From: Constantin Kaplinsky Date: Tue, 8 Jan 2008 13:48:19 +0000 (+0000) Subject: Documented TightVNC-specific parameters properly. X-Git-Tag: v0.0.90~384^2~76 X-Git-Url: https://source.dussan.org/?a=commitdiff_plain;h=b8363be33ab87eafede5ca2b89ab664b38dafb54;p=tigervnc.git Documented TightVNC-specific parameters properly. git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@2393 3789f03b-4d11-0410-bbf8-ca57d06f2519 --- diff --git a/unix/x0vncserver/x0vncserver.man b/unix/x0vncserver/x0vncserver.man index 6dc7d3ed..a2570e5a 100644 --- a/unix/x0vncserver/x0vncserver.man +++ b/unix/x0vncserver/x0vncserver.man @@ -51,9 +51,16 @@ Log level should be a value between 0 and 100, higher levels produce more output. .TP .B HostsFile -.\" FIXME: Document this. -File with IP access control rules. Default is to allow connections from any -IP address. +This parameter allows to specify a file name with IP access control rules. +The file should include one rule per line, and the rule format is one of the +following: +\fIaddress\fP/\fInetmask\fP (accept connections from the +specified address group), -\fIaddress\fP/\fInetmask\fP (reject connections) +or ?\fIaddress\fP/\fInetmask\fP (query the local user). The first rule +matching the IP address determines the action to be performed. Rules that +include only an action sign (+, - or ?) will match any IP address. +\fINetmask\fP is optional and can be specified either in dotted format +(e.g. /255.255.255.0), or as a single number of bits (e.g. /24). Default is +to accept connections from any IP address. .TP .B SecurityTypes Specify which security scheme to use for incoming connections. Valid values @@ -114,12 +121,13 @@ Always use RFB protocol version 3.3 for backwards compatibility with badly-behaved clients. Default is off. .TP .B Geometry -.\" FIXME: Document this. -Screen area shown to VNC clients. Format is +This option specifies the screen area that will be shown to VNC clients. The +format is .B \fIwidth\fPx\fIheight\fP+\fIxoffset\fP+\fIyoffset\fP -, see more information in the manual page for \fBX\fP(1), section GEOMETRY -SPECIFICATIONS. If the argument is empty, full screen is shown to VNC -clients (this is the default). +, where `+' signs can be replaced with `-' signs to specify offsets from the +right and/or from the bottom of the screen. Offsets are optional, +0+0 is +assumed by default (top left corner). If the argument is empty, full screen +is shown to VNC clients (this is the default). .TP .B MaxProcessorUsage Maximum percentage of CPU time to be consumed when polling the @@ -130,25 +138,53 @@ Milliseconds per one polling cycle. Actual interval may be dynamically adjusted to satisfy \fBMaxProcessorUsage\fP setting. Default is 30. .TP .B VideoPriority -.\" FIXME: Document this. -Priority of sending updates for video area (0..8). Default is 2. +Specify the priority of sending video area updates. \fBx0vncserver\fP can +detect video areas on the screen and handle them separately for improved +performance. This parameter controls how often video area will be sent to +clients as compared to the rest of the screen. The priority must be an +integer between 0 and 8, and the default value is 2. + +\fBVideoPriority\fP set to 0 disables video detection completely, so +\fBx0vncserver\fP will not use any video-specific tricks. + +The value 1 gives the same priority both to video and to other pixels. That +differs from the value 0 \- overall performance can be much better if there +is some video on the screen. That's because video-specific polling and +encoding algorithms can be used. + +Higher values give more priority to video. For example, \fBVideoPriority\fP +set to 5 specifies that the rate of sending video will be five times higher +than the rate of updating the rest of the screen. + +\fBNote:\fP with high \fBVideoPriority\fP values, video detection will work +slower. For example, when the video area was moved, this fact will be +discovered with a longer delay. That's because high priority values make the +server send video with highest rate possible, without spending time on +polling and video detection. + .TP .B CompareFB Perform pixel comparison on framebuffer to reduce unnecessary updates. Default is on. .TP .B UseSHM -.\" FIXME: Document this. -Use MIT-SHM extension if available. Default is on. +Use MIT-SHM extension if available. Using that extension accelerates reading +the screen. Default is on. .TP .B OverlayMode -.\" FIXME: Document this. -Use overlay mode under IRIX or Solaris. Default is on. +Use overlay mode in IRIX or Solaris (does not have effect in other systems). +This enables system-specific access to complete full-color version of the +screen (the default X visual often provides 256 colors). Also, in overlay +mode, \fBx0vncserver\fP can show correct mouse cursor. Default is on. .TP .B UseHardwareJPEG -.\" FIXME: Document this. -Use hardware-accelerated JPEG compressor for video if available. Default is -on. +Use hardware-accelerated JPEG compressor for video if available. +\fBx0vncserver\fP can detect video areas on the screen and handle them +separately from the rest of the screen, for better performance. If the +client supports Tight encoding and JPEG compression, such video areas will be +sent as JPEG-encoded rectangles. And if this option is on, compression will +be hardware-accelerated (currently, supported only in SGI/IRIX equipped with +appropriate hardware). Default is on. .TP .B ZlibLevel Zlib compression level for ZRLE encoding (it does not affect Tight encoding).