全名的私隱級別",
"No display name set" : "未設定顯示名稱",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了可用的 OPcache 密鑰的最大數量。為確保所有腳本都可以保存在緩存中，建議將 <code>opcache.max_accelerated_files</code> 應用於您的 PHP 配置，其值高於 <code>%s</code>。",
- "Match username when restricting to full match" : "限制為完全匹配時匹配用戶名",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "忽略括號中的第二個顯示名稱（如有）。示例：“第一個顯示名稱（第二個忽略的顯示名稱）”"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了可用的 OPcache 密鑰的最大數量。為確保所有腳本都可以保存在緩存中，建議將 <code>opcache.max_accelerated_files</code> 應用於您的 PHP 配置，其值高於 <code>%s</code>。"
},"pluralForm" :"nplurals=1; plural=0;"
}
\ No newline at end of file
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "輸入全名或電子郵件地址時，允許使用者名稱自動完成（忽略缺少的通訊錄相符，以及在同一個群組中的）",
"Change privacy level of full name" : "變更全名的隱私等級",
"No display name set" : "未設定顯示名稱",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了 OPcache 鍵的最大數量。為確保幾乎所有指令稿都可以保留在快取中，建議在您的 PHP 設定中的 <code>opcache.max_accelerated_files</code> 套用高於 <code>%s</code> 的值。",
- "Match username when restricting to full match" : "限制為完全符合時符合使用者名稱",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "忽略括號中的第二顯示名稱（若有）。範例：「第一個顯示名稱（第二個忽略的顯示名稱）」"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了 OPcache 鍵的最大數量。為確保幾乎所有指令稿都可以保留在快取中，建議在您的 PHP 設定中的 <code>opcache.max_accelerated_files</code> 套用高於 <code>%s</code> 的值。"
},
"nplurals=1; plural=0;");
"Allow username autocompletion when entering the full name or email address (ignoring missing phonebook match and being in the same group)" : "輸入全名或電子郵件地址時，允許使用者名稱自動完成（忽略缺少的通訊錄相符，以及在同一個群組中的）",
"Change privacy level of full name" : "變更全名的隱私等級",
"No display name set" : "未設定顯示名稱",
- "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了 OPcache 鍵的最大數量。為確保幾乎所有指令稿都可以保留在快取中，建議在您的 PHP 設定中的 <code>opcache.max_accelerated_files</code> 套用高於 <code>%s</code> 的值。",
- "Match username when restricting to full match" : "限制為完全符合時符合使用者名稱",
- "Ignore second display name in parentheses if any (example: \"First display name (second ignored display name)\")" : "忽略括號中的第二顯示名稱（若有）。範例：「第一個顯示名稱（第二個忽略的顯示名稱）」"
+ "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "幾乎超過了 OPcache 鍵的最大數量。為確保幾乎所有指令稿都可以保留在快取中，建議在您的 PHP 設定中的 <code>opcache.max_accelerated_files</code> 套用高於 <code>%s</code> 的值。"
},"pluralForm" :"nplurals=1; plural=0;"
}
\ No newline at end of file
"\"$home\" Placeholder Field" : "Výplňová kolonka „$home“",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home bude v nastavení externího úložiště nahrazeno hodnotou zadaného atributu",
"Internal Username" : "Interní uživatelské jméno",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Ve výchozím nastavení bude interní uživatelské jméno vytvořeno z atributu UUID. To zajišťuje, že je uživatelské jméno unikátní a znaky nemusí být převáděny. Interní uživatelské jméno má omezení, podle kterého jsou povoleny jen následující znaky [ a-zA-Z0-9_.@- ]. Ostatní znaky jsou nahrazeny jejich protějšky z ASCII nebo prostě vynechány. Při konfliktech bude přidáno/zvýšeno číslo. Interní uživatelské jméno slouží pro interní identifikaci uživatele. Je také výchozím názvem domovského adresáře uživatele. Je také součástí URL, např. pro služby *DAV. Tímto nastavením může být výchozí chování změněno. Změny se projeví pouze u nově namapovaných (přidaných) uživatelů LDAP. Ponechte ho prázdné, pokud chcete zachovat výchozí nastavení. ",
"Internal Username Attribute:" : "Atribut interního uživatelského jména:",
"Override UUID detection" : "Nastavit ručně UUID atribut",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Ve výchozím nastavení je UUID atribut nalezen automaticky. UUID atribut je používán pro nezpochybnitelnou identifikaci uživatelů a skupin z LDAP. Navíc je na základě UUID tvořeno také interní uživatelské jméno, pokud není nastaveno jinak. Můžete výchozí nastavení přepsat a použít atribut, který sami zvolíte. Musíte se ale ujistit, že atribut, který vyberete, bude uveden jak u uživatelů, tak i u skupin a je unikátní. Ponechte prázdné pro výchozí chování. Změna bude mít vliv jen na nově namapované (přidané) uživatele a skupiny z LDAP.",
"\"$home\" Placeholder Field" : "Výplňová kolonka „$home“",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home bude v nastavení externího úložiště nahrazeno hodnotou zadaného atributu",
"Internal Username" : "Interní uživatelské jméno",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Ve výchozím nastavení bude interní uživatelské jméno vytvořeno z atributu UUID. To zajišťuje, že je uživatelské jméno unikátní a znaky nemusí být převáděny. Interní uživatelské jméno má omezení, podle kterého jsou povoleny jen následující znaky [ a-zA-Z0-9_.@- ]. Ostatní znaky jsou nahrazeny jejich protějšky z ASCII nebo prostě vynechány. Při konfliktech bude přidáno/zvýšeno číslo. Interní uživatelské jméno slouží pro interní identifikaci uživatele. Je také výchozím názvem domovského adresáře uživatele. Je také součástí URL, např. pro služby *DAV. Tímto nastavením může být výchozí chování změněno. Změny se projeví pouze u nově namapovaných (přidaných) uživatelů LDAP. Ponechte ho prázdné, pokud chcete zachovat výchozí nastavení. ",
"Internal Username Attribute:" : "Atribut interního uživatelského jména:",
"Override UUID detection" : "Nastavit ručně UUID atribut",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Ve výchozím nastavení je UUID atribut nalezen automaticky. UUID atribut je používán pro nezpochybnitelnou identifikaci uživatelů a skupin z LDAP. Navíc je na základě UUID tvořeno také interní uživatelské jméno, pokud není nastaveno jinak. Můžete výchozí nastavení přepsat a použít atribut, který sami zvolíte. Musíte se ale ujistit, že atribut, který vyberete, bude uveden jak u uživatelů, tak i u skupin a je unikátní. Ponechte prázdné pro výchozí chování. Změna bude mít vliv jen na nově namapované (přidané) uživatele a skupiny z LDAP.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Standardmäßig wird der interne Benutzername aus dem UUID-Attribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [a-zA-Z0-9_.@-]. Andere Zeichen werden durch ihre ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwendet, um den Benutzer intern zu identifizieren. Er ist außerdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Beispiel für alle *DAV-Dienste. Mit dieser Einstellung kann das Standardverhalten geändert werden. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus. Für die Standardeinstellung lassen Sie das Eingabefeld leer.",
"Internal Username Attribute:" : "Interne Eigenschaften des Benutzers:",
"Override UUID detection" : "UUID-Erkennung überschreiben",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Standardmäßig wird die UUID-Eigenschaft automatisch erkannt. Die UUID-Eigenschaft wird genutzt, um einen LDAP-Benutzer und Gruppen einwandfrei zu identifizieren. Außerdem wird der interne Benutzername erzeugt, der auf Eigenschaften der UUID basiert, wenn es oben nicht anders angegeben wurde. Sie müssen allerdings sicherstellen, dass Ihre gewählten Eigenschaften zur Identifikation der Benutzer und Gruppen eindeutig sind und zugeordnet werden können. Lassen Sie es frei, um es beim Standardverhalten zu belassen. Änderungen wirken sich nur auf neu gemappte (hinzugefügte) LDAP-Benutzer und -Gruppen aus.",
"\"$home\" Placeholder Field" : "\"$home\" Platzhalter-Feld",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home in der Konfiguration eines extern angeschlossenen Speichers wird mit dem Wert des angegebenen Attributs ersetzt",
"Internal Username" : "Interner Benutzername",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Standardmäßig wird der interne Benutzername aus dem UUID-Attribut erstellt. So wird sichergestellt, dass der Benutzername einmalig ist und Zeichen nicht konvertiert werden müssen. Für den internen Benutzernamen sind nur folgende Zeichen zulässig: [a-zA-Z0-9_.@-]. Andere Zeichen werden durch ihre ASCII-Entsprechung ersetzt oder einfach weggelassen. Bei Kollisionen wird eine Nummer hinzugefügt/erhöht. Der interne Benutzername wird verwendet, um den Benutzer intern zu identifizieren. Er ist außerdem der Standardname für den Stamm-Ordner des Benutzers. Darüber hinaus ist er Teil der URLs für den Zugriff, zum Beispiel für alle *DAV-Dienste. Mit dieser Einstellung kann das Standardverhalten geändert werden. Änderungen wirken sich nur auf neu eingetragene (hinzugefügte) LDAP-Benutzer aus. Für die Standardeinstellung lassen Sie das Eingabefeld leer.",
"Internal Username Attribute:" : "Interne Eigenschaften des Benutzers:",
"Override UUID detection" : "UUID-Erkennung überschreiben",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Standardmäßig wird die UUID-Eigenschaft automatisch erkannt. Die UUID-Eigenschaft wird genutzt, um einen LDAP-Benutzer und Gruppen einwandfrei zu identifizieren. Außerdem wird der interne Benutzername erzeugt, der auf Eigenschaften der UUID basiert, wenn es oben nicht anders angegeben wurde. Sie müssen allerdings sicherstellen, dass Ihre gewählten Eigenschaften zur Identifikation der Benutzer und Gruppen eindeutig sind und zugeordnet werden können. Lassen Sie es frei, um es beim Standardverhalten zu belassen. Änderungen wirken sich nur auf neu gemappte (hinzugefügte) LDAP-Benutzer und -Gruppen aus.",
"\"$home\" Placeholder Field" : "„$home” helykitöltő mező",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "Külső tárhely beállítása esetén a $home a megadott tulajdonság értékére lesz cserélve",
"Internal Username" : "Belső felhasználónév",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Alapértelmezetten egy belső felhasználónév jön létre a UUID attribútumból. Gondoskodik róla, hogy a felhasználónév egyedi legyen és ne kelljen a karaktereket konvertálni. A belső felhasználónév csak a következő karakterekből állhat: [a-zA-Z0-9_.@-]. Más karakterek az ASCII megfelelőikre lesznek cserélve, vagy csak simán ki lesznek hagyva. Ütközés esetén egy szám lesz hozzáadva, vagy növelve. A belső felhasználónév a felhasználó belső azonosítására szolgál. Egyben a felhasználó saját mappájának neveként is szolgál. Ez része a távoli URL-eknek, például az összes DAV szolgáltatásnál. Ezzel a beállítással az alapértelmezett működés felülírható. A változások csak újonnan hozzárendelt (hozzáadott) LDAP felhasználóknál kerül alkalmazásra. Hagyja üresen az alapértelmezett viselkedéshez.",
"Internal Username Attribute:" : "Belső felhasználónév attribútuma:",
"Override UUID detection" : "UUID-felismerés felülbírálása",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Az UUID attribútum alapértelmezetten felismerésre kerül. Az UUID attribútum segítségével az LDAP felhasználók és csoportok egyértelműen azonosíthatók. A belső felhasználónév is azonos lesz az UUID-vel, ha fentebb nincs másként definiálva. Ezt a beállítást felülbírálhatja és bármely attribútummal helyettesítheti. Ekkor azonban gondoskodnia kell arról, hogy a kiválasztott attribútum minden felhasználó és csoport esetén lekérdezhető legyen, és egyedi értékkel bírjon. Ha a mezőt üresen hagyja, akkor az alapértelmezett attribútum lesz érvényes. Egy esetleges módosítás csak az újonnan hozzárendelt (hozzáadott) felhasználókra és csoportokra lesz érvényes.",
"\"$home\" Placeholder Field" : "„$home” helykitöltő mező",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "Külső tárhely beállítása esetén a $home a megadott tulajdonság értékére lesz cserélve",
"Internal Username" : "Belső felhasználónév",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Alapértelmezetten egy belső felhasználónév jön létre a UUID attribútumból. Gondoskodik róla, hogy a felhasználónév egyedi legyen és ne kelljen a karaktereket konvertálni. A belső felhasználónév csak a következő karakterekből állhat: [a-zA-Z0-9_.@-]. Más karakterek az ASCII megfelelőikre lesznek cserélve, vagy csak simán ki lesznek hagyva. Ütközés esetén egy szám lesz hozzáadva, vagy növelve. A belső felhasználónév a felhasználó belső azonosítására szolgál. Egyben a felhasználó saját mappájának neveként is szolgál. Ez része a távoli URL-eknek, például az összes DAV szolgáltatásnál. Ezzel a beállítással az alapértelmezett működés felülírható. A változások csak újonnan hozzárendelt (hozzáadott) LDAP felhasználóknál kerül alkalmazásra. Hagyja üresen az alapértelmezett viselkedéshez.",
"Internal Username Attribute:" : "Belső felhasználónév attribútuma:",
"Override UUID detection" : "UUID-felismerés felülbírálása",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Az UUID attribútum alapértelmezetten felismerésre kerül. Az UUID attribútum segítségével az LDAP felhasználók és csoportok egyértelműen azonosíthatók. A belső felhasználónév is azonos lesz az UUID-vel, ha fentebb nincs másként definiálva. Ezt a beállítást felülbírálhatja és bármely attribútummal helyettesítheti. Ekkor azonban gondoskodnia kell arról, hogy a kiválasztott attribútum minden felhasználó és csoport esetén lekérdezhető legyen, és egyedi értékkel bírjon. Ha a mezőt üresen hagyja, akkor az alapértelmezett attribútum lesz érvényes. Egy esetleges módosítás csak az újonnan hozzárendelt (hozzáadott) felhasználókra és csoportokra lesz érvényes.",
"\"$home\" Placeholder Field" : "Pole zastępcze \"$home\"",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home w zewnętrznej konfiguracji pamięci zostanie zastąpiony wartością określonego atrybutu",
"Internal Username" : "Wewnętrzna nazwa użytkownika",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Domyślnie wewnętrzna nazwa użytkownika zostanie utworzona z atrybutu UUID. Zapewnia to unikalność nazwy użytkownika, a znaki nie muszą być konwertowane. Wewnętrzna nazwa użytkownika ma ograniczenie, dlatego dozwolone są tylko znaki: [a-zA-Z0-9_.@-]. Inne znaki są zastępowane przez ich odpowiedniki ASCII lub po prostu pomijane. W przypadku kolizji zostanie dodany/zwiększony numer. Wewnętrzna nazwa użytkownika służy do wewnętrznej identyfikacji użytkownika. Jest również domyślną nazwą katalogu domowego użytkownika oraz częścią zdalnych adresów URL, na przykład dla wszystkich usług *DAV. Dzięki temu ustawieniu można zastąpić domyślne zachowanie. Zmiany będą miały wpływ tylko na nowo zmapowanych (dodanych) użytkowników LDAP. Dla domyślnego zachowania pozostaw to puste.",
"Internal Username Attribute:" : "Wewnętrzny atrybut nazwy uzżytkownika:",
"Override UUID detection" : "Zastąp wykrywanie UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Domyślnie, atrybut UUID jest wykrywany automatycznie. Atrybut UUID jest używany do niepodważalnej identyfikacji użytkowników i grup LDAP. Również wewnętrzna nazwa użytkownika zostanie stworzona na bazie UUID, jeśli nie zostanie podana powyżej. Możesz nadpisać to ustawienie i użyć atrybutu wedle uznania. Musisz się jednak upewnić, że atrybut ten może zostać pobrany zarówno dla użytkowników, jak i grup i jest unikalny. Pozostaw puste dla domyślnego zachowania. Zmiany będą miały wpływ tylko na nowo przypisanych (dodanych) użytkowników i grupy LDAP.",
"\"$home\" Placeholder Field" : "Pole zastępcze \"$home\"",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home w zewnętrznej konfiguracji pamięci zostanie zastąpiony wartością określonego atrybutu",
"Internal Username" : "Wewnętrzna nazwa użytkownika",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Domyślnie wewnętrzna nazwa użytkownika zostanie utworzona z atrybutu UUID. Zapewnia to unikalność nazwy użytkownika, a znaki nie muszą być konwertowane. Wewnętrzna nazwa użytkownika ma ograniczenie, dlatego dozwolone są tylko znaki: [a-zA-Z0-9_.@-]. Inne znaki są zastępowane przez ich odpowiedniki ASCII lub po prostu pomijane. W przypadku kolizji zostanie dodany/zwiększony numer. Wewnętrzna nazwa użytkownika służy do wewnętrznej identyfikacji użytkownika. Jest również domyślną nazwą katalogu domowego użytkownika oraz częścią zdalnych adresów URL, na przykład dla wszystkich usług *DAV. Dzięki temu ustawieniu można zastąpić domyślne zachowanie. Zmiany będą miały wpływ tylko na nowo zmapowanych (dodanych) użytkowników LDAP. Dla domyślnego zachowania pozostaw to puste.",
"Internal Username Attribute:" : "Wewnętrzny atrybut nazwy uzżytkownika:",
"Override UUID detection" : "Zastąp wykrywanie UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Domyślnie, atrybut UUID jest wykrywany automatycznie. Atrybut UUID jest używany do niepodważalnej identyfikacji użytkowników i grup LDAP. Również wewnętrzna nazwa użytkownika zostanie stworzona na bazie UUID, jeśli nie zostanie podana powyżej. Możesz nadpisać to ustawienie i użyć atrybutu wedle uznania. Musisz się jednak upewnić, że atrybut ten może zostać pobrany zarówno dla użytkowników, jak i grup i jest unikalny. Pozostaw puste dla domyślnego zachowania. Zmiany będą miały wpływ tylko na nowo przypisanych (dodanych) użytkowników i grupy LDAP.",
"\"$home\" Placeholder Field" : "\"$home\" Yer Belirleyici Alanı",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "Bir dış depolama yapılandırmasında $home yerine belirtilen öznitelik konulur",
"Internal Username" : "İç kullanıcı adı",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Varsayılan olarak, iç kullanıcı adı UUID özniteliğinden oluşturulur. Böylece kullanıcı adının eşsiz olması ve dönüştürülmesi gereken karakterler içermediğinden emin olunur. İç kullanıcı adında kısıtlaması yalnızca şu karakterleri kullanılabilir: [ a-zA-Z0-9_.@-]. Diğer karakterler ASCII karşılıklarına dönüştürülür ya da yok sayılır. Çakışmalarda ada bir sayı eklenir. İç kullanıcı adı bir kullanıcıyı içsel olarak belirlemeye yarar. Aynı zamanda kullanıcı ana klasörünün varsayılan adı olarak da kullanılır. İnternet adreslerinin, örneğin *DAV servislerinin bir parçasıdır. Bu seçenek ile varsayılan davranış değiştirilebilir. Değişiklikler yalnızca yeni eşleştirilecek (eklenecek) LDAP kullanıcılarını etkiler. Varsayılan davranışı kullanmak için boş bırakın. ",
"Internal Username Attribute:" : "İç kullanıcı adı özniteliği:",
"Override UUID detection" : "UUID algılaması değiştirilsin",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Varsayılan olarak, UUID özniteliği otomatik olarak algılanır. UUID özniteliği LDAP kullanıcı ve gruplarını kesin olarak belirlemek için kullanılır. Yukarıda başka türlü belirtilmemişse, bu UUID için bir iç kullanıcı adı oluşturulur. Bu ayarı değiştirerek istenilen bir öznitelik belirtilebilir. Ancak istenilen özniteliğin eşsiz olduğundan ve hem kullanıcı hem de gruplar tarafından kullanıldığından emin olunmalıdır. Varsayılan davranış için boş bırakın. Değişiklikler yalnızca yeni eşleştirilen (eklenen) LDAP kullanıcı ve gruplarını etkiler.",
"\"$home\" Placeholder Field" : "\"$home\" Yer Belirleyici Alanı",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "Bir dış depolama yapılandırmasında $home yerine belirtilen öznitelik konulur",
"Internal Username" : "İç kullanıcı adı",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "Varsayılan olarak, iç kullanıcı adı UUID özniteliğinden oluşturulur. Böylece kullanıcı adının eşsiz olması ve dönüştürülmesi gereken karakterler içermediğinden emin olunur. İç kullanıcı adında kısıtlaması yalnızca şu karakterleri kullanılabilir: [ a-zA-Z0-9_.@-]. Diğer karakterler ASCII karşılıklarına dönüştürülür ya da yok sayılır. Çakışmalarda ada bir sayı eklenir. İç kullanıcı adı bir kullanıcıyı içsel olarak belirlemeye yarar. Aynı zamanda kullanıcı ana klasörünün varsayılan adı olarak da kullanılır. İnternet adreslerinin, örneğin *DAV servislerinin bir parçasıdır. Bu seçenek ile varsayılan davranış değiştirilebilir. Değişiklikler yalnızca yeni eşleştirilecek (eklenecek) LDAP kullanıcılarını etkiler. Varsayılan davranışı kullanmak için boş bırakın. ",
"Internal Username Attribute:" : "İç kullanıcı adı özniteliği:",
"Override UUID detection" : "UUID algılaması değiştirilsin",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Varsayılan olarak, UUID özniteliği otomatik olarak algılanır. UUID özniteliği LDAP kullanıcı ve gruplarını kesin olarak belirlemek için kullanılır. Yukarıda başka türlü belirtilmemişse, bu UUID için bir iç kullanıcı adı oluşturulur. Bu ayarı değiştirerek istenilen bir öznitelik belirtilebilir. Ancak istenilen özniteliğin eşsiz olduğundan ve hem kullanıcı hem de gruplar tarafından kullanıldığından emin olunmalıdır. Varsayılan davranış için boş bırakın. Değişiklikler yalnızca yeni eşleştirilen (eklenen) LDAP kullanıcı ve gruplarını etkiler.",
"\"$home\" Placeholder Field" : "\"$home\" 佔位符字段",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "外部存儲配置中的 $home 將替換為指定屬性的值",
"Internal Username" : "內部用戶名稱",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "預設情況下，內部使用者名稱將從 UUID 屬性建立。其確保了使用者名稱是唯一且不需要轉換字元。內部使用者名稱的限制是只能使用下列字元：[a-zA-Z0-9_.@-]。其他字元會使用其 ASCII 對映或被忽略。發生碰撞時，將會加入數字。內部使用者名稱用於內部識別使用者。其也是使用者家資料夾的預設名稱。也是遠端 URL 的一部分，舉例來說，會用於所有 *DAV 服務。使用此設定，預設的行為將會被覆寫。變更僅對新映射（新增）的 LDAP 使用者有效。將其留空會使用預設行為。",
"Internal Username Attribute:" : "內部用戶名稱屬性：",
"Override UUID detection" : "偵測覆寫UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 用戶及群組。此外，如果未在上方指定，內部用戶名稱會基於 UUID 建立。您能覆蓋設定並直接指定屬性，但一定要確保指定的屬性能被用戶及群組取得且唯一。留空則執行默認行為。變更只會對新映射（加入）的 LDAP 用戶及群組生效。",
"\"$home\" Placeholder Field" : "\"$home\" 佔位符字段",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "外部存儲配置中的 $home 將替換為指定屬性的值",
"Internal Username" : "內部用戶名稱",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "預設情況下，內部使用者名稱將從 UUID 屬性建立。其確保了使用者名稱是唯一且不需要轉換字元。內部使用者名稱的限制是只能使用下列字元：[a-zA-Z0-9_.@-]。其他字元會使用其 ASCII 對映或被忽略。發生碰撞時，將會加入數字。內部使用者名稱用於內部識別使用者。其也是使用者家資料夾的預設名稱。也是遠端 URL 的一部分，舉例來說，會用於所有 *DAV 服務。使用此設定，預設的行為將會被覆寫。變更僅對新映射（新增）的 LDAP 使用者有效。將其留空會使用預設行為。",
"Internal Username Attribute:" : "內部用戶名稱屬性：",
"Override UUID detection" : "偵測覆寫UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 用戶及群組。此外，如果未在上方指定，內部用戶名稱會基於 UUID 建立。您能覆蓋設定並直接指定屬性，但一定要確保指定的屬性能被用戶及群組取得且唯一。留空則執行默認行為。變更只會對新映射（加入）的 LDAP 用戶及群組生效。",
"\"$home\" Placeholder Field" : "\"$home\" 佔位字串欄位",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "外部儲存空間設定中的 $home 將會以指定屬性的值取代",
"Internal Username" : "內部使用者名稱",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "預設情況下，內部使用者名稱將從 UUID 屬性建立。其確保了使用者名稱是唯一且不需要轉換字元。內部使用者名稱的限制是只能使用下列字元：[a-zA-Z0-9_.@-]。其他字元會使用其 ASCII 對映或被忽略。發生碰撞時，將會加入數字。內部使用者名稱用於內部識別使用者。其也是使用者家資料夾的預設名稱。也是遠端 URL 的一部分，舉例來說，會用於所有 *DAV 服務。使用此設定，預設的行為將會被覆寫。變更僅對新映射（新增）的 LDAP 使用者有效。將其留空會使用預設行為。",
"Internal Username Attribute:" : "內部使用者名稱屬性：",
"Override UUID detection" : "偵測覆寫 UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 使用者及群組。此外，如果未在上方指定，內部使用者名稱會以 UUID 為基礎建立。您能覆寫設定並直接指定屬性，但一定要確保指定的屬性能被使用者及群組取得且唯一。留空則執行預設行為。變更只會對新映射（新增）的 LDAP 使用者及群組生效。",
"\"$home\" Placeholder Field" : "\"$home\" 佔位字串欄位",
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "外部儲存空間設定中的 $home 將會以指定屬性的值取代",
"Internal Username" : "內部使用者名稱",
+ "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [a-zA-Z0-9_.@-]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Changes will have effect only on newly mapped (added) LDAP users. Leave it empty for default behavior." : "預設情況下，內部使用者名稱將從 UUID 屬性建立。其確保了使用者名稱是唯一且不需要轉換字元。內部使用者名稱的限制是只能使用下列字元：[a-zA-Z0-9_.@-]。其他字元會使用其 ASCII 對映或被忽略。發生碰撞時，將會加入數字。內部使用者名稱用於內部識別使用者。其也是使用者家資料夾的預設名稱。也是遠端 URL 的一部分，舉例來說，會用於所有 *DAV 服務。使用此設定，預設的行為將會被覆寫。變更僅對新映射（新增）的 LDAP 使用者有效。將其留空會使用預設行為。",
"Internal Username Attribute:" : "內部使用者名稱屬性：",
"Override UUID detection" : "偵測覆寫 UUID",
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 使用者及群組。此外，如果未在上方指定，內部使用者名稱會以 UUID 為基礎建立。您能覆寫設定並直接指定屬性，但一定要確保指定的屬性能被使用者及群組取得且唯一。留空則執行預設行為。變更只會對新映射（新增）的 LDAP 使用者及群組生效。",
"{temperature} {unit} partly cloudy" : "{temperature} {unit} hodei-tarteak",
"{temperature} {unit} foggy later today" : "{temperature} {unit} lainotu egingo da geroago",
"{temperature} {unit} foggy" : "{temperature} {unit} lainotsu",
- "{temperature} {unit} light rainfall later today" : "{tenperatura} {unitatea} eurite arina gaur beranduago",
- "{temperature} {unit} light rainfall" : "{tenperatura} {unitatea} prezipitazio arina",
+ "{temperature} {unit} light rainfall later today" : "{temperature} {unit} eurite arina gaur beranduago",
+ "{temperature} {unit} light rainfall" : "{temperature} {unit} prezipitazio arina",
"{temperature} {unit} rainfall later today" : "{temperature} {unit} prezipitazioa gaur beranduago",
- "{temperature} {unit} rainfall" : "{tenperatura} {unitatea} prezipitazioa",
- "{temperature} {unit} heavy rainfall later today" : "{tenperatura} {unitatea} eurite handia gaur beranduago",
- "{temperature} {unit} heavy rainfall" : "{tenperatura} {unitatea} euri-jasa",
+ "{temperature} {unit} rainfall" : "{temperature} {unit} prezipitazioa",
+ "{temperature} {unit} heavy rainfall later today" : "{temperature} {unit} eurite handia gaur beranduago",
+ "{temperature} {unit} heavy rainfall" : "{temperature} {unit} euri-jasa",
"{temperature} {unit} rainfall showers later today" : "{temperature} {unit} euri zaparrada gaur beranduago",
- "{temperature} {unit} rainfall showers" : "{tenperatura} {unitatea} euri zaparradak gaur beranduago",
+ "{temperature} {unit} rainfall showers" : "{temperature} {unit} euri zaparradak gaur beranduago",
"{temperature} {unit} light rainfall showers later today" : "{temperature} {unit} zaparrada arinak gaur beranduago",
- "{temperature} {unit} light rainfall showers" : "{tenperatura} {unitatea} zaparrada arinak",
+ "{temperature} {unit} light rainfall showers" : "{temperature} {unit} zaparrada arinak",
"{temperature} {unit} heavy rainfall showers later today" : "{temperature} {unit} euri zaparrada handiak gaur beranduago",
- "{temperature} {unit} heavy rainfall showers" : "{tenperatura} {unitatea} euri zaparrada handiak",
+ "{temperature} {unit} heavy rainfall showers" : "{temperature} {unit} euri zaparrada handiak",
"More weather for {adr}" : "Eguraldi gehiago {adr}-(e)rako",
"Loading weather" : "Eguraldia kargatzen",
"Remove from favorites" : "Kendu gogokoetatik",
"{temperature} {unit} partly cloudy" : "{temperature} {unit} hodei-tarteak",
"{temperature} {unit} foggy later today" : "{temperature} {unit} lainotu egingo da geroago",
"{temperature} {unit} foggy" : "{temperature} {unit} lainotsu",
- "{temperature} {unit} light rainfall later today" : "{tenperatura} {unitatea} eurite arina gaur beranduago",
- "{temperature} {unit} light rainfall" : "{tenperatura} {unitatea} prezipitazio arina",
+ "{temperature} {unit} light rainfall later today" : "{temperature} {unit} eurite arina gaur beranduago",
+ "{temperature} {unit} light rainfall" : "{temperature} {unit} prezipitazio arina",
"{temperature} {unit} rainfall later today" : "{temperature} {unit} prezipitazioa gaur beranduago",
- "{temperature} {unit} rainfall" : "{tenperatura} {unitatea} prezipitazioa",
- "{temperature} {unit} heavy rainfall later today" : "{tenperatura} {unitatea} eurite handia gaur beranduago",
- "{temperature} {unit} heavy rainfall" : "{tenperatura} {unitatea} euri-jasa",
+ "{temperature} {unit} rainfall" : "{temperature} {unit} prezipitazioa",
+ "{temperature} {unit} heavy rainfall later today" : "{temperature} {unit} eurite handia gaur beranduago",
+ "{temperature} {unit} heavy rainfall" : "{temperature} {unit} euri-jasa",
"{temperature} {unit} rainfall showers later today" : "{temperature} {unit} euri zaparrada gaur beranduago",
- "{temperature} {unit} rainfall showers" : "{tenperatura} {unitatea} euri zaparradak gaur beranduago",
+ "{temperature} {unit} rainfall showers" : "{temperature} {unit} euri zaparradak gaur beranduago",
"{temperature} {unit} light rainfall showers later today" : "{temperature} {unit} zaparrada arinak gaur beranduago",
- "{temperature} {unit} light rainfall showers" : "{tenperatura} {unitatea} zaparrada arinak",
+ "{temperature} {unit} light rainfall showers" : "{temperature} {unit} zaparrada arinak",
"{temperature} {unit} heavy rainfall showers later today" : "{temperature} {unit} euri zaparrada handiak gaur beranduago",
- "{temperature} {unit} heavy rainfall showers" : "{tenperatura} {unitatea} euri zaparrada handiak",
+ "{temperature} {unit} heavy rainfall showers" : "{temperature} {unit} euri zaparrada handiak",
"More weather for {adr}" : "Eguraldi gehiago {adr}-(e)rako",
"Loading weather" : "Eguraldia kargatzen",
"Remove from favorites" : "Kendu gogokoetatik",
"Images" : "Bilder",
"Office documents" : "Office-Dokumente",
"PDF documents" : "PDF-Dokumente",
- "Custom mimetype" : "Benutzerdefinierter Mime-Typ",
+ "Custom mimetype" : "Benutzerdefinierter MIME-Typ",
"Select a tag" : "Schlagwort auswählen",
"No results" : "Keine Ergebnisse",
"%s (invisible)" : "%s (unsichtbar)",
"Images" : "Bilder",
"Office documents" : "Office-Dokumente",
"PDF documents" : "PDF-Dokumente",
- "Custom mimetype" : "Benutzerdefinierter Mime-Typ",
+ "Custom mimetype" : "Benutzerdefinierter MIME-Typ",
"Select a tag" : "Schlagwort auswählen",
"No results" : "Keine Ergebnisse",
"%s (invisible)" : "%s (unsichtbar)",
projects / nextcloud-server.git / commitdiff