reftable: read file footer in ReftableReader#allRefs
allRefs determined the end of the ref block without accounting for
index or log blocks. This could cause other blocks to be interpreted
as ref blocks, leading to "invalid block" error messages.
Matthias Sohn [Tue, 10 Sep 2019 14:08:45 +0000 (16:08 +0200)]
Fix WorkingTreeIterator.compareMetadata() for CheckStat.MINIMAL
If CheckStat is MINIMAL or timestamps have no nanosecond part
WorkingTreeIterator.compareMetaData only checks the second part of
timestamps and ignores nanoseconds which may have ended up in the index
by using native git.
we currently proceed comparing fileLastModified and cacheLastModified
with full precision which is wrong since we determined that we detected
reduced timestamp resolution.
Fix this and also handle smudged index entries for CheckStat.MINIMAL.
Change-Id: I6149885903ac63d79b42d234cc02aa4e19578f3c Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Sun, 8 Sep 2019 15:36:59 +0000 (17:36 +0200)]
Merge branch 'stable-5.5'
* stable-5.5:
bazel: fix running http tests
Set parameter name in parameterized http tests
Format BUILD files with buildifier
Format BUILD files with buildifier
[error prone] Suppress NonAtomicVolatileUpdate in SimpleLruCache
Bazel: Format BUILD files with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Fix warning about deprecated lib.bzl
Format lib/BUILD with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Bump minimum supported version to 0.29.0
Bazel: Bump skylib library version to 0.8.0
Use bazelisk to switch between used bazel version
Bazel: Require minimum bazel version 0.17.1
Fix wrong placeholder index in error message packInaccessible
JGitText: Remove unused externalized strings
RepoText: Remove unused externalized string
CLI: Remove unused externalized strings
Change-Id: Idb0848dd33a76328b24908dc86db335cca742a1c Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Sun, 8 Sep 2019 15:35:14 +0000 (17:35 +0200)]
Merge branch 'stable-5.4' into stable-5.5
* stable-5.4:
Format BUILD files with buildifier
Format BUILD files with buildifier
[error prone] Suppress NonAtomicVolatileUpdate in SimpleLruCache
Bazel: Format BUILD files with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Fix warning about deprecated lib.bzl
Format lib/BUILD with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Bump minimum supported version to 0.29.0
Bazel: Bump skylib library version to 0.8.0
Use bazelisk to switch between used bazel version
Bazel: Require minimum bazel version 0.17.1
Fix wrong placeholder index in error message packInaccessible
JGitText: Remove unused externalized strings
RepoText: Remove unused externalized string
CLI: Remove unused externalized strings
Change-Id: Idf3abd80ad3b00188f655e638d9908228770911f Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Sun, 8 Sep 2019 13:05:19 +0000 (15:05 +0200)]
Merge branch 'stable-5.3' into stable-5.4
* stable-5.3:
Format BUILD files with buildifier
[error prone] Suppress NonAtomicVolatileUpdate in SimpleLruCache
Bazel: Format BUILD files with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Fix warning about deprecated lib.bzl
Format lib/BUILD with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Bump minimum supported version to 0.29.0
Bazel: Bump skylib library version to 0.8.0
Use bazelisk to switch between used bazel version
Bazel: Require minimum bazel version 0.17.1
Fix wrong placeholder index in error message packInaccessible
JGitText: Remove unused externalized strings
RepoText: Remove unused externalized string
CLI: Remove unused externalized strings
Change-Id: Iaea77a89fcd821df5dbb24f5e3e39e6d1dfc0bd4 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Sun, 8 Sep 2019 09:17:32 +0000 (11:17 +0200)]
Merge branch 'stable-5.2' into stable-5.3
* stable-5.2:
[error prone] Suppress NonAtomicVolatileUpdate in SimpleLruCache
Bazel: Format BUILD files with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Fix warning about deprecated lib.bzl
Format lib/BUILD with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Bump minimum supported version to 0.29.0
Bazel: Bump skylib library version to 0.8.0
Use bazelisk to switch between used bazel version
Bazel: Require minimum bazel version 0.17.1
Fix wrong placeholder index in error message packInaccessible
JGitText: Remove unused externalized strings
RepoText: Remove unused externalized string
CLI: Remove unused externalized strings
Change-Id: I0d8b7f79177a20dc00c89e2cf0005eb3d3039532 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Sat, 7 Sep 2019 09:07:21 +0000 (11:07 +0200)]
Merge branch 'stable-5.1' into stable-5.2
* stable-5.1:
Bazel: Fix warning about deprecated lib.bzl
Format lib/BUILD with buildifier
Bazel: Add fixes for --incompatible_load_java_rules_from_bzl
Bazel: Bump minimum supported version to 0.29.0
Bazel: Bump skylib library version to 0.8.0
Use bazelisk to switch between used bazel version
Bazel: Require minimum bazel version 0.17.1
Fix wrong placeholder index in error message packInaccessible
JGitText: Remove unused externalized strings
RepoText: Remove unused externalized string
CLI: Remove unused externalized strings
Change-Id: Iea37a8e39e9d4872dc607c9222dcf191ce4e4757 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
David Pursehouse [Wed, 10 Oct 2018 01:53:35 +0000 (10:53 +0900)]
Bazel: Require minimum bazel version 0.17.1
Check the bazel version using the checker from bazel_skylib, and
require at least version 0.17.1 which is the minimum version that
does not suffer from the Java API mismatch issue [1].
The implementation is borrowed from the Gerrit project.
Yunjie Li [Thu, 15 Aug 2019 17:39:25 +0000 (10:39 -0700)]
ReceivePack: Prevent pointing a branch to a non-commit object
Since commit c3b0dec509fe136c5417422f31898b5a4e2d5e02, Git has
disallowed writing a non-commit to refs/heads/* refs. JGit still
allows that, which can put users in a bad situation. For example,
git push origin v1.0:master
pushes the tag object v1.0 to refs/heads/master, instead of the
intended commit object v1.0^{commit}.
Prevent that by validating that the target of the ref points to a
commit object when pushing to refs/heads/*.
Git performs the same check at a lower level (in the RefDatabase). We
could do the same here, but for now let's start conservatively by
handling it in pushes first.
[jn: fleshed out commit message]
Change-Id: I8f98ae6d8acbcd5ef7553ec732bc096cb6eb7c4e Signed-off-by: Yunjie Li <yunjieli@google.com> Signed-off-by: Jonathan Nieder <jrn@google.com>
Matthias Sohn [Tue, 3 Sep 2019 22:32:42 +0000 (00:32 +0200)]
Merge branch 'stable-5.2' into stable-5.3
* stable-5.2:
Prepare 5.1.12-SNAPSHOT builds
JGit v5.1.11.201909031202-r
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: I7e88c7c7d202f1e3fb8e143277650aa5fefff439 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Tue, 3 Sep 2019 21:41:03 +0000 (23:41 +0200)]
Merge branch 'stable-5.1' into stable-5.2
* stable-5.1:
Prepare 5.1.12-SNAPSHOT builds
JGit v5.1.11.201909031202-r
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Iac5dc9683cea97db04d20f27c10f2e103d3ae7b5 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Tue, 3 Sep 2019 14:02:44 +0000 (16:02 +0200)]
Merge branch 'stable-5.0' into stable-5.1
* stable-5.0:
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: I172136a031ff0730e575327cafb3527c9650a71d Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Tue, 3 Sep 2019 13:54:54 +0000 (15:54 +0200)]
Merge branch 'stable-4.11' into stable-5.0
* stable-4.11:
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Ifb6a4dbea2f48fd2ffa66eb737d61920aefedfbd Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Tue, 3 Sep 2019 12:23:29 +0000 (14:23 +0200)]
Merge branch 'stable-4.10' into stable-4.11
* stable-4.10:
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: If672b4f0c350f4e8ff7e1e706485cffd8137236d Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Tue, 3 Sep 2019 11:24:28 +0000 (13:24 +0200)]
Merge branch 'stable-4.9' into stable-4.10
* stable-4.9:
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Id5bf44645655fca40ad22bb1f1ad20a7c2e8f6db Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Han-Wen Nienhuys [Sat, 31 Aug 2019 19:33:58 +0000 (21:33 +0200)]
BatchRefUpdate: repro racy atomic update, and fix it
PackedBatchRefUpdate was creating a new packed-refs list that was
potentially unsorted. This would be papered over when the list was
read back from disk in parsePackedRef, which detects unsorted ref
lists on reading, and sorts them. However, the BatchRefUpdate also
installed the new (unsorted) list in-memory in
RefDirectory#packedRefs.
With the timestamp granularity code committed to stable-5.1, we can
more often accurately decide that the packed-refs file is clean, and
will return the erroneous unsorted data more often. Unluckily timed
delays also cause the file to be clean, hence this problem was
exacerbated under load.
The symptom is that refs added by a BatchRefUpdate would stop being
visible directly after they were added. In particular, the Gerrit
integration tests uses BatchRefUpdate in its setup for creating the
Admin group, and then tries to read it out directly afterward.
The tests recreates one failure case. A better approach would be to
revise RefList.Builder, so it detects out-of-order lists and
automatically sorts them.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=548716 and
https://bugs.chromium.org/p/gerrit/issues/detail?id=11373.
Matthias Sohn [Tue, 18 Jun 2019 09:32:59 +0000 (11:32 +0200)]
Fix RacyGitTests#testRacyGitDetection
This test case assumed file system timestamp resolution of 1 second. On
filesystems with a finer resolution this test fails since the index
entry is only smudged if the file index entry's lastModified and the
lastModified of the git index itself are within the same filesystem
timer tick. Fix this by ensuring that these timestamps are identical
which should work for any filesystem timer resolution.
Bug: 548188
Change-Id: Id84d59e1cfeb48fa008f8f27f2f892c4f73985de Signed-off-by: Matthias Sohn <matthias.sohn@sap.com> Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
(cherry picked from commit 1159f9dd7c80a53c2509cd75d997a6afed37f9a6)
Thomas Wolf [Thu, 4 Jul 2019 18:00:48 +0000 (20:00 +0200)]
sshd: fix proxy connections with the DefaultProxyDataFactory
The java.net.ProxySelector is quite a bit different from the one
in Eclipse. Eclipse (and the OS) uses "socks" as URI scheme to
look up a SOCKS proxy. java.net.ProxySelector needs "socket" as
scheme (and internally maps that to "socks" if and when it asks
the OS about the proxies).
Moreover, java.net.ProxySelector may return unresolved addresses,
whereas the Eclipse proxy selector always returns resolved addresses.
Fix both by explicitly resolving unresolved proxy addresses and using
scheme "socket" in the DefaultProxyDataFactory.
Tested manually with the jgit command-line tool using ssh -vvv -D7020
localhost and 3proxy as SOCKS5 proxies on localhost (3proxy with
user/password authentication). Start jgit with _JAVA_OPTIONS set to
"-DsocksProxyHost=<host> -DsocksProxyPort=<port>
-Djava.net.useSystemProxies=false" to test manually.
Bug: 548965
Change-Id: Ib81ae8255ac2f9c48268f172e7d8ebb4a792b66d Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf [Thu, 20 Jun 2019 17:43:49 +0000 (19:43 +0200)]
sshd: configurable server key verification
Provide a wrapper interface and change the implementation such that
a client can substitute its own database of known hosts keys instead
of the default file-based mechanism.
Bug: 547619
Change-Id: Ifc25a4519fa5bcf7bb8541b9f3e2de15215e3d66 Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf [Thu, 20 Jun 2019 17:42:21 +0000 (19:42 +0200)]
sshd: allow setting a null ssh config
The same effect could already be obtained if the ~/.ssh/config file
did not exist. But that is more difficult to control by clients,
since JGit would pick up the config if it was then created. Therefore
allow specifying a null config explicitly to permanently switch off
config file handling.
Change-Id: Iedf8a7f4d5c1ca08e0a513ed28301d8e5261b22a Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf [Thu, 20 Jun 2019 17:41:33 +0000 (19:41 +0200)]
sshd: simplify OpenSshServerKeyVerifier
Reduce the dependency on the ClientSession in preparation to
remove it altogether. Remove the internal helper, re-implement
the needed bits. We have not implemented any configuration
possibility in JGit for creating hashed host names in known hosts
files, so we don't need the sshd code that theoretically would
enable this.
Change-Id: I295f5106b60e1cc3a9d085b0cb7ff747daae88be Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* changes:
dfs: Take size as long instead of int
dfs: Read at the aligned position
dfs: Add a position argument
dfs: Move the deeply nested code to its own method
Matthias Sohn [Mon, 26 Aug 2019 20:43:11 +0000 (22:43 +0200)]
Return a new instance from openSystemConfig and openUserConfig
Move the handling of cached user and system config to getSystemConfig
and getUserConfig methods and revert the implementation of
openSystemConfig and openUserConfig to the old stateless
implementation.
This ensures the open methods respect the passed-in parent config, which
may be different on each invocation. Additionally, returning a new
instance matches the behavior of the previous implementation of the
default system reader, which downstream callers may be depending on.
Move the implementation of the new caching methods getSystemConfig and
getUserConfig up to SystemReader. This avoids that we break the ABI for
subclasses of SystemReader.
Also see [1] which fixed a similar problem with Gerrit's custom
SystemReader.
Jonathan Tan [Wed, 28 Aug 2019 16:45:21 +0000 (09:45 -0700)]
DfsCachedPack: Add accessor for packfile object
In order to support implementations of CachedPackUriProvider (which need
to supply, among other things, the checksum of the packfile
corresponding to a CachedPack), in a004820858 ("UploadPack: support
custom packfile-to-URI mapping", 2019-08-20), the method getCheckSum()
was added to PackIndex. However, there is no way to access the PackIndex
from a DfsCachedPack.
Therefore, add an accessor for the DfsPackFile stored in the
DfsCachedPack. Now, a user who has a DfsCachedPack can use
DfsCachedPack#getPackFile then DfsPackFile#getPackIndex then
PackIndex#getCheckSum to obtain the checksum of a pack.
Change-Id: Ia010c016f6cac0f058ee20eff4c10f57338bfefc Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Alex Spradlin [Tue, 13 Aug 2019 22:20:07 +0000 (15:20 -0700)]
RevWalk: Traverse all parents of UNINTERESTING commits
When firstParent is set, RevWalk traverses only the first parent of a
commit, even though that commit is UNINTERESTING. Since we want the
maximal UNINTERESTING set, we shouldn't prune any parents here. This
issue is apparent only when some of the commits being traversed are
unparsed, since walker.carryFlagsImpl() propagates the UNINTERESTING
flag to all parsed ancestors, masking the issue.
Therefore teach RevWalk to traverse all parents when a commit is
UNINTERESTING and not only the first parent. Since this issue is
masked by commit parsing, also test situations when the commits
involved are unparsed.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: I95e2ad9ae8f1f50fbecae674367ee7e0855519b1
Thomas Wolf [Sun, 11 Aug 2019 20:37:48 +0000 (22:37 +0200)]
Apache HTTP: run more tests
Factor out the test parameterization to use both connection factories
into a common super class and use it in more tests.
This made HttpClientTests.testV2HttpSubsequentResponse() fail for
Apache HTTP. The test used the pattern
- create POST connection
- setDoOutput(true)
- connect()
- write output stream
- get & read input stream
This pattern is never used in JGit, which actually calls connect() only
in one case in LFS, and that's on a HEAD request.
The above pattern works on JDK, but fails on Apache HTTP because with
Apache HTTP a connect() actually executes the full request including
writing the entity. To work with Apache HTTP, the pattern would need
to be
- create POST connection
- setDoOutput(true)
- write output stream
- connect()
- get & read input stream
which is fine for both. JDK connects implicitly in getOutputStream()
and treats the later explicit connect() as a no-op, and Apache works
because the entity is written when connect() is called.
Because JDK connects implicitly on getOutputStream(), the following
pattern also works with JDK:
- create POST connection
- setDoOutput(true)
- write output stream
- get & read input stream
Support this with Apache HTTP too: let getInputStream() execute
the request if it wasn't executed already.
Remove explicit connect() calls from test code, since JGit doesn't do
those either.
Change-Id: Ica038c00a7b8edcc01d5660d18e961146305b87f Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf [Thu, 1 Aug 2019 19:04:31 +0000 (21:04 +0200)]
JGit pgm: make Blame more robust against bogus input
Make the command die with proper messages when the revision
cannot be resolved or the file doesn't exist in the repository.
Previously the command would throw NPEs in these cases.
Bug: 490798
Change-Id: Ia457347aa22cf6bd2c2b6e7b9d705a66b3826307 Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Matthias Sohn [Sun, 25 Aug 2019 21:01:38 +0000 (23:01 +0200)]
Update target platform to S20190819183153 (2019-09 M3)
* rename 4.12 staging to 4.12
* verified there are no version number changes between 4.12-staging and
new 4.12 final
* create 4.13-staging from former 4.12-staging
* update orbit to latest snapshot
* sort entries in S20190819183153.tpd
Change-Id: I1c3992b1dae2282a8c057e1453a6b63664d09207 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
projects / jgit.git / log