Enable calling of smudge filters when checking out paths
When checking out commits/branches JGit was triggering correctly
configured smudge filters. But when checking out paths (either from
index or from commits) JGit was not triggering smudge filters. Fix
CheckoutCommand to properly call filters.
Add config parameter gc.prunePackExpire for packfile expiration
JGit's Garbage Collector is repacking relevant objects into new
packfiles and is afterwards deleting the now obsolete packfiles. But to
prevent problems caused by race conditions JGit was not deleting
packfiles when they are too young. The same mechanism as for loose
objects and the config parameter gc.pruneExpire was used.
But JGit was reusing the parameter gc.pruneExpire also for packfiles
which may cause a lot of filesystem consumption if gc.pruneExpire was
set to the default of 2 weeks. Only two weeks after packfile creation gc
was allowed to delete this packfile.
This change introduces a new config paramter gc.prunePackExpire with a
default of "1.hour". This parameter is used when packfiles are deleted.
Only packfiles older than the specified time can be deleted.
For loose objects the behaviour is not changed and only the old
parameter gc.pruneExpire is relevant.
Terry Parker [Fri, 25 Mar 2016 20:55:48 +0000 (13:55 -0700)]
In TestRepository, use a consistent clock
The default author and committer objects in TestRepository were
initialized statically and did not use the MockSystemReader passed into
the TestRepository ctor. Make these fields non-static and initialize
them with a consistent clock.
Also make the author and commiter name and email strings public for
tests that want to verify against them.
Change-Id: I88b444b96e22743001b32824d8e4e03c2239aa86 Signed-off-by: Terry Parker <tparker@google.com>
With ignoreRemoteFailures set to true, we can ignore remote failures
(e.g. the branch of a project described in the manifest file does not
exist), skip that project and continue to the next one, instead of fail
the whole operation.
Change-Id: I8b3765713599e34f1411f9bbc7f575ec7c2384e0 Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
This commit introduces a FileModeStrategy to
the FileTreeIterator class. This provides a way to
allow different modes of traversing a file tree;
for example, to control whether or not a nested
.git directory should be treated as a gitlink.
Ivan Motsch [Thu, 25 Feb 2016 14:39:41 +0000 (15:39 +0100)]
Add EOL stream type detection to TreeWalk
TreeWalk provides the new method getEolStreamType. This new method can
be used with EolStreamTypeUtil in order to create a wrapped InputStream
or OutputStream when reading / writing files. The implementation
implements support for the git configuration options core.crlf, core.eol
and the .gitattributes "text", "eol" and "binary"
CQ: 10896
Bug: 486563
Change-Id: Ie4f6367afc2a6aec1de56faf95120fff0339a358 Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Fri, 4 Mar 2016 13:20:01 +0000 (14:20 +0100)]
Fix RebuildRefTree trying to add HEAD twice to RefTree
14dfa70520 fixed the problem that HEAD wasn't added to the reftree when
rebuilding the reftree in an empty repository where HEAD isn't yet
resolvable. Since non-resolvable refs are filtered out by
RefDatabase.getRefs(ALL) we have to add HEAD to the reftree explicitly
in this special case.
This fix resulted in another bug: rebuilding the reftree in a repository
which has a resolvable HEAD failed with a DirCacheNameConflictException
in RefTree.apply(). If HEAD is resolvable RefDatabase.getRefs(ALL) does
not filter out HEAD. This results in two identical CREATE commands for
HEAD which RefTree.apply() refuses to execute.
Fix this by no longer creating a duplicate CREATE command for HEAD.
See: I46cbc2611b9ae683ef7319dc46af277925dfaee5
Change-Id: I58dd6bcdef88820aa7de29761d43e2edfa18fcbe Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Ivan Motsch [Thu, 25 Feb 2016 14:39:41 +0000 (15:39 +0100)]
Tests on Windows with URIish fail
The reason is that URIish(URL) and URIish(String) make different parsing
of path / rawPath with regard to drive letters. /C:/... for URL and
C:/... for String. This patch fixes the issue.
Change-Id: I8e2013fff30b7bb198ff733c038e21366667b8a0 Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Matthias Sohn [Thu, 18 Feb 2016 22:34:03 +0000 (23:34 +0100)]
Remove unused package export from bundle org.eclipse.jgit.lfs.test
This may have caused the spurious compile errors sometimes observed in
Eclipse since org.eclipse.jgit.lfs.lib is a split package to enable
testing package private code in bundle org.eclipse.jgit.lfs.
Change-Id: I0294448965de8ad8c254b26382386ef2b9f6e863 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn [Wed, 3 Feb 2016 10:34:51 +0000 (11:34 +0100)]
Support Amazon S3 based storage for LFS
Add a storage implementation storing large objects in Amazon S3.
The AmazonS3Repository pre-signs download and upload requests.
AWS access and secret key are expected to be in the
$HOME/.aws/credentials file in the following format:
[default]
accessKey = ...
secretKey = ...
Use AWS version 4 request signing [1] because it is more secure and
supported by all regions. The version 3 signing is not supported in
newer regions.
In follow up changes we should:
- implement getVerifyAction() and do actual verification. Subclasses of
S3Repository can implement caching for object meta data (size) in order
to avoid extra roundtrips to S3. Verification should ensure that meta
data store and content of S3 storage are in sync
- HEAD request used in S3Repository.getSize() seems to always return
Content-length 0 in contrast to the documentation [2]. So getSize() does
detect if the object exists in S3 or not but in case the object exists
it always returns size 0
Change-Id: Ic47f094928a259e5264c92b3aacf6d90210907a8 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com> Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Shawn Pearce [Wed, 17 Feb 2016 00:41:51 +0000 (16:41 -0800)]
Introduce specific WantNotValidException for servers
Capture the internal "want X not valid" state as a specific subclass
of PackProtocolException, allowing this to be more easily identified
in server stack traces and wrapper application code.
Shawn Pearce [Tue, 16 Feb 2016 23:09:05 +0000 (15:09 -0800)]
smart HTTP server: Pass along "want X not valid" to client
If the client sends a SHA-1 that the server does not recognize echo
this back to the client with an explicit error message instead of
the generic "internal server error".
This was always the intent of the implementation but it was being
dropped on smart HTTP due to the UploadPackServlet catching the
PackProtocolException, discarding the buffered message UploadPack
meant to send, and sending along a generic message instead.
Matthias Sohn [Mon, 15 Feb 2016 22:27:28 +0000 (23:27 +0100)]
Merge branch 'stable-4.2'
* stable-4.2:
Don't use deprecated LockFile constructor
Fix warnings about unchecked conversion of MergeResult
MockServletConfig: Fix warning about unchecked conversion of Enumeration
HugeFileTest: Make Git a class member and open in try-with-resource
Suppress "unchecked cast" warnings related to UploadPackFactory.DISABLED
DiffAlgorithms: Fix warnings about variable hiding
DirCacheBasicTest: Open ObjectInserter.Formatter in try-with-resource
DirCacheBuilderIteratorTest: Open TreeWalk in try-with-resource
DirCacheCGitCompatabilityTest: Open TreeWalk in try-with-resource
DirCacheCheckoutMaliciousPathTest: Open Git and RevWalk in t-w-r
DirCacheIteratorTest: Open TreeWalk instances in try-with-resource
ForPathTest: Open TreeWalk in try-with-resource
GitConstructionTest: Open Git instance in try-with-resource
IndexDiffTest: Open Git instances in try-with-resources
ManifestParserTest: Don't use deprecated StringBufferInputStream
InMemoryRepository: Remove unused RevWalk from batch method signature
IndexModificationTimesTest: Open Git instances in try-with-resource
InterIndexDiffFilterTest: Open TreeWalk in try-with-resource
LockFileTest: Open Git instance in try-with-resource
JGit v4.1.2.201602141800-r
MergeCommandTest: Use JUnit's assume to check preconditions
MergeCommandTest: Open Git instances in try-with-resource
Change-Id: Ie5dba6b9132a29e86958a04fa2b76465bcd2c6b5 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
David Pursehouse [Mon, 15 Feb 2016 08:41:05 +0000 (17:41 +0900)]
HugeFileTest: Make Git a class member and open in try-with-resource
There's only one test method in this module and it's quite long, so
rather than using a try-with-resource and having to indent a huge
block of existing code, make the Git a member variable that gets
initialised and closed in @Before and @After annotated methods.
The methods are named 'before' and 'after' rather than the conventional
'setUp' and 'tearDown' so as not to conflict with the names of the
existing methods in LocalDiskRepositoryTestCase.
Change-Id: I5a4a9b59f244c450dbcae9fdde7d9e0f0cd24e6f Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
David Pursehouse [Mon, 15 Feb 2016 05:57:39 +0000 (14:57 +0900)]
InMemoryRepository: Remove unused RevWalk from batch method signature
The RevWalk given in the arguments is not used. According to the
comment at the top of the method, a new RevWalk is intentionally
used in the implementation.
Remove the unused argument.
Change-Id: Iec81a1341d5bf377801475845b96a465753096ef Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
David Ostrovsky [Sun, 14 Feb 2016 10:36:25 +0000 (11:36 +0100)]
Buck: Simplify root build file
Remove all proxy rules, that were introduced to allow to build Gerrit
with hijacked JGit cell. New approach suggested in: [1], that emulates
real JGit project structure in its own cell, makes them unnecessary.
Add :all rule, that build all artifacts and packages them in zip file.
Add shell binary :jgit_bin rule, that allows to execute JGit binary
from with buck run command, e.g.:
$ buck run jgit_bin status
$ buck run jgit_bin -- --version
Matthias Sohn [Fri, 12 Feb 2016 10:15:19 +0000 (11:15 +0100)]
Merge branch 'stable-4.2'
* stable-4.2:
NoteMapTest: Open TreeWalk instances in try-with-resource
ObjectDirectoryTest: Fix warnings about variable hiding
PackWriterTest: Open RevWalk in try-with-resource
PatchIdDiffFormatterTest: Open Git and PatchIdDiffFormatter in try-with-resource
PathSuffixFilterTest: Open TreeWalk in try-with-resource
PostOrderTreeWalkTest: Open TreeWalk in try-with-resource
PullCommandWithRebaseTest: Open RevWalk in try-with-resource
PushCommandTest: Open Git instances in try-with-resource
RacyGitTests: Open NameConflictTreeWalk in try-with-resource
RecursiveMergerTest: Open TreeWalk and BufferedReader in try-with-resource
ReflogConfigTest: refactor commit method to avoid variable hiding
Update .mailmap
RefDirectoryTest: Fix warning about member variable hiding
ReflogResolveTest: Open Git instances in try-with-resource
ReflogTest: Open Git instances in try-with-resource
RepoCommandTest: Open Git instances in try-with-resource
Change-Id: I7964b699396629e31a9cc5600aedcf4be4e659a8 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
David Pursehouse [Fri, 12 Feb 2016 05:41:44 +0000 (14:41 +0900)]
MergeCommandTest: Use JUnit's assume to check preconditions
Using the assume method, instead of just returning, will cause the
test to be marked as skipped rather than passed on systems where
the precondition is not satisfied.
Change-Id: I13672371f6cd3c481a0a6247e0eaed3aac6d766e Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
David Pursehouse [Fri, 12 Feb 2016 04:43:56 +0000 (13:43 +0900)]
ReflogConfigTest: refactor commit method to avoid variable hiding
The author and committer parameters were hiding class members of
the same name.
Since the passed in PersonIdent instances were being created from
the class members anyway, remove the parameters and instead create
the PersonIdent instances inline in the method.
Change-Id: I66b057df388835d57f332fdcbadb8a9f4e1094a4 Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Ivan Motsch [Tue, 17 Nov 2015 15:04:01 +0000 (16:04 +0100)]
Add Attribute Macro Expansion
Attributes MacroExpander implements macros used in git attributes. This
is implemented inside the TreeWalk using a lazy created MacroExpander.
In addition, the macro expander caches the global and info attributes
node in order to provide fast merge of attributes.
Change-Id: I2e69c9fc84e9d7fb8df0a05817d688fc456d8f00 Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Matthias Sohn [Tue, 9 Feb 2016 23:50:41 +0000 (00:50 +0100)]
Merge branch 'stable-4.2'
* stable-4.2:
RepoProject: Fix warnings about variable hiding
RepoTest: Open Git in try-with-resources
RepositoryResolveTest: Open Git in try-with-resource
RepositoryTestCase: Open autocloseable types in try-with-resource
ResetCommandTest: Use Git member in testHardResetAfterSquashMerge
ResolveMergerTest: Open Git in try-with-resource
RevCommitListTest: Open Git and RevWalk in try-with-resource
RevCommitParseTest: Open ObjectInserter.Formatter in try-with-resource
RevObjectTest: Open RevWalk in try-with-resource
RevTagParseTest: Open ObjectInserter.Formatter in try-with-resource
RevertCommandTest: Open Git in try-with-resource
SquashMessageFormatterTest: Open git in try-with-resource
StatusCommandTest: Open Git in try-with-resource
SubmoduleAddTest: Open Git in try-with-resource
SymlinksTest: Open git and TreeWalk in try-with-resource
T0003_BasicTest: Open autocloseable types in try-with-resource
TextHashFunctions: Fix warnings about variable hiding
TreeFilterTest: Open TreeWalk in try-with-resource
TreeWalkJava7Test: Open TreeWalk in try-with-resource
Fix diff for added and removed submodule
Change-Id: If3ecc63f6dfac55474d3c1dd2f4105371f3d24fb Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
projects / jgit.git / log