zeripath [Wed, 25 Aug 2021 22:10:15 +0000 (23:10 +0100)]
Add primary_key to issue_index (#16813) (#16820)
Backport #16813
Make the group_id a primary key in issue_index. This already has an
unique index and therefore is a good candidate for becoming a primary
key.
This PR also changes all other uses of this table to add the group_id as
the primary key.
The migration v192 from #16813 has not been backported but Xorm will
work fine with non-primary keyed tables. If a user on 1.15 wishes to
have the correct schema sooner than 1.16 - they can use gitea doctor
recreate-table issue_index and gitea will recreate the table with the
primary key.
Lunny Xiao [Wed, 25 Aug 2021 10:11:54 +0000 (18:11 +0800)]
Fix branch pagination error (#16805) (#16816)
Backport #16805
Fix #16801
Even if default branch is removed from the current page, but the total branches number should be still kept. So that the pagination calculation will be correct.
zeripath [Mon, 23 Aug 2021 23:50:04 +0000 (00:50 +0100)]
Ensure that template compilation panics are sent to the logs (#16788) (#16792)
Backport #16788
Although panics within the rendering pipeline are caught and dealt with,
panics that occur before that starts are unprotected and will kill Gitea
without being sent to the logs.
This PR adds a basic recovery handler to catch panics that occur after
the logger is initialised and ensure that they're sent to the logger.
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: techknowlogick <techknowlogick@gitea.io>
zeripath [Sat, 21 Aug 2021 02:47:37 +0000 (03:47 +0100)]
Recreate Tables should Recreate indexes on MySQL (#16718) (#16739)
The MySQL indexes are not being renamed at the same time as RENAME table despite the
CASCADE. Therefore it is probably better to just recreate the indexes instead.
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: techknowlogick <techknowlogick@gitea.io>
6543 [Fri, 13 Aug 2021 16:26:19 +0000 (18:26 +0200)]
If PatchURL is empty, skip pull patch download when migrating (Partial #16356) (#16681)
Partial backport #16356
Whilst looking at adding migration support for onedev it has become apparent that gitea would attempt to pull patches on other migration targets even if that PatchURL was empty.
6543 [Fri, 13 Aug 2021 05:51:13 +0000 (07:51 +0200)]
Fix NPE in fuzzer (#16680) (#16682)
The fuzzer found an issue with the issue pattern processor where there is a spurious
path.Clean which does not need to be there. This PR also sets the default AppURL for
the fuzzer too.
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: zeripath <art27@cantab.net>
zeripath [Mon, 9 Aug 2021 12:18:40 +0000 (13:18 +0100)]
Fix direct creation of external users on admin page (#16613)
From #16612 it was noticed that when creating new external users directly it was not
possible to set their username correctly. This PR restores this ability.
zeripath [Sun, 8 Aug 2021 10:32:07 +0000 (11:32 +0100)]
Restore compatibility with SQLServer 2008 R2 in migrations (#16638)
This fixes two problems with MSSQL:
* `ALTER TABLE DROP ... IF EXISTS ...` is only supported in SQL Server >16.
The `IF EXISTS` here is a belt-and-braces and does not need to be present. Therefore
can be dropped. Also stop attempting to drop the indexes as constraints as they're indexes!
* System tables like: `sys.indexes` should be lowercase not uppercase because of collation issues.
Fix #13615
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* BREAKING
* Upgrade to the latest version of golang-jwt and increase minimum go to 1.15 (#16590) (#16606)
* SECURITY
* Upgrade to the latest version of golang-jwt and increase minimum go to 1.15 (#16590) (#16606)
* Switch to maintained jwt lib (#16532) (#16533)
* Correctly create of git-daemon-export-ok files (#16508) (#16514)
* Don't show private user's repo in explore view (#16550) (#16554)
* API
* Swagger AccessToken fixes (#16574) (#16597)
* Set AllowedHeaders on API CORS handler (#16524) (#16618)
* BUGFIXES
* Restore Accessibility for Dropdown (#16576) (#16617)
* Pass down SignedUserName down to AccessLogger context (#16605) (#16616)
* Fix table alignment in markdown (#16596) (#16602)
* Fix 500 on first wiki page (#16586) (#16598)
* Lock goth/gothic and Re-attempt OAuth2 registration on login if registration failed at startup (#16564) (#16570)
* Upgrade levelqueue to v0.4.0 (#16560) (#16561)
* Handle too long PR titles correctly (#16517) (#16549)
* Fix data race in bleve indexer (#16474) (#16509)
* Restore CORS on git smart http protocol (#16496) (#16506)
* Fix race in log (#16490) (#16505)
* Fix prepareWikiFileName to respect existing unescaped files (#16487) (#16498)
* Make cancel from CatFileBatch and CatFileBatchCheck wait for the command to end (#16479) (#16480)
* Update notification table with only latest data (#16445) (#16469)
* Revert to use alpine 3.13 (#16451) (#16452)
* Fix crash following ldap authentication update (#16447) (#16448)
* Fix direct creation of external users on admin page (partial #16612) (#16613)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update CHANGELOG.md
zeripath [Wed, 4 Aug 2021 17:26:35 +0000 (18:26 +0100)]
Pass down SignedUserName down to AccessLogger context (#16605) (#16616)
Backport #16605
Unfortunately when the AccessLogger was moved back before the contexters the
SignedUserName reporting was lost. This is due to Request.WithContext leading to a
shallow copy of the Request and the modules/context/Context being within that request.
This PR adds a new context variable of a string pointer which is set and handled
in the contexters.
Fix #16600
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
zeripath [Wed, 4 Aug 2021 12:31:10 +0000 (13:31 +0100)]
Restore #10096/#8638 and re-fix #15172 (#16576) (#16617)
Backport #16576
This PR restores the vendored and patched dropdow from #8638. It
however, it partially abandons the call to `click()` using instead the
default dropdown click calls instead. This prevents the issue of the
dropdown grabbing focus permanently however, this may have negative
effects on the effect of focus on the dropdowns.
Of note, the behaviour of the template selector dropdown on the repo
creation page is slightly odd - I don't believe that this odd behaviour
is caused by this PR but rather by the feed source for this. I suspect
that the dropdown should be adding a delete button to its selection.
zeripath [Tue, 3 Aug 2021 22:46:08 +0000 (23:46 +0100)]
Fix 500 on first wiki page (#16586) (#16598)
Backport #16586
There is a mistake in #16319 and #16487 which means that the first time
a wiki page is created a 500 is reported because the `master` branch is
not in existence in that wiki yet.
This PR simply checks for this error and returns not found.
Lock goth/gothic and Re-attempt OAuth2 registration on login if registration failed at startup (#16570)
Backport #16564
This PR has two parts:
* Add locking to goth and gothic calls with a RWMutex
The goth and gothic calls are currently unlocked and thus are a cause of multiple potential races
* Reattempt OAuth2 registration on login if registration failed
If OAuth2 registration fails at startup we currently disable the login_source however an alternative approach could be to reattempt registration on login attempt.
Handle too long PR titles correctly (#16517) (#16549)
Backport #16517
The CompareAndPullRequestPost handler for POST to /compare
incorrectly handles returning errors to the user. For a start
it does not set the necessary markers to switch SimpleMDE
but it also does not immediately return to the form.
This PR fixes this by setting the appropriate values, fixing
the templates and preventing the suggestion of a too long
title.
One of the reasons why #16447 was needed and why #16268 was needed in
the first place was because it appears that editing ldap configuration
doesn't get tested.
This PR therefore adds a basic test that will run the edit pipeline.
In doing so it's now clear that #16447 and #16268 aren't actually
solving #16252. It turns out that what actually happens is that is that
the bytes are actually double encoded.
This PR now changes the json unmarshal wrapper to handle this double
encode.
Fix #16252
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: 6543 <6543@obermui.de>
Restore creation of git-daemon-export-ok files (#16508) (#16514)
Backport #16508
Somewhere along the line the creation of git-daemon-export-ok
files disappeared but the updating of these files when
repo visibility changes remained. The problem is that the
current state will create files even when the org or user
is private.
Update notification table with only latest data (#16445) (#16469)
When marking notifications read the results may be returned out of order
or be delayed. This PR sends a sequence number to gitea so that the
browser can ensure that only the results of the latest notification
change are shown.
Fix crash following ldap authentication update (#16447) (#16448)
Backport #16447
Unfortunately #16268 contained a terrible error, whereby there was a double
indirection taken when unmarshalling the source data. This fatally breaks
authentication configuration reading.
* Ensure that the pipes are closed in ssh.go
* Ensure that a cancellable context is passed up in cmd/* http requests
* Make cmd.fail return properly so defers are obeyed
* Ensure that something is sent to stdout in case of blocks here
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint 2
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint 3
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Fix activation of primary email addresses (#16385)
* fix: primary email cannot be activated
* Primary email should be activated together with user account when
'RegisterEmailConfirm' is enabled.
* To fix the existing error state. When 'RegisterEmailConfirm' is enabled, the
admin should have permission to modify the activations status of user email.
And the user should be allowed to send activation to primary email.
* Only judge whether email is primary from email_address table.
Add option to provide signature for a token to verify key ownership (#14054)
* Add option to provide signed token to verify key ownership
Currently we will only allow a key to be matched to a user if it matches
an activated email address. This PR provides a different mechanism - if
the user provides a signature for automatically generated token (based
on the timestamp, user creation time, user ID, username and primary
email.
* Ensure verified keys can act for all active emails for the user
* Add code to mark keys as verified
* Slight UI adjustments
* Slight UI adjustments 2
* Simplify signature verification slightly
* fix postgres test
* add api routes
* handle swapped primary-keys
* Verify the no-reply address for verified keys
* Only add email addresses that are activated to keys
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
specify user in rootless container numerically (#16361)
* specify user in rootless container numerically
With kubernetes' PodSecurityPolicy set to runAsNonRoot it will not allow starting the container. The error message is
```
Error: container has runAsNonRoot and image has non-numeric user (git), cannot verify user is non-root
```
The `USER` directive has to be numerical for that to work.
Redirect on bad CSRF instead of presenting bad page (#14937)
The current CSRF handler is a bit harsh with bad CSRF tokens on webpages
I think we can be a little kinder and redirect to base page with a flash error
projects / gitea.git / log