DirCacheCheckout is generating names for temporary files. It was not checking
the length of this filenames. It may happen that a generated filename is
longer than 255 chars which causes problems on certain platforms. Make sure
that filenames for temporary files do not exceed 255 chars.
Zhen Chen [Wed, 3 May 2017 21:56:40 +0000 (14:56 -0700)]
Reset ObjectWalker when it starts a new walk
The ObjectWalker in PackWriterBitmapWalker needs to be reset whenever it
starts a new walk. Move this responsibility from the caller to the
method when the new walk starts.
Some repository topologies can cause carryOntoHistory to overflow the
thread stack, due to its strategy of recursing into the 2nd+ parents
of a merge commit. This can easily happen if a project maintains a
local fork, and frequently pulls from the upstream repository, which
itself may have a branchy history.
Rewrite the carryOntoHistory algorithm to use a fixed amount of thread
stack, pushing the save points onto the heap. By using heap space the
thread stack depth is no longer a concern. Repositories are instead
limited by available memory.
The algorithm is now structured as two loops:
carryOntoHistory: This outer loop pops saved commits off the top of
the stack, allowing the inner loop algorithm to dive down that path
and carry bits onto commits along that part of the graph. The loop
ends when there are no more stack elements.
carryOntoHistoryInner: The inner loop walks along a single path of
the graph. For a string of pearls (commits with one parent each)
r <- s <- t <- u
the algorithm walks backwards from u to r by iteratively updating
its local variable 'c'. This avoids heap allocation along a simple
path that does not require remembering state.
The inner loop breaks in the HAVE_ALL case, when all bits have been
found to be previously set on the commit. This occurs when a prior
iteration of the outer loop (carryOntoHistory) explored a different
path to this same commit, and copied the bits onto it.
When the inner loop encounters a merge commit, it pushes all parents
onto the heap based stack by allocating individual CarryStack
elements for each parent. Parents are pushed in order, allowing
side branches to be explored first.
A small optimization is taken for the last parent, avoiding pushing
it and instead updating 'c', allowing the side branch to be entered
without allocating a CarryStack.
Delete expired garbage even when there is no GC pack present.
Delete the condition to check whether the garbage pack creation time
is older than the last GC operation, because it's not possible to
find the last GC operation time when there is no GC pack.
Add additional tests to make sure the contents of the expired garbage
packs are considered during the GC operation and any actively
referenced objects from the garbage packs are copied successfully
into the GC pack before deleting the garbage pack.
Martin Fick [Fri, 31 Mar 2017 17:31:47 +0000 (11:31 -0600)]
Add parseCommit(AnyObjectId) method to Repository.
It is quite common to want to parse a commit without already having a
RevWalk. Provide a shortcut to do so to make it more convenient, and to
ensure that the RevWalk is released afterwards.
Signed-off-by: Martin Fick<mfick@codeaurora.org>
Change-Id: I9528e80063122ac318f115900422a24ae49a920e
Dan Willemsen [Tue, 15 Nov 2016 23:33:53 +0000 (15:33 -0800)]
RepoCommand: Add linkfile support.
Android wants them to work, and we're only interested in them for bare
repos, so add them just for that.
Make sure to use symlinks instead of just using the copyfile
implementation. Some scripts look up where they're actually located in
order to find related files, so they need the link back to their
project.
Change-Id: I929b69b2505f03036f69e25a55daf93842871f30 Signed-off-by: Dan Willemsen <dwillemsen@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Jeff Gaston <jeffrygaston@google.com> Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Jonathan Nieder [Mon, 17 Apr 2017 18:16:50 +0000 (11:16 -0700)]
Process all "have"s even when MissingObjectException is encountered
Because objects described by the client using "have" lines do not need
to be reachable by any ref on the server, it is possible for them to
point to missing objects in the reachability graph. When such an
object is encountered, I1097a2defa4a9dcf502ca8baca5d32880378818f (Only
throw MissingObjectException when necessary, 2017-03-29) aborts the
"have" walk early to salvage the fetch. The downside of that change
is that remaining "have"s are ignored unless they pointed directly to
an object with a bitmap. In the worst case this can increase the
bandwidth cost of a fetch to the cost of a clone because most "have"s
are ignored.
Avoid this cost by bypassing the failed "have" completely and moving
on to the remaining "have"s.
Martin Fick [Tue, 24 Jan 2017 18:00:54 +0000 (11:00 -0700)]
Prevent alternates loop
When looping through alternates, prevent visiting the same object
directory twice. This could happen when the objects/info/alternates file
includes itself directly or indirectly via a another repo and its
alternates file.
Change-Id: I79bb3da099ebc3c262d2e6c61ed4578eb1aa3474 Signed-off-by: James Melvin <jmelvin@codeaurora.org> Signed-off-by: Martin Fick <mfick@codeaurora.org> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
David Pursehouse [Thu, 13 Apr 2017 05:14:55 +0000 (14:14 +0900)]
Bazel: Restrict src globs to Java source files
Generating the src list with an unrestricted wildcard causes all
files in the source tree to be included. This results in junk files
such as .orig (generated during merge conflict resolution) to be
included, which causes in a build error:
in srcs attribute of java_library rule //org.eclipse.jgit:jgit:
file '//org.eclipse.jgit:src/org/eclipse/jgit/gitrepo/RepoCommand.java.orig'
is misplaced here (expected .java, .srcjar or .properties).
Modify the globs to only include Java source files.
Change-Id: Iaef3db33ac71d71047cd28acb0378e15cb09ece9 Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Han-Wen Nienhuys [Tue, 28 Mar 2017 12:00:38 +0000 (14:00 +0200)]
Fix RepoCommand to allow for relative URLs
This is necessary for deploying submodules on android.googlesource.com.
* Allow an empty base URL. This is useful if the 'fetch' field is "."
and all names are relative to some host root.
* The URLs in the resulting superproject are relative to the
superproject's URL. Add RepoCommand#setDestinationURI to
set this. If unset, the existing behavior is maintained.
* Add two tests for the Android and Gerrit case, checking the URL
format in .gitmodules; the tests use a custom RemoteReader which is
representative of the use of this class in Gerrit's Supermanifest
plugin.
Change-Id: Ia75530226120d75aa0017c5410fd65d0563e91b Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Zhen Chen [Thu, 30 Mar 2017 05:47:23 +0000 (22:47 -0700)]
Only throw MissingObjectException when necessary
When preparing the bitmap, the flag ignoreMissingStart only applied to
the start object. However, sometime the start object is present but some
related objects are not present during the walk, we should only release
the MissingObjectException when the ignoreMissingStart is set false.
Dave Borowitz [Fri, 31 Mar 2017 15:49:12 +0000 (11:49 -0400)]
Support creating Mergers without a Repository
All that's really required to run a merge operation is a single
ObjectInserter, from which we can construct a RevWalk, plus a Config
that declares a diff algorithm. Provide some factory methods that don't
take Repository.
Masaya Suzuki [Fri, 31 Mar 2017 20:54:02 +0000 (13:54 -0700)]
Buffer the response until request parsing has done
This is a continuation from https://git.eclipse.org/r/#/c/4716/. For a
non-bidirectional request, we need to consume the request before writing
any response. In UploadPack, we write "shallow"/"unshallow" responses
before parsing "have" lines. This has happened not to be a problem most
of the time in the smart HTTP protocol because the underlying
InputStream has a 32 KiB buffer in SmartOutputStream.
KB Sriram [Wed, 22 Mar 2017 18:42:38 +0000 (11:42 -0700)]
Make diff locations more consistent
DiffAlgorithms can return different edit locations for inserts or
deletes, if they can be "shifted" up or down repeating blocks of
lines. This causes the 3-way merge to apply both edits, resulting in
incorrectly removing or duplicating lines.
Augment an existing "tidy-up" stage in DiffAlgorithm to move all
shiftable edits (not just the last INSERT edit) to a consistent
location, and add test cases for previously incorrect merges.
Matthias Sohn [Mon, 27 Mar 2017 08:52:36 +0000 (10:52 +0200)]
Merge branch 'stable-4.6'
* stable-4.6:
Only mark packfile invalid if exception signals permanent problem
Don't flag a packfile invalid if opening existing file failed
Prepare 4.5.2-SNAPSHOT builds
Change-Id: Ife4efad1135d3870a5a0fb71e60b9524fb8777ab Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
David Pursehouse [Mon, 27 Mar 2017 01:14:50 +0000 (10:14 +0900)]
Merge branch 'stable-4.5' into stable-4.6
* stable-4.5:
Only mark packfile invalid if exception signals permanent problem
Don't flag a packfile invalid if opening existing file failed
Prepare 4.5.2-SNAPSHOT builds
Change-Id: I20b50981adc54c426666015ff04fe3bb1db9abd9 Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Matthias Sohn [Sat, 25 Mar 2017 01:33:06 +0000 (02:33 +0100)]
Only mark packfile invalid if exception signals permanent problem
Add NoPackSignatureException and UnsupportedPackVersionException to
explicitly mark permanent unrecoverable problems with a pack
Assume problem with a pack is permanent only if we are sure the
exception signals a non-transient problem we can't recover from:
- AccessDeniedException: we lack permissions
- CorruptObjectException: we detected corruption
- EOFException: file ended unexpectedly
- NoPackSignatureException: pack has no pack signature
- NoSuchFileException: file has gone missing
- PackMismatchException: pack no longer matches its index
- UnpackException: unpacking failed
- UnsupportedPackIndexVersionException: unsupported pack index version
- UnsupportedPackVersionException: unsupported pack version
Do not attempt to handle Errors since they are thrown for serious
problems applications should not try to recover from.
Change-Id: I2c416ce2b0e23255c4fb03a3f9a0ee237f7a484a Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Luca Milanesio [Fri, 24 Mar 2017 00:18:12 +0000 (00:18 +0000)]
Don't flag a packfile invalid if opening existing file failed
A packfile random file open operation may fail with a
FileNotFoundException even if the file exists, possibly
for the temporary lack of resources.
Instead of managing the FileNotFoundException as any generic
IOException it is best to rethrow the exception but prevent
the packfile for being flagged as invalid until it is actually
opened and read successfully or unsuccessfully.
David Ostrovsky [Thu, 23 Mar 2017 05:44:51 +0000 (06:44 +0100)]
bazel: Consume hamcrest through transitive dependency
In I3ab958ce8 explicit dependency in lib/BUILD were defined and most
of the bazel build implementation was switched to using it. Switch
test.bzl test implementation to using explicit dependencies as well.
Change-Id: I4413d1a45addeeb2a980d07669fa034c2eebb3a4 Signed-off-by: David Ostrovsky <david@ostrovsky.org>
bazel test --test_tag_filters=api,dfs,revplot,treewalk //...
Change-Id: Ic41b05a79d855212e67b1b4707e9c6b4dc9ea70d Signed-off-by: David Ostrovsky <david@ostrovsky.org> Signed-off-by: Jonathan Nieder <jrn@google.com>
Jonathan Nieder [Mon, 20 Mar 2017 01:52:55 +0000 (18:52 -0700)]
bazel: Mark junit targets testonly
Only testonly targets (such as tests) need to use junit.
In particular this involves making the toplevel :all rule testonly.
It's not clear to me what that rule is for --- "bazel build //..."
already works to build all targets. In any case it appears to be for
testing, so marking it as testonly shouldn't be harmful.
Jonathan Nieder [Mon, 20 Mar 2017 00:41:26 +0000 (17:41 -0700)]
bazel: Add explicit targets for library dependencies
This provides a place to declare visibility restrictions and
transitive dependencies for each library.
Other targets should only declare dependencies on what they directly
use, making dependencies easier to maintain.
Trim the dependencies of org.eclipse.jgit:jgit to follow that rule.
It declares dependencies on Apache httpcomponents and the servlet
API but doesn't use them.
Tested:
* 'bazel build //...' succeeds
* applying the change https://gerrit-review.googlesource.com/90843
to a copy of Gerrit, following the instructions there, and running
'bazel test //...' in that copy of Gerrit still succeeds
David Pursehouse [Sun, 19 Mar 2017 01:23:29 +0000 (10:23 +0900)]
Fix test configuration to run RacyGitTests, and fix testRacyGitDetection
With the filename suffix "Tests", the module was not included in tests
when building with Maven, and without the @Test annotations the tests
didn't get executed under Eclipse or buck test.
testRacyGitDetection was failing because the index file did not exist.
Add the missing configuration, the missing annotations, and add a call
to reset() in testRacyGitDetection to force creation of the index file.
Change-Id: I29dd8f89c36fef4ab40bedce7f4a26bd9b2390e4 Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
David Ostrovsky [Sat, 18 Mar 2017 10:29:26 +0000 (11:29 +0100)]
RevFlagSetTest: Fix compilation error flagged by error prone
This fixes error flagged by error prone:
Java compilation in rule '//org.eclipse.jgit.test:jgit' failed: Worker
process sent response with exit code: 1.
org.eclipse.jgit.test/tst/org/eclipse/jgit/revwalk/RevFlagSetTest.java:149:
error: [CollectionIncompatibleType] Argument '"bob"' should not be
passed to this method; its type String is not compatible with its
collection's type argument RevFlag
assertFalse(set.contains("bob"));
Change-Id: I4a971ce92fee55e28b2ab0c7b716ac20fa9c6709 Signed-off-by: David Ostrovsky <david@ostrovsky.org>
David Ostrovsky [Sat, 18 Mar 2017 09:41:29 +0000 (10:41 +0100)]
Move SHA1 compress/recompress files to resource folder
This fixes Bazel build:
in srcs attribute of java_library rule //org.eclipse.jgit:jgit:
file '//org.eclipse.jgit:src/org/eclipse/jgit/util/sha1/SHA1.recompress'
is misplaced here (expected .java, .srcjar or .properties).
Another option that was considered is to exclude the non source files.
Change-Id: I7083f27a4a49bf6681c85c7cf7b08a83c9a70c77 Signed-off-by: David Ostrovsky <david@ostrovsky.org>
projects / jgit.git / log