Marc Strapetz [Thu, 19 Aug 2010 13:34:44 +0000 (15:34 +0200)]
Fix parsing of multiple authors in PersonIdent.
PersonIdent should be parsable for an invalid commit which
contains multiple authors, like "A <a@a.org>, B <b@b.org>".
PersonIdent(String) constructor now delegates to
RawParseUtils.parsePersonIdent().
Shawn O. Pearce [Thu, 26 Aug 2010 00:05:31 +0000 (17:05 -0700)]
Increase the default streaming threshold to 15 MiB
Applying deltas in the large streaming mode is horrifically slow.
Trying to pack icu4c is impossible because a single 11 MiB file
sits on top of a 15 MiB file though a 10 deep delta chain, which
results in this very slow inflate process.
Upping the default limit to 15 MiB lets us process this large in a
reasonable time, but its still sufficiently low enough to prevent
exploding the heap of a very large process like Eclipse or Gerrit
Code Review.
We have to revisit the streaming delta application process and do
something much smarter, like flatten the delta chain before we apply
it to the base. But even that is ugly, I've seen a 155 MiB delta
sitting on top of a 450 MiB file to produce a 300 MiB result object.
If the chain is deep, we may have trouble flatting it down.
Change-Id: If5a0dcbf9d14ea683d75546f104b09bb8cd8fdbb Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 25 Aug 2010 23:46:43 +0000 (16:46 -0700)]
Fix reuse from pack file for REF_DELTA types
We miscomputed the CRC32 checksum for a REF_DELTA type of object, by
not including the full 20 byte ObjectId of the delta base in the CRC
code we use when the delta is too large to go through our two faster
small reuse code paths. This resulted in a corruption error during
packing, where the PackFile erroneously suspected the data was wrong
on the local filesystem and aborted writing, because the CRC didn't
match what we had read from the index.
Change-Id: I7d12cdaeaf2c83ddc11223ce0108d9bd6886e025 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 25 Aug 2010 00:35:52 +0000 (17:35 -0700)]
Support parsing git describe style output
We now match on the -gABBREV style output created by git describe
when its describing a non-tagged commit, and resolve that back to
the full ObjectId using the abbreviation resolution feature that
we already support.
Change-Id: Ib3033f9483d9e1c66c8bb721ff48d4485bcdaef1 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 23:26:40 +0000 (16:26 -0700)]
Throw AmbiguousObjectException during resolve if its ambiguous
Its wrong to return null if we are resolving an abbreviation and we
have proven it matches more than one object. We know how to resolve
it if we had more nybbles, as there are two or more objects with the
same prefix. Declare that to the caller quite clearly by giving them
an AmbiguousObjectException.
Change-Id: I01bb48e587e6d001b93da8575c2c81af3eda5a32 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 22:50:36 +0000 (15:50 -0700)]
Complete an abbreviation when formatting a patch
If we are given a DiffEntry header that already has abbreviated
ObjectIds on it, we may still be able to resolve those locally and
output the difference. Try to do that through the new resolve API
on ObjectReader.
Change-Id: I0766aa5444b7b8fff73620290f8c9f54adc0be96 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 19:50:59 +0000 (12:50 -0700)]
Use limited getCachedBytes in RevWalk
Parsing is rewritten to use the size limited form of getCachedBytes,
thus freeing the revwalk infrastructure from needing to care about
a large object vs. a small object when it gets an ObjectLoader.
Right now we hardcode our upper bound for a commit or annotated
tag to be 15 MiB. I don't know of any that is more than 1 MiB in
the wild, so going 15x that should give us some reasonable headroom.
Change-Id: If296c211d8b257d76e44908504e71dd9ba70ffa8 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 19:46:56 +0000 (12:46 -0700)]
Add brute force byte array loading to ObjectLoader
Some algorithms are coded in a way that requires us to provide them
the entire object contents as a contiguous byte array. The parsers
in RevCommit and RevTag, or our RawText objects are really good
examples of these.
Instead of duplicating this logic everywhere, lets put it into the
base ObjectLoader type. That way the caller only needs to give us
their upper size bound, and we'll do the rest of the heavy work to
figure out if the object still fits within that bound, and get them
an array that has the complete contents.
Change-Id: Id95a7f79d2b97e39f6949370ccca2f2c9cfb1a0f Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Shawn O. Pearce [Tue, 24 Aug 2010 23:11:41 +0000 (16:11 -0700)]
Add ObjectId to the LargeObjectException
A chunk of code that throws LargeObjectException may or may not have
the specific ObjectId on hand when its thrown. If it does, we want
to cache it in the exception, and put that in the message. If it is
missing we want to be able to set it later from a higher level stack
frame that does have the object handy.
Change-Id: Ife25546158868bdfa886037e4493ef8235ebe4b9 Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Shawn O. Pearce [Tue, 24 Aug 2010 19:59:10 +0000 (12:59 -0700)]
Don't copy more than the object size
If the loader's stream is broken and returns to us more content
than it originally declared as the size of the object, don't
copy that onto the output stream. Instead throw EOFException
and abort fast. This way we don't follow an infinite stream,
but instead will at least stop when the size was reached.
Change-Id: I7ec0c470c875f03b1f12a74a9b4d2f6e73b659bb Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 19:56:47 +0000 (12:56 -0700)]
Use the ObjectStream size during copyTo
If the stream is a delta decompression stream, getting the size
can be expensive. Its cheaper to get it from the stream itself
rather than from the object loader.
Change-Id: Ia7f0af98681f6d56ea419a48c6fa8eea09274b28 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 25 Aug 2010 00:20:50 +0000 (17:20 -0700)]
Fix ObjectDirectory abbreviation resolution to notice new packs
If we can't resolve an abbreviation, it might be because there is
a new pack file we haven't picked up yet. Try scanning the packs
again and recheck each pack if there were differences from the last
scan we did.
Because of this, we don't have to open a pack during the test where
we generate a pack on the fly. We'll miss on the first loop during
which the PackList is the NO_PACKS magic initialization constant,
and pick up the newly created index during this retry logic.
Change-Id: I7b97efb29a695ee60c90818be380f7ea23ad13a3 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 22:53:11 +0000 (15:53 -0700)]
Fully implement SHA-1 abbreviations
ObjectReader implementations are now responsible for creating the
unique abbreviation of an ObjectId, or for resolving an abbreviation
back to its full form. In this latter case the reader can offer up
multiple candidates to the caller, who may be able to disambiguate
them based on context.
Repository.resolve() doesn't take multiple candidates into account
right now, but it could in the future by looking for a remaining
^0 or ^{commit} suffix and take an expansion if there is only one
commit that matches the input abbreviation. It could also use
the distance from an annotated tag to resolve "tag-NNN-gcommit"
style strings that are often output by `git describe`.
Change-Id: Icd3250adc8177ae05278b858933afdca0cbbdb56 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 17:30:58 +0000 (10:30 -0700)]
Add openEntryStream to WorkingTreeIterator
This makes it easier for abstract tools like AddCommand to open the
file from the working tree, without knowing internal details about
how the tree is managed.
Change-Id: Ie64a552f07895d67506fbffb3ecf1c1be8a7b407 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 17:29:50 +0000 (10:29 -0700)]
Add setLength(long) to DirCacheEntry
Applications should favor the long style interface, especially when
their source input is a long type, e.g. coming from java.io.File.
This way when the index format is later changed to support a
larger file size than 2 GiB we can handle it by just changing the
entry code, and not need to fix a lot of applications.
Change-Id: I332563caeb110014e2d544dc33050ce67ae9e897 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 17:13:25 +0000 (10:13 -0700)]
Move commit and tag formatting to CommitBuilder, TagBuilder
These objects should be responsible for their own formatting,
rather than delegating it to some obtuse type called ObjectInserter.
While we are at it, simplify the way we insert these into a database.
Passing in the type and calling format in application code turned
out to be a huge mistake in terms of ease-of-use of the insert API.
Change-Id: Id5bb95ee56aa2a002243e9b7853b84ec8df1d7bf Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 16:46:14 +0000 (09:46 -0700)]
Rename Commit, Tag to CommitBuilder, TagBuilder
Since these types no longer support reading, calling them a Builder
is a better description of what they do. They help the caller to
build a commit or a tag object.
Change-Id: I53cae5a800a66ea1721b0fe5e702599df31da05d Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 16:40:41 +0000 (09:40 -0700)]
Add documentation explaining how to read Commit and Tag
Since we stopped supporting these types for reading, but their
name is a natural candidate for someone to try and use in code,
explain where they should be looking instead.
Change-Id: I091a1b0ef71b842016020f938ba3161431aab9c9 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Marc Strapetz [Thu, 29 Jul 2010 14:21:37 +0000 (16:21 +0200)]
Perform automatic CRLF to LF conversion during WorkingTreeIterator
WorkingTreeIterator now optionally performs CRLF to LF conversion for
text files. A basic framework is left in place to support enabling
(or disabling) this feature based on gitattributes, and also to
support the more generic smudge/clean filter system. As there is
no gitattribute support yet in JGit this is left unimplemented,
but the mightNeedCleaning(), isBinary() and filterClean() methods
will provide reasonable places to plug that into in the future.
[sp: All bugs inside of WorkingTreeIterator are my fault, I wrote
most of it while cherry-picking this patch and building it on
top of Marc's original work.]
Shawn O. Pearce [Wed, 4 Aug 2010 00:40:01 +0000 (17:40 -0700)]
Expose pack fetch/push connections for subclassing
These classes need to be visible if an application wants to define
its own native pack based protocol embedded within another layer,
much like we already support for smart HTTP.
Change-Id: I7e2ac3ad01d15b94d340128a395fe0b2f560ff35 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 3 Aug 2010 00:00:35 +0000 (17:00 -0700)]
Allow ObjectReuseAsIs to have more control over write ordering
The reuse system used by an object database may be able to benefit
from knowing what objects are coming next, and even improve data
throughput by delaying (or moving up) objects that are stored near
each other in the source database.
Pushing the iteration down into the reuse code makes it possible
for a smarter implementation to aggregate reuse. But for the
standard pack file format on disk we don't bother, its quite
efficient already.
Change-Id: I64f0048ca7071a8b44950d6c2a5dfbca3be6bba6 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 2 Aug 2010 19:26:01 +0000 (12:26 -0700)]
Allow ObjectToPack subclasses to use up to 4 bits of flags
Some instances may benefit from having access to memory efficient
storage for some small values, like single flag bits. Give up a
portion of our delta depth field to make 4 bits available to any
subclass that wants it.
This still gives us room for delta chains of 1,048,576 objects,
and that is just insane. Unpacking 1 million objects to get to
something is longer than most users are willing to wait for data
from Git.
Change-Id: If17ea598dc0ddbde63d69a6fcec0668106569125 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 1 Aug 2010 03:08:10 +0000 (20:08 -0700)]
Implement async/batch lookup of object data
An ObjectReader implementation may be very slow for a single object,
but yet support bulk queries efficiently by batching multiple small
requests into a single larger request. This easily happens when the
reader is built on top of a database that is stored on another host,
as the network round-trip time starts to dominate the operation cost.
RevWalk, ObjectWalk, UploadPack and PackWriter are the first major
users of this new bulk interface, with the goal being to support an
efficient way to pack a repository for a fetch/clone client when the
source repository is stored in a high-latency storage system.
Processing the want/have lists is now done in bulk, to remove
the high costs associated with common ancestor negotiation.
PackWriter already performs object reuse selection in bulk, but it
now can also do the object size lookup and object counting phases
with higher efficiency. Actual object reuse, deltification, and
final output are still doing sequential lookups, making them a bit
more expensive to perform.
Change-Id: I4c966f84917482598012074c370b9831451404ee Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
By giving the reader information about the roots of a revision
traversal, some readers may be able to prefetch information from
their backing store using background threads in order to reduce
data access latency. However this isn't typically necessary so
the default reader implementation doesn't react to the advice.
Change-Id: I72c6cbd05cff7d8506826015f50d9f57d5cda77e Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ObjectReader implementations may wish to use multiple threads in
order to evaluate object reuse faster. Let the reader make that
decision by passing the iteration down into the reader.
Because the work is pushed into the reader, it may need to locate a
given ObjectToPack given its ObjectId. This can easily occur if the
reader has sent a list of ObjectIds to the object database and gets
back information keyed only by ObjectId, without the ObjectToPack
handle. Expose lookup using the PackWriter's own internal map,
so the reader doesn't need to build a redundant copy to track the
assocation of ObjectId back to ObjectToPack.
Change-Id: I0c536405a55034881fb5db92a2d2a99534faed34 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 2 Aug 2010 17:17:21 +0000 (10:17 -0700)]
Flush the pack header as soon as its ready
When the output stream is deeply buffered (e.g. 1 MiB or more in
an HTTP servlet on some containers) trying to kick out the header
earlier will prevent the client from stalling hard while the first
1 MiB is received and it can process the pack header. Forcing a
flush here lets the client see the header and start its progress
monitor for "Receiving objects: (1/N)" so the user knows there
is still activity occurring, even though the buffering may cause
there to be some lag as the buffer fills up on the sending side.
Change-Id: I3edf39e8f703fe87a738dc236d426b194db85e3a Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Storage implementations may find this useful when implementing the
ObjectReuseAsIs interface on their ObjectReader. Expose it so we
don't force them to create a redundant copy of the information.
Change-Id: I802ec8113c00884fccde5d0e92b9849716316f62 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 20 Aug 2010 22:41:49 +0000 (15:41 -0700)]
Add a public RevTag.parse() method
Callers might have a canonical tag encoding on hand that they
wish to convert into a clean structure for presentation purposes,
and the object may not be available in a repository. (E.g. maybe
its a "draft" tag being written in an editor.)
Change-Id: I387a462afb70754aa7ee20891e6c0262438fdf32 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 20 Aug 2010 16:32:07 +0000 (09:32 -0700)]
Add a public RevCommit.parse() method
Callers might have a canonical commit encoding on hand that they
wish to convert into a clean structure for presentation purposes,
and the object may not be available in a repository. (E.g. maybe
its a "draft" commit being written in an editor.)
Change-Id: I21759cff337cbbb34dbdde91aec5aa4448a1ef37 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 20 Aug 2010 22:18:25 +0000 (15:18 -0700)]
Make Tag class only for writing
The Tag class now only supports the creation of an annotated tag
object. To read an annotated tag, applictions should use RevTag.
This permits us to have exactly one implementation, and RevTag's
is faster and more bug-free.
Change-Id: Ib573f7e15f36855112815269385c21dea532e2cf Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 20 Aug 2010 15:53:46 +0000 (08:53 -0700)]
Make Commit class only for writing
The Commit class now only supports the creation of a commit object.
To read a commit, applictions should use RevCommit. This permits
us to have exactly one implementation, and RevCommit's is faster
and more bug-free.
Change-Id: Ib573f7e15f36855112815269385c21dea532e2cf Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 20 Aug 2010 22:42:52 +0000 (15:42 -0700)]
Correct PersonIdent hashCode() and equals() to ignore milliseconds
Git doesn't store millisecond accuracy in person identity lines,
so a line that we create in Java and round-trip through a Git object
wouldn't compare as being equal. Truncate to seconds when comparing
values to ensure the same identity is equal.
Change-Id: Ie4ebde64061f52c612714e89ad34de8ac2694b07 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 20 Aug 2010 16:25:47 +0000 (09:25 -0700)]
Try really hard to load a commit or tag
When we need the canonical form of a commit or a tag in order to
parse it into our RevCommit or RevTag fields, we really need it as a
single contiguous byte array. However the ObjectDatabase may choose
to give us a large loader. In general commits or tags are always
under the several MiB limit, so even if the loader calls it "large"
we should still be able to afford the JVM heap memory required to
get a single byte array. Coerce even large loaders into a single
byte array anyway.
Change-Id: I04efbaa7b31c5f4b0a68fc074821930b1132cfcf Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ReadTreeTests relied on Repository.getIndex() which on
platforms which coarse FileSystemTimers failed to detect
index modifications. By explicitly reloading and writing
the index this problem is solved.
Change-Id: I0a98babfc2068a3b6b7d2257834988e1154f5b26 Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Shawn O. Pearce [Thu, 19 Aug 2010 18:50:20 +0000 (11:50 -0700)]
Make ObjectId.compareTo final
Since equals() is now final and does not permit being overridden,
we should do the same thing with compareTo() to prevent different
subclasses from having different ordering behaviors. This could
lead to the same mess that we had with different equals() behaviors.
Change-Id: I35a849b6efccee5fe74cc5788a3566a1516004b7 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 19 Aug 2010 18:46:22 +0000 (11:46 -0700)]
Make ObjectId.hashCode final too
Since equals() is now final and does not permit being overridden,
we should do the same thing with hashCode() to prevent different
subclasses from having different hashing behaviors. This could
lead to the same mess that we had with different equals() behaviors.
Change-Id: I35a849b6efccee5fe74cc5788a3566a1516004b7 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 19 Aug 2010 18:43:39 +0000 (11:43 -0700)]
Remove unnecessary ObjectId.copy() calls
When RevObject overrode equals() to provide only reference equality
we used to need to convert a RevObject into an ObjectId by copy()
just to use standard Java tools like JUnit assertEquals(), or to
use contains() or get() on standard java.util collection types.
Now that we have removed this override and made ObjectId's equals()
final (preventing any of this mess in the future), some copy()
calls are unnecessary. Anytime the value is being used as an input
to a lookup routine, or to an equals, we can avoid the copy().
However we still want to use copy() anytime we are given an ObjectId
that may exist long-term, where we don't want the high cost of the
additional storage from a RevCommit extension. So we can't remove
all uses of copy(), just some of them.
Change-Id: Ief275dace435c0ddfa362ac8e5d93558bc7e9fc3 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The MergeResult class is enhanced to report more data about a
three-way merge. Information about conflicts and the base, ours,
theirs commits can be retrived.
Change-Id: Iaaf41a1f4002b8fe3ddfa62dc73c787f363460c2 Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Chris Aniszczyk [Thu, 19 Aug 2010 01:56:27 +0000 (20:56 -0500)]
Remove getter and setter for author in Tag
There was a duplicated getter and setter for tagger in Tag.
There's no needed to have two getters and setters that represent
the same things. The appropriate tests were updated also.
Change-Id: If46dc00c4c0f31ea4234c6d3bda3c03e6ebbafac Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
indexState() encodes the complete state of the index
into one readable String. This helps to write tests
against the index. indexState() is enhanced to optionally
also contain the content of the files in the index.
Change-Id: Ie988f93768d864f4cbd55809a786bd5759fc24a5 Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Added a utility method to set the reset an index to match exactly
some content in the filesystem. This can be used by tests to prepare
commits in the working-tree and set the index in one shot.
[sp: Cleaned up formatting, added getEntryFile(), released inserter.]
Change-Id: If38b1f7cacaaf769f51b14541c5da0c1e24568a5 Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a convenience API in FileRepository to pass in a String that
points to the GIT_DIR location. This is converted to a File and
sent through the usual constructor.
Matthias Sohn [Mon, 16 Aug 2010 15:42:41 +0000 (17:42 +0200)]
Set default file encoding used for JGit tests to UTF-8
This patch fixes the problem that JGit tests run from Maven fail on
Mac OS X [1]. In Eclipse the tests succeed since we set Eclipse
workspace encoding to UTF-8 via "Preferences > General > Workspace
> Text file encoding", checked via JConsole that this setting changes
the JVM system property of the test run. This change copies this
setting to the Maven test environment so that we get consistent test
results on all platforms.
Matthias Sohn [Sun, 15 Aug 2010 21:12:58 +0000 (23:12 +0200)]
Backout RevObject's object-identity based equals implementation
This restores the transitivity and symmetry properties of the equals
methods on the AnyObjectId type hierarchy as defined in [1].
Following [2] we declare these equals methods final to ensure that
semantics of equals are consistent across AnyObjectId's type hierarchy.
Shawn O. Pearce [Fri, 6 Aug 2010 16:33:55 +0000 (09:33 -0700)]
Fix ArrayIndexOutOfBounds on non-square exact rename matrix
If the exact rename matrix for a particular ObjectId isn't square we
crashed with an ArrayIndexOutOfBoundsException because the matrix
entries were encoded backwards. The encode function accepts the
source (aka deleted) index first, not second. Add a unit test to
cover this non-square case to ensure we don't have this regression
in the future.
Change-Id: I5b005e5093e1f00de2e3ec104e27ab6820203566 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* changes:
Enable configuration of non-standard pack settings
Pass PackConfig down to PackWriter when packing
Simplify UploadPack use of options during writing
Move PackWriter configuration to PackConfig
Allow PackWriter callers to manage the thread pool
Rename getOldName,getNewName to getOldPath,getNewPath
TreeWalk calls this value "path", while "name" is the stuff after the
last slash. FileHeader should do the same thing to be consistent.
Rename getOldName to getOldPath and getNewName to getNewPath.
Bug: 318526
Change-Id: Ib2e372ad4426402d37939b48d8f233154cc637da Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff Schumacher [Tue, 3 Aug 2010 23:59:30 +0000 (16:59 -0700)]
Fixed bug in scoring mechanism for rename detection
A bug in rename detection would cause file scores to be wrong. The
bug was due to the way rename detection would judge the similarity
between files. If file A has three lines containing 'foo', and file
B has 5 lines containing 'foo', the rename detection phase should
record that A and B have three lines in common (the minimum of the
number of times that line appears in both files). Instead, it would
choose the the number of times the line appeared in the destination
file, in this case file B. I fixed the bug by having the
SimilarityIndex instead choose the minimum number, as it should. I
also added a test case to verify that the bug had been fixed.
An utility method which was in RacyGitTests has been moved to
RepositoryTestCase. Also the javadoc has been improved.
This method allows to wait long enough until the
filesystem-timer has advanced. This is useful when it has to
be guaranteed that two files modifications have different
modification timestamps.
Change-Id: I2ebd7cd7818feba6acffb3f835101d8fd281bd5a Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The indexState() method was enhanced to be more configurable. A bitmask
controls which of the optional parts are reported. All data about
the worktree is not reported anymore by this method which makes the
interface more cleaner for users wanting to test only the state of the
index.
This was done because the previous version reported always so much
additional data that it was hard to write good assertions against it.
Change-Id: I9b481e97f8fcf3fcdbb785b801dc07bfa85dcc33 Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Stefan Lay <stefan.lay@sap.com>
projects / jgit.git / log