From 0a98a664c61f9a24b02784cd3ecc7e4a74fee700 Mon Sep 17 00:00:00 2001 From: Soeren Grunewald Date: Tue, 8 Jul 2014 17:17:16 +0200 Subject: [PATCH] distrib: Highlight C/C++ header files by default We already highlight C/C++ source files with the default configuration, so we should do this also for header files. Signed-off-by: Soeren Grunewald --- src/main/distrib/data/gitblit.properties | 3866 +++++++++++----------- 1 file changed, 1933 insertions(+), 1933 deletions(-) diff --git a/src/main/distrib/data/gitblit.properties b/src/main/distrib/data/gitblit.properties index 483ed6d7..f8d6c6d0 100644 --- a/src/main/distrib/data/gitblit.properties +++ b/src/main/distrib/data/gitblit.properties @@ -1,1933 +1,1933 @@ -# -# Gitblit Settings -# - -# This settings file supports parameterization from the command-line for the -# following command-line parameters: -# -# --baseFolder ${baseFolder} SINCE 1.2.1 -# -# Settings that support ${baseFolder} parameter substitution are indicated with the -# BASEFOLDER attribute. If the --baseFolder argument is unspecified, ${baseFolder} -# and it's trailing / will be discarded from the setting value leaving a relative -# path that is equivalent to pre-1.2.1 releases. -# -# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified -# -# Git Servlet Settings -# - -# Base folder for repositories. -# This folder may contain bare and non-bare repositories but Gitblit will only -# allow you to push to bare repositories. -# Use forward slashes even on Windows!! -# e.g. c:/gitrepos -# -# SINCE 0.5.0 -# RESTART REQUIRED -# BASEFOLDER -git.repositoriesFolder = ${baseFolder}/git - -# Build the available repository list at startup and cache this list for reuse. -# This reduces disk io when presenting the repositories page, responding to rpcs, -# etc, but it means that Gitblit will not automatically identify repositories -# added or deleted by external tools. -# -# For this case you can use curl, wget, etc to issue an rpc request to clear the -# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE) -# -# SINCE 1.1.0 -git.cacheRepositoryList = true - -# Search the repositories folder subfolders for other repositories. -# Repositories MAY NOT be nested (i.e. one repository within another) -# but they may be grouped together in subfolders. -# e.g. c:/gitrepos/libraries/mylibrary.git -# c:/gitrepos/libraries/myotherlibrary.git -# -# SINCE 0.5.0 -git.searchRepositoriesSubfolders = true - -# Maximum number of folders to recurse into when searching for repositories. -# The default value, -1, disables depth limits. -# -# SINCE 1.1.0 -git.searchRecursionDepth = -1 - -# List of regex exclusion patterns to match against folders found in -# *git.repositoriesFolder*. -# Use forward slashes even on Windows!! -# e.g. test/jgit\.git -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.1.0 -git.searchExclusions = - -# List of regex url patterns for extracting a repository name when locating -# submodules. -# e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract -# *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git* -# If no matches are found then the submodule repository name is assumed to be -# whatever trails the last / character. (e.g. gitblit.git). -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.1.0 -git.submoduleUrlPatterns = .*?://github.com/(.*) - -# Specify the interface for Git Daemon to bind it's service. -# You may specify an ip or an empty value to bind to all interfaces. -# Specifying localhost will result in Gitblit ONLY listening to requests to -# localhost. -# -# SINCE 1.3.0 -# RESTART REQUIRED -git.daemonBindInterface = - -# port for serving the Git Daemon service. <= 0 disables this service. -# On Unix/Linux systems, ports < 1024 require root permissions. -# Recommended value: 9418 -# -# SINCE 1.3.0 -# RESTART REQUIRED -git.daemonPort = 9418 - -# The port for serving the SSH service. <= 0 disables this service. -# On Unix/Linux systems, ports < 1024 require root permissions. -# Recommended value: 29418 -# -# SINCE 1.5.0 -# RESTART REQUIRED -git.sshPort = 29418 - -# Specify the interface for the SSH daemon to bind its service. -# You may specify an ip or an empty value to bind to all interfaces. -# Specifying localhost will result in Gitblit ONLY listening to requests to -# localhost. -# -# SINCE 1.5.0 -# RESTART REQUIRED -git.sshBindInterface = - -# Specify the SSH key manager to use for retrieving, storing, and removing -# SSH keys. -# -# Valid key managers are: -# com.gitblit.transport.ssh.FileKeyManager -# -# SINCE 1.5.0 -git.sshKeysManager = com.gitblit.transport.ssh.FileKeyManager - -# Directory for storing user SSH keys when using the FileKeyManager. -# -# SINCE 1.5.0 -git.sshKeysFolder= ${baseFolder}/ssh - -# SSH backend NIO2|MINA. -# -# The Apache Mina project recommends using the NIO2 backend. -# -# SINCE 1.5.0 -git.sshBackend = NIO2 - -# Number of threads used to parse a command line submitted by a client over SSH -# for execution, create the internal data structures used by that command, -# and schedule it for execution on another thread. -# -# SINCE 1.5.0 -git.sshCommandStartThreads = 2 - - -# Allow push/pull over http/https with JGit servlet. -# If you do NOT want to allow Git clients to clone/push to Gitblit set this -# to false. You might want to do this if you are only using ssh:// or git://. -# If you set this false, consider changing the *web.otherUrls* setting to -# indicate your clone/push urls. -# -# SINCE 0.5.0 -git.enableGitServlet = true - -# If you want to restrict all git servlet access to those with valid X509 client -# certificates then set this value to true. -# -# SINCE 1.2.0 -git.requiresClientCertificate = false - -# Enforce date checks on client certificates to ensure that they are not being -# used prematurely and that they have not expired. -# -# SINCE 1.2.0 -git.enforceCertificateValidity = true - -# List of OIDs to extract from a client certificate DN to map a certificate to -# an account username. -# -# e.g. git.certificateUsernameOIDs = CN -# e.g. git.certificateUsernameOIDs = FirstName LastName -# -# SPACE-DELIMITED -# SINCE 1.2.0 -git.certificateUsernameOIDs = CN - -# Only serve/display bare repositories. -# If there are non-bare repositories in git.repositoriesFolder and this setting -# is true, they will be excluded from the ui. -# -# SINCE 0.9.0 -git.onlyAccessBareRepositories = false - - -# Specify the list of acceptable transports for pushes. -# If this setting is empty, all transports are acceptable. -# -# Valid choices are: GIT HTTP HTTPS SSH -# -# SINCE 1.5.0 -# SPACE-DELIMITED -git.acceptedPushTransports = HTTP HTTPS SSH - -# Allow an authenticated user to create a destination repository on a push if -# the repository does not already exist. -# -# Administrator accounts can create a repository in any project. -# These repositories are created with the default access restriction and authorization -# control values. The pushing account is set as the owner. -# -# Non-administrator accounts with the CREATE role may create personal repositories. -# These repositories are created as VIEW restricted for NAMED users. -# The pushing account is set as the owner. -# -# SINCE 1.2.0 -git.allowCreateOnPush = true - -# Global setting to control anonymous pushes. -# -# This setting allows/rejects anonymous pushes at the level of the receive pack. -# This trumps all repository config settings. While anonymous pushes are convenient -# on your own box when you are a lone developer, they are not recommended for -# any multi-user installation where accountability is required. Since Gitblit -# tracks pushes and user accounts, allowing anonymous pushes compromises that -# information. -# -# SINCE 1.4.0 -git.allowAnonymousPushes = false - -# The default access restriction for new repositories. -# Valid values are NONE, PUSH, CLONE, VIEW -# NONE = anonymous view, clone, & push -# PUSH = anonymous view & clone and authenticated push -# CLONE = anonymous view, authenticated clone & push -# VIEW = authenticated view, clone, & push -# -# SINCE 1.0.0 -git.defaultAccessRestriction = PUSH - -# The default authorization control for new repositories. -# Valid values are AUTHENTICATED and NAMED -# AUTHENTICATED = any authenticated user is granted restricted access -# NAMED = only named users/teams are granted restricted access -# -# SINCE 1.1.0 -git.defaultAuthorizationControl = NAMED - -# The prefix for a users personal repository directory. -# -# Personal user repositories are created in this directory, named by the user name -# prefixed with the userRepositoryPrefix. For eaxmple, a user 'john' would have his -# personal repositories in the directory '~john'. -# -# Cannot be an empty string. Also, absolute paths are changed to relative paths by -# removing the first directory separator. -# -# It is not recommended to change this value AFTER your user's have created -# personal repositories because it will break all permissions, ownership, and -# repository push/pull operations. -# -# RESTART REQUIRED -# SINCE 1.4.0 -git.userRepositoryPrefix = ~ - -# The default incremental push tag prefix. Tag prefix applied to a repository -# that has automatic push tags enabled and does not specify a custom tag prefix. -# -# If incremental push tags are enabled, the tips of each branch in the push will -# be tagged with an increasing revision integer. -# -# e.g. refs/tags/r2345 or refs/tags/rev_2345 -# -# SINCE 1.3.0 -git.defaultIncrementalPushTagPrefix = r - -# Controls creating a repository as --shared on Unix servers. -# -# In an Unix environment where mixed access methods exist for shared repositories, -# the repository should be created with 'git init --shared' to make sure that -# it can be accessed e.g. via ssh (user git) and http (user www-data). -# -# Valid values are the values available for the '--shared' option. The the manual -# page for 'git init' for more information on shared repositories. -# -# SINCE 1.4.0 -git.createRepositoriesShared = false - -# Directory for gitignore templates used during repository creation. -# -# SINCE 1.6.0 -git.gitignoreFolder = ${baseFolder}/gitignore - -# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!) -# -# USE AT YOUR OWN RISK! -# -# If enabled, the garbage collection executor scans all repositories once a day -# at the hour of your choosing. The GC executor will take each repository "offline", -# one-at-a-time, to check if the repository satisfies it's GC trigger requirements. -# -# While the repository is offline it will be inaccessible from the web UI or from -# any of the other services (git, rpc, rss, etc). -# -# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block, -# especially on Windows systems, so if you are using other tools please coordinate -# their usage with your GC Executor schedule or do not use this feature. -# -# The GC algorithm complex and the JGit team advises caution when using their -# young implementation of GC. -# -# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics -# -# EXPERIMENTAL -# SINCE 1.2.0 -# RESTART REQUIRED -git.enableGarbageCollection = false - -# Hour of the day for the GC Executor to scan repositories. -# This value is in 24-hour time. -# -# SINCE 1.2.0 -git.garbageCollectionHour = 0 - -# The default minimum total filesize of loose objects to trigger early garbage -# collection. -# -# You may specify a custom threshold for a repository in the repository's settings. -# Common unit suffixes of k, m, or g are supported. -# -# SINCE 1.2.0 -git.defaultGarbageCollectionThreshold = 500k - -# The default period, in days, between GCs for a repository. If the total filesize -# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's -# custom threshold, this period will be short-circuited. -# -# e.g. if a repository collects 100KB of loose objects every day with a 500KB -# threshold and a period of 7 days, it will take 5 days for the loose objects to -# be collected, packed, and pruned. -# -# OR -# -# if a repository collects 10KB of loose objects every day with a 500KB threshold -# and a period of 7 days, it will take the full 7 days for the loose objects to be -# collected, packed, and pruned. -# -# You may specify a custom period for a repository in the repository's settings. -# -# The minimum value is 1 day since the GC Executor only runs once a day. -# -# SINCE 1.2.0 -git.defaultGarbageCollectionPeriod = 7 - -# Gitblit can automatically fetch ref updates for a properly configured mirror -# repository. -# -# Requirements: -# 1. you must manually clone the repository using native git -# git clone --mirror git://somewhere.com/myrepo.git -# 2. the "origin" remote must be the mirror source -# 3. the "origin" repository must be accessible without authentication OR the -# credentials must be embedded in the origin url (not recommended) -# -# Notes: -# 1. "origin" SSH urls are untested and not likely to work -# 2. mirrors cloned while Gitblit is running are likely to require clearing the -# gitblit cache (link on the repositories page of an administrator account) -# 3. Gitblit will automatically repair any invalid fetch refspecs with a "//" -# sequence. -# -# SINCE 1.4.0 -# RESTART REQUIRED -git.enableMirroring = false - -# Specify the period between update checks for mirrored repositories. -# The shortest period you may specify between mirror update checks is 5 mins. -# -# SINCE 1.4.0 -# RESTART REQUIRED -git.mirrorPeriod = 30 mins - -# Number of bytes of a pack file to load into memory in a single read operation. -# This is the "page size" of the JGit buffer cache, used for all pack access -# operations. All disk IO occurs as single window reads. Setting this too large -# may cause the process to load more data than is required; setting this too small -# may increase the frequency of read() system calls. -# -# Default on JGit is 8 KiB on all platforms. -# -# Common unit suffixes of k, m, or g are supported. -# Documentation courtesy of the Gerrit project. -# -# SINCE 1.0.0 -# RESTART REQUIRED -git.packedGitWindowSize = 8k - -# Maximum number of bytes to load and cache in memory from pack files. If JGit -# needs to access more than this many bytes it will unload less frequently used -# windows to reclaim memory space within the process. As this buffer must be shared -# with the rest of the JVM heap, it should be a fraction of the total memory available. -# -# The JGit team recommends setting this value larger than the size of your biggest -# repository. This ensures you can serve most requests from memory. -# -# Default on JGit is 10 MiB on all platforms. -# -# Common unit suffixes of k, m, or g are supported. -# Documentation courtesy of the Gerrit project. -# -# SINCE 1.0.0 -# RESTART REQUIRED -git.packedGitLimit = 10m - -# Maximum number of bytes to reserve for caching base objects that multiple deltafied -# objects reference. By storing the entire decompressed base object in a cache Git -# is able to avoid unpacking and decompressing frequently used base objects multiple times. -# -# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust -# this value. -# -# Common unit suffixes of k, m, or g are supported. -# Documentation courtesy of the Gerrit project. -# -# SINCE 1.0.0 -# RESTART REQUIRED -git.deltaBaseCacheLimit = 10m - -# Maximum number of pack files to have open at once. A pack file must be opened -# in order for any of its data to be available in a cached window. -# -# If you increase this to a larger setting you may need to also adjust the ulimit -# on file descriptors for the host JVM, as Gitblit needs additional file descriptors -# available for network sockets and other repository data manipulation. -# -# Default on JGit is 128 file descriptors on all platforms. -# Documentation courtesy of the Gerrit project. -# -# SINCE 1.0.0 -# RESTART REQUIRED -git.packedGitOpenFiles = 128 - -# Largest object size, in bytes, that JGit will allocate as a contiguous byte -# array. Any file revision larger than this threshold will have to be streamed, -# typically requiring the use of temporary files under $GIT_DIR/objects to implement -# psuedo-random access during delta decompression. -# -# Servers with very high traffic should set this to be larger than the size of -# their common big files. For example a server managing the Android platform -# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable -# setting in that environment. Setting this too high may cause the JVM to run out -# of heap space when handling very big binary files, such as device firmware or -# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. -# -# Default is 50 MiB on all platforms. -# -# Common unit suffixes of k, m, or g are supported. -# Documentation courtesy of the Gerrit project. -# -# -# NOTE: The importance of JGit's streamFileTreshold AND Git's bigFileThreshold -# ISSUE: https://bugs.eclipse.org/bugs/show_bug.cgi?id=394078 -# -# "core.bigFileThreshold -# -# Files larger than this size are stored deflated, without -# attempting delta compression. Storing large files without -# delta compression avoids excessive memory usage, at the -# slight expense of increased disk usage. -# -# Default is 512 MiB on all platforms. -# This should be reasonable for most projects as source code and other -# text files can still be delta compressed, -# but larger binary media files won't be." -# -- Git documentation -# -# If streamFileTreshold < bigFileTreshold you _may_ spend alot of time waiting -# for push and/or fetch to complete. It may even look hung. -# -# Until the issue is resolved gracefully, a workaround is to configure -# bigFileThreshold < streamFileTreshold AND then repack the repository. -# -# e.g. from the repository folder with Gitblit NOT running: -# git config core.bigFileTreshold 40m -# git gc --aggressive -# -# SINCE 1.0.0 -# RESTART REQUIRED -git.streamFileThreshold = 50m - -# When true, JGit will use mmap() rather than malloc()+read() to load data from -# pack files. The use of mmap can be problematic on some JVMs as the garbage -# collector must deduce that a memory mapped segment is no longer in use before -# a call to munmap() can be made by the JVM native code. -# -# In server applications (such as Gitblit) that need to access many pack files, -# setting this to true risks artificially running out of virtual address space, -# as the garbage collector cannot reclaim unused mapped spaces fast enough. -# -# Default on JGit is false. Although potentially slower, it yields much more -# predictable behavior. -# Documentation courtesy of the Gerrit project. -# -# SINCE 1.0.0 -# RESTART REQUIRED -git.packedGitMmap = false - -# Validate all received (pushed) objects are valid. -# -# SINCE 1.5.0 -git.checkReceivedObjects = true - -# Validate all referenced but not supplied objects are reachable. -# -# If enabled, Gitblit will verify that references to objects not contained -# within the received pack are already reachable through at least one other -# reference advertised to clients. -# -# This feature is useful when Gitblit doesn't trust the client to not provide a -# forged SHA-1 reference to an object, in an attempt to access parts of the DAG -# that they aren't allowed to see and which have been hidden from them via the -# configured AdvertiseRefsHook or RefFilter. -# -# Enabling this feature may imply at least some, if not all, of the same functionality -# performed by git.checkReceivedObjects. -# -# SINCE 1.5.0 -git.checkReferencedObjectsAreReachable = true - -# Set the maximum allowed Git object size. -# -# If an object is larger than the given size the pack-parsing will throw an exception -# aborting the receive-pack operation. The default value, 0, disables maximum -# object size checking. -# -# SINCE 1.5.0 -git.maxObjectSizeLimit = 0 - -# Set the maximum allowed pack size. -# -# A pack exceeding this size will be rejected. The default value, -1, disables -# maximum pack size checking. -# -# SINCE 1.5.0 -git.maxPackSizeLimit = -1 - -# Use the Gitblit patch receive pack for processing contributions and tickets. -# This allows the user to push a patch using the familiar Gerrit syntax: -# -# git push HEAD:refs/for/ -# -# NOTE: -# This requires git.enableGitServlet = true AND it requires an authenticated -# git transport connection (http/https) when pushing from a client. -# -# Valid services include: -# com.gitblit.tickets.FileTicketService -# com.gitblit.tickets.BranchTicketService -# com.gitblit.tickets.RedisTicketService -# -# SINCE 1.4.0 -# RESTART REQUIRED -tickets.service = - -# Globally enable or disable creation of new bug, enhancement, task, etc tickets -# for all repositories. -# -# If false, no tickets can be created through the ui for any repositories. -# If true, each repository can control if they allow new tickets to be created. -# -# NOTE: -# If a repository is accepting patchsets, new proposal tickets can be created -# regardless of this setting. -# -# SINCE 1.4.0 -tickets.acceptNewTickets = true - -# Globally enable or disable pushing patchsets to all repositories. -# -# If false, no patchsets will be accepted for any repositories. -# If true, each repository can control if they accept new patchsets. -# -# NOTE: -# If a repository is accepting patchsets, new proposal tickets can be created -# regardless of the acceptNewTickets setting. -# -# SINCE 1.4.0 -tickets.acceptNewPatchsets = true - -# Default setting to control patchset merge through the web ui. If true, patchsets -# must have an approval score to enable the merge button. This setting can be -# overriden per-repository. -# -# SINCE 1.4.0 -tickets.requireApproval = false - -# The case-insensitive regular expression used to identify and close tickets on -# push to the integration branch for commits that are NOT already referenced as -# a patchset tip. -# -# SINCE 1.5.0 -tickets.closeOnPushCommitMessageRegex = (?:fixes|closes)[\\s-]+#?(\\d+) - -# Specify the location of the Lucene Ticket index -# -# SINCE 1.4.0 -# RESTART REQUIRED -tickets.indexFolder = ${baseFolder}/tickets/lucene - -# Define the url for the Redis server. -# -# e.g. redis://localhost:6379 -# redis://:foobared@localhost:6379/2 -# -# SINCE 1.4.0 -# RESTART REQUIRED -tickets.redis.url = - -# The number of tickets to display on a page. -# -# SINCE 1.4.0 -tickets.perPage = 25 - -# The folder where plugins are loaded from. -# -# SINCE 1.5.0 -# RESTART REQUIRED -# BASEFOLDER -plugins.folder = ${baseFolder}/plugins - -# The registry of available plugins. -# -# SINCE 1.5.0 -plugins.registry = http://plugins.gitblit.com/plugins.json - -# Number of threads used to handle miscellaneous tasks in the background. -# -# SINCE 1.6.0 -# RESTART REQUIRED -execution.defaultThreadPoolSize = 1 - -# -# Groovy Integration -# - -# Location of Groovy scripts to use for Pre and Post receive hooks. -# Use forward slashes even on Windows!! -# e.g. c:/groovy -# -# RESTART REQUIRED -# SINCE 0.8.0 -# BASEFOLDER -groovy.scriptsFolder = ${baseFolder}/groovy - -# Specify the directory Grape uses for downloading libraries. -# http://groovy.codehaus.org/Grape -# -# RESTART REQUIRED -# SINCE 1.0.0 -# BASEFOLDER -groovy.grapeFolder = ${baseFolder}/groovy/grape - -# Scripts to execute on Pre-Receive. -# -# These scripts execute after an incoming push has been parsed and validated -# but BEFORE the changes are applied to the repository. You might reject a -# push in this script based on the repository and branch the push is attempting -# to change. -# -# Script names are case-sensitive on case-sensitive file systems. You may omit -# the traditional ".groovy" from this list if your file extension is ".groovy" -# -# NOTE: -# These scripts are only executed when pushing to *Gitblit*, not to other Git -# tooling you may be using. Also note that these scripts are shared between -# repositories. These are NOT repository-specific scripts! Within the script -# you may customize the control-flow for a specific repository by checking the -# *repository* variable. -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 0.8.0 -groovy.preReceiveScripts = - -# Scripts to execute on Post-Receive. -# -# These scripts execute AFTER an incoming push has been applied to a repository. -# You might trigger a continuous-integration build here or send a notification. -# -# Script names are case-sensitive on case-sensitive file systems. You may omit -# the traditional ".groovy" from this list if your file extension is ".groovy" -# -# NOTE: -# These scripts are only executed when pushing to *Gitblit*, not to other Git -# tooling you may be using. Also note that these scripts are shared between -# repositories. These are NOT repository-specific scripts! Within the script -# you may customize the control-flow for a specific repository by checking the -# *repository* variable. -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 0.8.0 -groovy.postReceiveScripts = - -# Repository custom fields for Groovy Hook mechanism -# -# List of key=label pairs of custom fields to prompt for in the Edit Repository -# page. These keys are stored in the repository's git config file in the -# section [gitblit "customFields"]. Key names are alphanumeric only. These -# fields are intended to be used for the Groovy hook mechanism where a script -# can adjust it's execution based on the custom fields stored in the repository -# config. -# -# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another -# -# SPACE-DELIMITED -# SINCE 1.0.0 -groovy.customFields = - -# -# Fanout Settings -# - -# Fanout is a PubSub notification service that can be used by Sparkleshare -# to eliminate repository change polling. The fanout service runs in a separate -# thread on a separate port from the Gitblit http/https application. -# This service is provided so that Sparkleshare may be used with Gitblit in -# firewalled environments or where reliance on Sparkleshare's default notifications -# server (notifications.sparkleshare.org) is unwanted. -# -# This service maintains an open socket connection from the client to the -# Fanout PubSub service. This service may not work properly behind a proxy server. - -# Specify the interface for Fanout to bind it's service. -# You may specify an ip or an empty value to bind to all interfaces. -# Specifying localhost will result in Gitblit ONLY listening to requests to -# localhost. -# -# SINCE 1.2.1 -# RESTART REQUIRED -fanout.bindInterface = - -# port for serving the Fanout PubSub service. <= 0 disables this service. -# On Unix/Linux systems, ports < 1024 require root permissions. -# Recommended value: 17000 -# -# SINCE 1.2.1 -# RESTART REQUIRED -fanout.port = 0 - -# Use Fanout NIO service. If false, a multi-threaded socket service will be used. -# Be advised, the socket implementation spawns a thread per connection plus the -# connection acceptor thread. The NIO implementation is completely single-threaded. -# -# SINCE 1.2.1 -# RESTART REQUIRED -fanout.useNio = true - -# Concurrent connection limit. <= 0 disables concurrent connection throttling. -# If > 0, only the specified number of concurrent connections will be allowed -# and all other connections will be rejected. -# -# SINCE 1.2.1 -# RESTART REQUIRED -fanout.connectionLimit = 0 - -# -# Authentication Settings -# - -# Require authentication to see everything but the admin pages -# -# SINCE 0.5.0 -# RESTART REQUIRED -web.authenticateViewPages = false - -# If web.authenticateViewPages=true you may optionally require a client-side -# basic authentication prompt instead of the standard form-based login. -# -# SINCE 1.3.0 -web.enforceHttpBasicAuthentication = false - -# Require admin authentication for the admin functions and pages -# -# SINCE 0.5.0 -# RESTART REQUIRED -web.authenticateAdminPages = true - -# Allow Gitblit to store a cookie in the user's browser for automatic -# authentication. The cookie is generated by the user service. -# -# SINCE 0.5.0 -web.allowCookieAuthentication = true - -# Allow deletion of non-empty repositories. This is enforced for all delete vectors. -# -# SINCE 1.6.0 -web.allowDeletingNonEmptyRepositories = true - -# Setting to include personal repositories in the main repositories list. -# -# SINCE 1.6.0 -web.includePersonalRepositories = false - -# Config file for storing project metadata -# -# SINCE 1.2.0 -# BASEFOLDER -web.projectsFile = ${baseFolder}/projects.conf - -# Either the full path to a user config file (users.conf) -# OR a fully qualified class name that implements the IUserService interface. -# -# Any custom user service implementation must have a public default constructor. -# -# SINCE 0.5.0 -# RESTART REQUIRED -# BASEFOLDER -realm.userService = ${baseFolder}/users.conf - -# Ordered list of external authentication providers which will be used if -# authentication against the local user service fails. -# -# Valid providers are: -# -# htpasswd -# ldap -# pam -# redmine -# salesforce -# windows - -# e.g. realm.authenticationProviders = htpasswd windows -# -# SINCE 1.4.0 -# RESTART REQUIRED -# SPACE-DELIMITED -realm.authenticationProviders = - -# How to store passwords. -# Valid values are plain, md5, or combined-md5. md5 is the hash of password. -# combined-md5 is the hash of username.toLowerCase()+password. -# Default is md5. -# -# SINCE 0.5.0 -realm.passwordStorage = md5 - -# Minimum valid length for a plain text password. -# Default value is 5. Absolute minimum is 4. -# -# SINCE 0.5.0 -realm.minPasswordLength = 5 - -# -# Gitblit Web Settings -# -# If blank Gitblit is displayed. -# -# SINCE 0.5.0 -web.siteName = - -# The canonical url of your Gitblit server to be used in repository url generation, -# RSS feeds, and all embedded links in email and plugin-based notifications. -# -# If you are running Gitblit on a non-standard http port (i.e. not 80 and not 443) -# then you must specify that port in this url otherwise your generated urls will be -# incorrect. -# -# The hostname of this url will be extracted for SSH and GIT protocol repository -# url generation. -# -# e.g. web.canonicalUrl = https://dev.gitblit.com -# web.canonicalUrl = https://dev.gitblit.com:8443 -# -# SINCE 1.4.0 -web.canonicalUrl = - -# You may specify a different logo image for the header but it must be 120x45px. -# If the specified file does not exist, the default Gitblit logo will be used. -# -# SINCE 1.3.0 -# BASEFOLDER -web.headerLogo = ${baseFolder}/logo.png - -# You may specify a different link URL for the logo image anchor. -# If blank the Gitblit main page URL is used. -# -# SINCE 1.3.0 -# BASEFOLDER -web.rootLink = - -# You may specify a custom header background CSS color. If unspecified, the -# default color will be used. -# -# e.g. web.headerBackgroundColor = #002060 -# -# SINCE 1.3.0 -web.headerBackgroundColor = - -# You may specify a custom header foreground CSS color. If unspecified, the -# default color will be used. -# -# e.g. web.headerForegroundColor = white -# -# SINCE 1.3.0 -web.headerForegroundColor = - -# You may specify a custom header foreground hover CSS color. If unspecified, the -# default color will be used. -# -# e.g. web.headerHoverColor = white -# -# SINCE 1.3.0 -web.headerHoverColor = - -# You may specify a custom header border CSS color. If unspecified, the default -# color will be used. -# -# e.g. web.headerBorderColor = #002060 -# -# SINCE 1.3.0 -web.headerBorderColor = - -# You may specify a custom header border CSS color. If unspecified, the default -# color will be used. -# -# e.g. web.headerBorderFocusColor = #ff9900 -# -# SINCE 1.3.0 -web.headerBorderFocusColor = - -# If *web.authenticateAdminPages*=true, users with "admin" role can create -# repositories, create users, and edit repository metadata. -# -# If *web.authenticateAdminPages*=false, any user can execute the aforementioned -# functions. -# -# SINCE 0.5.0 -web.allowAdministration = true - -# Setting to disable rendering the top-level navigation header which includes -# the login form, top-level links like dashboard, repositories, search, etc. -# This setting is only useful if you plan to embed Gitblit within another page -# or system. -# -# SINCE 1.4.0 -web.hideHeader = false - -# Allows rpc clients to list repositories and possibly manage or administer the -# Gitblit server, if the authenticated account has administrator permissions. -# See *web.enableRpcManagement* and *web.enableRpcAdministration*. -# -# SINCE 0.7.0 -web.enableRpcServlet = true - -# Allows rpc clients to manage repositories and users of the Gitblit instance, -# if the authenticated account has administrator permissions. -# Requires *web.enableRpcServlet=true*. -# -# SINCE 0.7.0 -web.enableRpcManagement = false - -# Allows rpc clients to control the server settings and monitor the health of this -# this Gitblit instance, if the authenticated account has administrator permissions. -# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*. -# -# SINCE 0.7.0 -web.enableRpcAdministration = false - -# Full path to a configurable robots.txt file. With this file you can control -# what parts of your Gitblit server respectable robots are allowed to traverse. -# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html -# -# SINCE 1.0.0 -# BASEFOLDER -web.robots.txt = ${baseFolder}/robots.txt - -# The number of minutes to cache a page in the browser since the last request. -# The default value is 0 minutes. A value <= 0 disables all page caching which -# is the default behavior for Gitblit <= 1.3.0. -# -# SINCE 1.3.1 -web.pageCacheExpires = 0 - -# If true, the web ui layout will respond and adapt to the browser's dimensions. -# if false, the web ui will use a 940px fixed-width layout. -# http://twitter.github.com/bootstrap/scaffolding.html#responsive -# -# SINCE 1.0.0 -web.useResponsiveLayout = true - -# Allow Gravatar images to be displayed in Gitblit pages. -# -# SINCE 0.8.0 -web.allowGravatar = true - -# Allow dynamic zip downloads. -# -# SINCE 0.5.0 -web.allowZipDownloads = true - -# If *web.allowZipDownloads=true* the following formats will be displayed for -# download compressed archive links: -# -# zip = standard .zip -# tar = standard tar format (preserves *nix permissions and symlinks) -# gz = gz-compressed tar -# xz = xz-compressed tar -# bzip2 = bzip2-compressed tar -# -# SPACE-DELIMITED -# SINCE 1.2.0 -web.compressedDownloads = zip gz - -# Allow optional Lucene integration. Lucene indexing is an opt-in feature. -# A repository may specify branches to index with Lucene instead of using Git -# commit traversal. There are scenarios where you may want to completely disable -# Lucene indexing despite a repository specifying indexed branches. One such -# scenario is on a resource-constrained federated Gitblit mirror. -# -# SINCE 0.9.0 -web.allowLuceneIndexing = true - -# Allows an authenticated user to create forks of a repository -# -# set this to false if you want to disable all fork controls on the web site -# -web.allowForking = true - -# Controls the length of shortened commit hash ids -# -# SINCE 1.2.0 -web.shortCommitIdLength = 6 - -# Use Clippy (Flash solution) to provide a copy-to-clipboard button. -# If false, a button with a more primitive JavaScript-based prompt box will -# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative. -# -# SINCE 0.8.0 -web.allowFlashCopyToClipboard = true - -# Default maximum number of commits that a repository may contribute to the -# activity page, regardless of the selected duration. This setting may be valuable -# for an extremely busy server. This value may also be configed per-repository -# in Edit Repository. 0 disables this throttle. -# -# SINCE 1.2.0 -web.maxActivityCommits = 0 - -# Default number of entries to include in RSS Syndication links -# -# SINCE 0.5.0 -web.syndicationEntries = 25 - -# Show the size of each repository on the repositories page. -# This requires recursive traversal of each repository folder. This may be -# non-performant on some operating systems and/or filesystems. -# -# SINCE 0.5.2 -web.showRepositorySizes = true - -# List of custom regex expressions that can be displayed in the Filters menu -# of the Repositories and Activity pages. Keep them very simple because you -# are likely to run into encoding issues if they are too complex. -# -# Use !!! to separate the filters -# -# SINCE 0.8.0 -web.customFilters = - -# Show federation registrations (without token) and the current pull status -# to non-administrator users. -# -# SINCE 0.6.0 -web.showFederationRegistrations = false - -# This is the message displayed when *web.authenticateViewPages=true*. -# This can point to a file with Markdown content. -# Specifying "gitblit" uses the internal login message. -# -# SINCE 0.7.0 -# BASEFOLDER -web.loginMessage = gitblit - -# This is the message displayed above the repositories table. -# This can point to a file with Markdown content. -# Specifying "gitblit" uses the internal welcome message. -# -# SINCE 0.5.0 -# BASEFOLDER -web.repositoriesMessage = gitblit - -# Ordered list of charsets/encodings to use when trying to display a blob. -# If empty, UTF-8 and ISO-8859-1 are used. The server's default charset -# is always appended to the encoding list. If all encodings fail to cleanly -# decode the blob content, UTF-8 will be used with the standard malformed -# input/unmappable character replacement strings. -# -# SPACE-DELIMITED -# SINCE 1.0.0 -web.blobEncodings = UTF-8 ISO-8859-1 - -# Manually set the default timezone to be used by Gitblit for display in the -# web ui. This value is independent of the JVM timezone. Specifying a blank -# value will default to the JVM timezone. -# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin -# -# SINCE 0.9.0 -# RESTART REQUIRED -web.timezone = - -# Use the client timezone when formatting dates. -# This uses AJAX to determine the browser's timezone and may require more -# server overhead because a Wicket session is created. All Gitblit pages -# attempt to be stateless, if possible. -# -# SINCE 0.5.0 -# RESTART REQUIRED -web.useClientTimezone = false - -# Time format -# -# -# SINCE 0.8.0 -web.timeFormat = HH:mm - -# Short date format -# -# -# SINCE 0.5.0 -web.datestampShortFormat = yyyy-MM-dd - -# Long date format -# -# SINCE 0.8.0 -web.datestampLongFormat = EEEE, MMMM d, yyyy - -# Long timestamp format -# -# -# SINCE 0.5.0 -web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z - -# Mount URL parameters -# This setting controls if pretty or parameter URLs are used. -# i.e. -# if true: -# http://localhost/commit/myrepo/abcdef -# if false: -# http://localhost/commit/?r=myrepo&h=abcdef -# -# SINCE 0.5.0 -# RESTART REQUIRED -web.mountParameters = true - -# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding -# in URLs as a security precaution for proxies. This setting tells Gitblit -# to preemptively replace '/' with '*' or '!' for url string parameters. -# -# -# -# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your -# *CATALINA_OPTS* or to your JVM launch parameters -# -# SINCE 0.5.2 -web.forwardSlashCharacter = / - -# Show other URLs on the summary page for accessing your git repositories -# Use spaces to separate urls. -# -# {0} is the token for the repository name -# {1} is the token for the username -# -# The username is only practical if you have setup your other git serving -# solutions accounts to have the same username as the Gitblit account. -# -# e.g. -# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0} https://{1}@localhost/r/{0} -# -# SPACE-DELIMITED -# SINCE 0.5.0 -web.otherUrls = - -# Should app-specific clone links be displayed for SourceTree, SparkleShare, etc? -# -# SINCE 1.3.0 -web.allowAppCloneLinks = true - -# Choose how to present the repositories list. -# grouped = group nested/subfolder repositories together (no sorting) -# flat = flat list of repositories (sorting allowed) -# -# SINCE 0.5.0 -web.repositoryListType = grouped - -# If using a grouped repository list and there are repositories at the -# root level of your repositories folder, you may specify the displayed -# group name with this setting. This value is only used for web presentation. -# -# SINCE 0.5.0 -web.repositoryRootGroupName = main - -# Display the repository swatch color next to the repository name link in the -# repositories list. -# -# SINCE 0.8.0 -web.repositoryListSwatches = true - -# Defines the default commit message renderer. This can be configured -# per-repository. -# -# Valid values are: plain, markdown -# -# SINCE 1.4.0 -web.commitMessageRenderer = plain - -# Control if email addresses are shown in web ui -# -# SINCE 0.5.0 -web.showEmailAddresses = true - -# Shows a combobox in the page links header with commit, committer, and author -# search selection. Default search is commit. -# -# SINCE 0.5.0 -web.showSearchTypeSelection = false - -# Controls display of activity graphs on the dashboard, activity, and summary -# pages. Charting makes use of the external Google Charts API. -# -# SINCE 0.5.0 -web.generateActivityGraph = true - -# Displays the commits branch graph in the summary page and commits/log page. -# -# SINCE 1.4.0 -web.showBranchGraph = true - -# The default number of days to show on the activity page. -# Value must exceed 0 else default of 7 is used -# -# SINCE 0.8.0 -web.activityDuration = 7 - -# Choices for days of activity to display. -# -# SPACE-DELIMITED -# SINCE 1.3.0 -web.activityDurationChoices = 1 3 7 14 21 28 - -# Maximum number of days of activity that may be displayed on the activity page. -# -# SINCE 1.3.2 -web.activityDurationMaximum = 30 - -# The number of days of commits to cache in memory for the dashboard, activity, -# and project pages. A value of 0 will disable all caching and will parse commits -# in each repository per-request. If the value > 0 these pages will try to fulfill -# requests using the commit cache. If the request specifies a period which falls -# outside the commit cache window, then the cache will be ignored and the request -# will be fulfilled by brute-force parsing all relevant commits per-repository. -# -# Consider the values specified for *web.activityDurationChoices* when setting -# the cache size AND consider adjusting the JVM -Xmx heap parameter appropriately. -# -# SINCE 1.3.0 -# RESTART REQUIRED -web.activityCacheDays = 14 - -# Case-insensitive list of authors to exclude from metrics. Useful for -# eliminating bots. -# -# SPACE-DELIMITED -# SINCE 1.3.0 -web.metricAuthorExclusions = - -# The number of commits to display on the summary page -# Value must exceed 0 else default of 20 is used -# -# SINCE 0.5.0 -web.summaryCommitCount = 16 - -# The number of tags/branches to display on the summary page. -# -1 = all tags/branches -# 0 = hide tags/branches -# N = N tags/branches -# -# SINCE 0.5.0 -web.summaryRefsCount = 5 - -# Show a README file, if available, on the summary page. -# -# SINCE 1.4.0 -web.summaryShowReadme = false - -# The number of items to show on a page before showing the first, prev, next -# pagination links. A default of 50 is used for any invalid value. -# -# SINCE 0.5.0 -web.itemsPerPage = 50 - -# The number of reflog changes to display on the overview page -# Value must exceed 0 else default of 5 is used -# -# SINCE 1.3.0 -web.overviewReflogCount = 5 - -# The number of reflog changes to show on a reflog page before show the first, -# prev, next pagination links. A default of 10 is used for any invalid value. -# -# SINCE 1.3.0 -web.reflogChangesPerPage = 10 - -# Specify the names of documents in the root of your repository to be displayed -# in tabs on your repository docs page. If the name is not found in the root -# then no tab is added. The order specified is the order displayed. Do not -# specify a file extension as the aggregation of markup extensions + txt are used -# in the search algorithm. -# -# SPACE-DELIMITED -# SINCE 1.4.0 -web.documents = readme home index changelog contributing submitting_patches copying license notice authors - -# Registered file extensions to ignore during Lucene indexing -# -# SPACE-DELIMITED -# SINCE 0.9.0 -web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt pptx png so swf tar xcf xls xlsx zip - -# Registered extensions for google-code-prettify -# -# SPACE-DELIMITED -# SINCE 0.5.0 -web.prettyPrintExtensions = aea agc basic c cbm cl clj cpp cs css dart el erl erlang frm fs go groovy hs htm html java js latex lisp ll llvm lsp lua ml moxie mumps n nemerle pascal php pl pm prefs properties proto py r R rb rd Rd rkt s S scala scm sh Splus sql ss tcl tex vb vbs vhd vhdl wiki xml xq xquery yaml yml ymlapollo - -# Registered extensions for markdown transformation -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 0.5.0 -web.markdownExtensions = md mkd markdown MD MKD - -# Registered extensions for mediawiki transformation -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.4.0 -web.mediawikiExtensions = mw mediawiki - -# Registered extensions for twiki transformation -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.4.0 -web.twikiExtensions = twiki - -# Registered extensions for textile transformation -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.4.0 -web.textileExtensions = textile - -# Registered extensions for confluence transformation -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.4.0 -web.confluenceExtensions = confluence - -# Registered extensions for tracwiki transformation -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 1.4.0 -web.tracwikiExtensions = tracwiki - -# Image extensions -# -# SPACE-DELIMITED -# SINCE 0.5.0 -web.imageExtensions = bmp jpg gif png - -# Registered extensions for binary blobs -# -# SPACE-DELIMITED -# SINCE 0.5.0 -web.binaryExtensions = 7z arc arj bin dll doc docx exe gz jar lib lzh odg odf odt pdf ppt pptx so tar xls xlsx zip - -# Aggressive heap management will run the garbage collector on every generated -# page. This slows down page generation a little but improves heap consumption. -# -# SINCE 0.5.0 -web.aggressiveHeapManagement = false - -# Run the webapp in debug mode -# -# SINCE 0.5.0 -# RESTART REQUIRED -web.debugMode = false - -# Force a default locale for all users, ignoring the browser's settings. -# An empty value allows Gitblit to use the translation preferred by the browser. -# -# Changing this value while the server is running will only affect new sessions. -# -# e.g. web.forceDefaultLocale = en -# -# SINCE 1.3.0 -web.forceDefaultLocale = - -# Enable/disable global regex substitutions (i.e. shared across repositories) -# -# SINCE 0.5.0 -# DEPRECATED 1.4.0 (migrate to bugtraq instead) -regex.global = true - -# Example global regex substitutions -# Use !!! to separate the search pattern and the replace pattern -# searchpattern!!!replacepattern -# SINCE 0.5.0 - -# regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: $3 -# SINCE 0.5.0 - -# Example Gerrit links -# regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!Change-Id: $2 -# regex.global.reviewedon = \\b(Reviewed-on:\\s*)([A-Za-z0-9:/\\.]*)\\b!!!Reviewed-on: $2 - -# Example per-repository regex substitutions overrides global -# SINCE 0.5.0 -# regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: $3 - -# -# Mail Settings -# SINCE 0.6.0 -# -# Mail settings are used to notify administrators of received federation proposals -# - -# ip or hostname of smtp server -# -# SINCE 0.6.0 -mail.server = - -# port to use for smtp requests -# -# SINCE 0.6.0 -mail.port = 25 - -# debug the mail executor -# -# SINCE 0.6.0 -mail.debug = false - -# use SMTPs flag -mail.smtps = false - -# use STARTTLS flag -# -# SINCE 1.6.0 -mail.starttls = false - -# if your smtp server requires authentication, supply the credentials here -# -# SINCE 0.6.0 -mail.username = -# SINCE 0.6.0 -mail.password = - -# from address for generated emails -# -# SINCE 0.6.0 -mail.fromAddress = - -# List of email addresses for the Gitblit administrators -# -# SPACE-DELIMITED -# SINCE 0.6.0 -mail.adminAddresses = - -# List of email addresses for sending push email notifications. -# -# This key currently requires use of the sendemail.groovy hook script. -# If you set sendemail.groovy in *groovy.postReceiveScripts* then email -# notifications for all repositories (regardless of access restrictions!) -# will be sent to these addresses. -# -# SPACE-DELIMITED -# SINCE 0.8.0 -mail.mailingLists = - -# -# Federation Settings -# SINCE 0.6.0 -# -# A Gitblit federation is a way to backup one Gitblit instance to another. -# -# *git.enableGitServlet* must be true to use this feature. - -# Your federation name is used for federation status acknowledgments. If it is -# unset, and you elect to send a status acknowledgment, your Gitblit instance -# will be identified by its hostname, if available, else your internal ip address. -# The source Gitblit instance will also append your external IP address to your -# identification to differentiate multiple pulling systems behind a single proxy. -# -# SINCE 0.6.0 -federation.name = - -# Specify the passphrase of this Gitblit instance. -# -# An unspecified (empty) passphrase disables processing federation requests. -# -# This value can be anything you want: an integer, a sentence, an haiku, etc. -# Keep the value simple, though, to avoid Java properties file encoding issues. -# -# Changing your passphrase will break any registrations you have established with other -# Gitblit instances. -# -# CASE-SENSITIVE -# SINCE 0.6.0 -# RESTART REQUIRED *(only to enable or disable federation)* -federation.passphrase = - -# Control whether or not this Gitblit instance can receive federation proposals -# from another Gitblit instance. Registering a federated Gitblit is a manual -# process. Proposals help to simplify that process by allowing a remote Gitblit -# instance to send your Gitblit instance the federation pull data. -# -# SINCE 0.6.0 -federation.allowProposals = false - -# The destination folder for cached federation proposals. -# Use forward slashes even on Windows!! -# -# SINCE 0.6.0 -# BASEFOLDER -federation.proposalsFolder = ${baseFolder}/proposals - -# The default pull frequency if frequency is unspecified on a registration -# -# SINCE 0.6.0 -federation.defaultFrequency = 60 mins - -# Federation Sets are named groups of repositories. The Federation Sets are -# available for selection in the repository settings page. You can assign a -# repository to one or more sets and then distribute the token for the set. -# This allows you to grant federation pull access to a subset of your available -# repositories. Tokens for federation sets only grant repository pull access. -# -# SPACE-DELIMITED -# CASE-SENSITIVE -# SINCE 0.6.0 -federation.sets = - -# Federation pull registrations -# Registrations are read once, at startup. -# -# RESTART REQUIRED -# -# frequency: -# The shortest frequency allowed is every 5 minutes -# Decimal frequency values are cast to integers -# Frequency values may be specified in mins, hours, or days -# Values that can not be parsed or are unspecified default to *federation.defaultFrequency* -# -# folder: -# if unspecified, the folder is *git.repositoriesFolder* -# if specified, the folder is relative to *git.repositoriesFolder* -# -# bare: -# if true, each repository will be created as a *bare* repository and will not -# have a working directory. -# -# if false, each repository will be created as a normal repository suitable -# for local work. -# -# mirror: -# if true, each repository HEAD is reset to *origin/master* after each pull. -# The repository will be flagged *isFrozen* after the initial clone. -# -# if false, each repository HEAD will point to the FETCH_HEAD of the initial -# clone from the origin until pushed to or otherwise manipulated. -# -# mergeAccounts: -# if true, remote accounts and their permissions are merged into your -# users.properties file -# -# notifyOnError: -# if true and the mail configuration is properly set, administrators will be -# notified by email of pull failures -# -# include and exclude: -# Space-delimited list of repositories to include or exclude from pull -# may be * wildcard to include or exclude all -# may use fuzzy match (e.g. org.eclipse.*) - -# -# (Nearly) Perfect Mirror example -# - -#federation.example1.url = https://go.gitblit.com -#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4 -#federation.example1.frequency = 120 mins -#federation.example1.folder = -#federation.example1.bare = true -#federation.example1.mirror = true -#federation.example1.mergeAccounts = true - -# -# Advanced Realm Settings -# - -# Auto-creates user accounts based on the servlet container principal. This -# assumes that your Gitblit install is a protected resource and your container's -# authentication process intercepts all Gitblit requests. -# -# SINCE 1.3.0 -realm.container.autoCreateAccounts = false - -# Allow or prohibit Windows guest account logins -# -# SINCE 1.3.0 -realm.windows.allowGuests = false - -# Allow user accounts belonging to the BUILTIN\Administrators group to be -# Gitblit administrators. -# -# SINCE 1.4.0 -realm.windows.permitBuiltInAdministrators = true - -# The default domain for authentication. -# -# If specified, this domain will be used for authentication UNLESS the supplied -# login name manually specifies a domain (.e.g. mydomain\james or james@mydomain) -# -# If unspecified, the username must be specified in UPN format (name@domain). -# -# if "." (dot) is specified, ONLY the local account database will be used. -# -# SINCE 1.3.0 -realm.windows.defaultDomain = - -# The PAM service name for authentication. -# default: system-auth -# -# SINCE 1.3.1 -realm.pam.serviceName = system-auth - -# The Apache htpasswd file that contains the users and passwords. -# default: ${baseFolder}/htpasswd -# -# RESTART REQUIRED -# BASEFOLDER -# SINCE 1.3.2 -realm.htpasswd.userfile = ${baseFolder}/htpasswd - -# Restrict the Salesforce user to members of this org. -# default: 0 (i.e. do not check the Org ID) -# -# SINCE 1.3.0 -realm.salesforce.orgId = 0 - -# URL of the LDAP server. -# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to -# send StartTLS command. -# -# SINCE 1.0.0 -realm.ldap.server = ldap://localhost - -# Login username for LDAP searches. -# If this value is unspecified, anonymous LDAP login will be used. -# -# e.g. mydomain\\username -# -# SINCE 1.0.0 -realm.ldap.username = cn=Directory Manager - -# Login password for LDAP searches. -# -# SINCE 1.0.0 -realm.ldap.password = password - -# Bind pattern for Authentication. -# Allow to directly authenticate an user without LDAP Searches. -# -# e.g. CN=${username},OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain -# -# SINCE 1.5.0 -realm.ldap.bindpattern = - - -# Delegate team membership control to LDAP. -# -# If true, team user memberships will be specified by LDAP groups. This will -# disable team selection in Edit User and user selection in Edit Team. -# -# If false, LDAP will only be used for authentication and Gitblit will maintain -# team memberships with the *realm.ldap.backingUserService*. -# -# SINCE 1.0.0 -realm.ldap.maintainTeams = false - -# Root node for all LDAP users -# -# This is the root node from which subtree user searches will begin. -# If blank, Gitblit will search ALL nodes. -# -# SINCE 1.0.0 -realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain - -# Filter criteria for LDAP users -# -# Query pattern to use when searching for a user account. This may be any valid -# LDAP query expression, including the standard (&) and (|) operators. -# -# Variables may be injected via the ${variableName} syntax. -# Recognized variables are: -# ${username} - The text entered as the user name -# -# SINCE 1.0.0 -realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username})) - -# Root node for all LDAP groups to be used as Gitblit Teams -# -# This is the root node from which subtree team searches will begin. -# If blank, Gitblit will search ALL nodes. -# -# SINCE 1.0.0 -realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain - -# Filter criteria for LDAP groups -# -# Query pattern to use when searching for a team. This may be any valid -# LDAP query expression, including the standard (&) and (|) operators. -# -# Variables may be injected via the ${variableName} syntax. -# Recognized variables are: -# ${username} - The text entered as the user name -# ${dn} - The Distinguished Name of the user logged in -# -# All attributes from the LDAP User record are available. For example, if a user -# has an attribute "fullName" set to "John", "(fn=${fullName})" will be -# translated to "(fn=John)". -# -# SINCE 1.0.0 -realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn})) - -# Filter criteria for empty LDAP groups -# -# Query pattern to use when searching for an empty team. This may be any valid -# LDAP query expression, including the standard (&) and (|) operators. -# -# default: (&(objectClass=group)(!(member=*))) -# SINCE 1.4.0 -realm.ldap.groupEmptyMemberPattern = (&(objectClass=group)(!(member=*))) - -# LDAP users or groups that should be given administrator privileges. -# -# Teams are specified with a leading '@' character. Groups with spaces in the -# name can be entered as "@team name". This setting only applies when using -# LDAP to maintain team memberships. -# -# e.g. realm.ldap.admins = john @git_admins "@git admins" -# -# SPACE-DELIMITED -# SINCE 1.0.0 -realm.ldap.admins = @Git_Admins - -# Attribute(s) on the USER record that indicate their display (or full) name. -# Leave blank for no mapping available in LDAP. -# -# This may be a single attribute, or a string of multiple attributes. Examples: -# displayName - Uses the attribute 'displayName' on the user record -# ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 -# attributes together, with a '.' after personalTitle -# -# SINCE 1.0.0 -realm.ldap.displayName = displayName - -# Attribute(s) on the USER record that indicate their email address. -# Leave blank for no mapping available in LDAP. -# -# This may be a single attribute, or a string of multiple attributes. Examples: -# email - Uses the attribute 'email' on the user record -# ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes -# together with a '.' and '@' creating something like first.last@gitblit.com -# -# SINCE 1.0.0 -realm.ldap.email = email - -# Attribute on the USER record that indicate their username to be used in gitblit -# when synchronizing users from LDAP -# if blank, Gitblit will use uid -# For MS Active Directory this may be sAMAccountName -# -# SINCE 1.0.0 -realm.ldap.uid = uid - -# Defines whether to synchronize all LDAP users and teams into the user service -# -# Valid values: true, false -# If left blank, false is assumed -# -# SINCE 1.4.0 -realm.ldap.synchronize = false - -# Defines the period to be used when synchronizing users and teams from ldap. -# -# Must be of the form ' ' where is one of 'MILLISECONDS', 'SECONDS', 'MINUTES', 'HOURS', 'DAYS' - -# default: 5 MINUTES -# -# RESTART REQUIRED -# SINCE 1.4.0 -realm.ldap.syncPeriod = 5 MINUTES - -# Defines whether to delete non-existent LDAP users from the user service -# during synchronization. depends on realm.ldap.synchronize = true -# -# Valid values: true, false -# If left blank, true is assumed -# -# SINCE 1.4.0 -realm.ldap.removeDeletedUsers = true - -# URL of the Redmine. -# -# SINCE 1.2.0 -realm.redmine.url = http://example.com/redmine - -# -# Gitblit GO Server Settings -# The following settings only affect the integrated GO variant. -# - -# The temporary folder to decompress the embedded gitblit webapp. -# -# SINCE 0.5.0 -# RESTART REQUIRED -# BASEFOLDER -server.tempFolder = ${baseFolder}/temp - -# Specify the maximum number of concurrent http/https Jetty worker -# threads to allow. This setting does not affect other threaded -# daemons and components of Gitblit. -# -# SINCE 1.3.0 -# RESTART REQUIRED -server.threadPoolSize = 50 - -# Context path for the GO application. You might want to change the context -# path if running Gitblit behind a proxy layer such as mod_proxy. -# -# SINCE 0.7.0 -# RESTART REQUIRED -server.contextPath = / - -# Standard http port to serve. <= 0 disables this connector. -# On Unix/Linux systems, ports < 1024 require root permissions. -# Recommended value: 80 or 8080 -# -# SINCE 0.5.0 -# RESTART REQUIRED -server.httpPort = 0 - -# Secure/SSL https port to serve. <= 0 disables this connector. -# On Unix/Linux systems, ports < 1024 require root permissions. -# Recommended value: 443 or 8443 -# -# SINCE 0.5.0 -# RESTART REQUIRED -server.httpsPort = 8443 - -# Automatically redirect http requests to the secure https connector. -# -# This setting requires that you have configured server.httpPort and server.httpsPort. -# Unless you are on a private LAN where you trust all client connections, it is -# recommended to use https for all communications. -# -# SINCE 1.4.0 -# RESTART REQUIRED -server.redirectToHttpsPort = false - -# Specify the interface for Jetty to bind the standard connector. -# You may specify an ip or an empty value to bind to all interfaces. -# Specifying localhost will result in Gitblit ONLY listening to requests to -# localhost. -# -# SINCE 0.5.0 -# RESTART REQUIRED -server.httpBindInterface = - -# Specify the interface for Jetty to bind the secure connector. -# You may specify an ip or an empty value to bind to all interfaces. -# Specifying localhost will result in Gitblit ONLY listening to requests to -# localhost. -# -# SINCE 0.5.0 -# RESTART REQUIRED -server.httpsBindInterface = - -# Alias of certificate to use for https/SSL serving. If blank the first -# certificate found in the keystore will be used. -# -# SINCE 1.2.0 -# RESTART REQUIRED -server.certificateAlias = localhost - -# Password for SSL keystore. -# Keystore password and certificate password must match. -# This is provided for convenience, its probably more secure to set this value -# using the --storePassword command line parameter. -# -# If you are using the official JRE or JDK from Oracle you may not have the -# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM. Because -# of this, your store/key password can not exceed 7 characters. If you require -# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction -# Policy files from Oracle. -# -# http://www.oracle.com/technetwork/java/javase/downloads/index.html -# -# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited -# Strength encryption is available. -# -# SINCE 0.5.0 -# RESTART REQUIRED -server.storePassword = gitblit - -# If serving over https (recommended) you might consider requiring clients to -# authenticate with ssl certificates. If enabled, only https clients with the -# a valid client certificate will be able to access Gitblit. -# -# If disabled, client certificate authentication is optional and will be tried -# first before falling-back to form authentication or basic authentication. -# -# Requiring client certificates to access any of Gitblit may be too extreme, -# consider this carefully. -# -# SINCE 1.2.0 -# RESTART REQUIRED -server.requireClientCertificates = false - -# Port for shutdown monitor to listen on. -# -# SINCE 0.5.0 -# RESTART REQUIRED -server.shutdownPort = 8081 +# +# Gitblit Settings +# + +# This settings file supports parameterization from the command-line for the +# following command-line parameters: +# +# --baseFolder ${baseFolder} SINCE 1.2.1 +# +# Settings that support ${baseFolder} parameter substitution are indicated with the +# BASEFOLDER attribute. If the --baseFolder argument is unspecified, ${baseFolder} +# and it's trailing / will be discarded from the setting value leaving a relative +# path that is equivalent to pre-1.2.1 releases. +# +# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified +# +# Git Servlet Settings +# + +# Base folder for repositories. +# This folder may contain bare and non-bare repositories but Gitblit will only +# allow you to push to bare repositories. +# Use forward slashes even on Windows!! +# e.g. c:/gitrepos +# +# SINCE 0.5.0 +# RESTART REQUIRED +# BASEFOLDER +git.repositoriesFolder = ${baseFolder}/git + +# Build the available repository list at startup and cache this list for reuse. +# This reduces disk io when presenting the repositories page, responding to rpcs, +# etc, but it means that Gitblit will not automatically identify repositories +# added or deleted by external tools. +# +# For this case you can use curl, wget, etc to issue an rpc request to clear the +# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE) +# +# SINCE 1.1.0 +git.cacheRepositoryList = true + +# Search the repositories folder subfolders for other repositories. +# Repositories MAY NOT be nested (i.e. one repository within another) +# but they may be grouped together in subfolders. +# e.g. c:/gitrepos/libraries/mylibrary.git +# c:/gitrepos/libraries/myotherlibrary.git +# +# SINCE 0.5.0 +git.searchRepositoriesSubfolders = true + +# Maximum number of folders to recurse into when searching for repositories. +# The default value, -1, disables depth limits. +# +# SINCE 1.1.0 +git.searchRecursionDepth = -1 + +# List of regex exclusion patterns to match against folders found in +# *git.repositoriesFolder*. +# Use forward slashes even on Windows!! +# e.g. test/jgit\.git +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.1.0 +git.searchExclusions = + +# List of regex url patterns for extracting a repository name when locating +# submodules. +# e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract +# *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git* +# If no matches are found then the submodule repository name is assumed to be +# whatever trails the last / character. (e.g. gitblit.git). +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.1.0 +git.submoduleUrlPatterns = .*?://github.com/(.*) + +# Specify the interface for Git Daemon to bind it's service. +# You may specify an ip or an empty value to bind to all interfaces. +# Specifying localhost will result in Gitblit ONLY listening to requests to +# localhost. +# +# SINCE 1.3.0 +# RESTART REQUIRED +git.daemonBindInterface = + +# port for serving the Git Daemon service. <= 0 disables this service. +# On Unix/Linux systems, ports < 1024 require root permissions. +# Recommended value: 9418 +# +# SINCE 1.3.0 +# RESTART REQUIRED +git.daemonPort = 9418 + +# The port for serving the SSH service. <= 0 disables this service. +# On Unix/Linux systems, ports < 1024 require root permissions. +# Recommended value: 29418 +# +# SINCE 1.5.0 +# RESTART REQUIRED +git.sshPort = 29418 + +# Specify the interface for the SSH daemon to bind its service. +# You may specify an ip or an empty value to bind to all interfaces. +# Specifying localhost will result in Gitblit ONLY listening to requests to +# localhost. +# +# SINCE 1.5.0 +# RESTART REQUIRED +git.sshBindInterface = + +# Specify the SSH key manager to use for retrieving, storing, and removing +# SSH keys. +# +# Valid key managers are: +# com.gitblit.transport.ssh.FileKeyManager +# +# SINCE 1.5.0 +git.sshKeysManager = com.gitblit.transport.ssh.FileKeyManager + +# Directory for storing user SSH keys when using the FileKeyManager. +# +# SINCE 1.5.0 +git.sshKeysFolder= ${baseFolder}/ssh + +# SSH backend NIO2|MINA. +# +# The Apache Mina project recommends using the NIO2 backend. +# +# SINCE 1.5.0 +git.sshBackend = NIO2 + +# Number of threads used to parse a command line submitted by a client over SSH +# for execution, create the internal data structures used by that command, +# and schedule it for execution on another thread. +# +# SINCE 1.5.0 +git.sshCommandStartThreads = 2 + + +# Allow push/pull over http/https with JGit servlet. +# If you do NOT want to allow Git clients to clone/push to Gitblit set this +# to false. You might want to do this if you are only using ssh:// or git://. +# If you set this false, consider changing the *web.otherUrls* setting to +# indicate your clone/push urls. +# +# SINCE 0.5.0 +git.enableGitServlet = true + +# If you want to restrict all git servlet access to those with valid X509 client +# certificates then set this value to true. +# +# SINCE 1.2.0 +git.requiresClientCertificate = false + +# Enforce date checks on client certificates to ensure that they are not being +# used prematurely and that they have not expired. +# +# SINCE 1.2.0 +git.enforceCertificateValidity = true + +# List of OIDs to extract from a client certificate DN to map a certificate to +# an account username. +# +# e.g. git.certificateUsernameOIDs = CN +# e.g. git.certificateUsernameOIDs = FirstName LastName +# +# SPACE-DELIMITED +# SINCE 1.2.0 +git.certificateUsernameOIDs = CN + +# Only serve/display bare repositories. +# If there are non-bare repositories in git.repositoriesFolder and this setting +# is true, they will be excluded from the ui. +# +# SINCE 0.9.0 +git.onlyAccessBareRepositories = false + + +# Specify the list of acceptable transports for pushes. +# If this setting is empty, all transports are acceptable. +# +# Valid choices are: GIT HTTP HTTPS SSH +# +# SINCE 1.5.0 +# SPACE-DELIMITED +git.acceptedPushTransports = HTTP HTTPS SSH + +# Allow an authenticated user to create a destination repository on a push if +# the repository does not already exist. +# +# Administrator accounts can create a repository in any project. +# These repositories are created with the default access restriction and authorization +# control values. The pushing account is set as the owner. +# +# Non-administrator accounts with the CREATE role may create personal repositories. +# These repositories are created as VIEW restricted for NAMED users. +# The pushing account is set as the owner. +# +# SINCE 1.2.0 +git.allowCreateOnPush = true + +# Global setting to control anonymous pushes. +# +# This setting allows/rejects anonymous pushes at the level of the receive pack. +# This trumps all repository config settings. While anonymous pushes are convenient +# on your own box when you are a lone developer, they are not recommended for +# any multi-user installation where accountability is required. Since Gitblit +# tracks pushes and user accounts, allowing anonymous pushes compromises that +# information. +# +# SINCE 1.4.0 +git.allowAnonymousPushes = false + +# The default access restriction for new repositories. +# Valid values are NONE, PUSH, CLONE, VIEW +# NONE = anonymous view, clone, & push +# PUSH = anonymous view & clone and authenticated push +# CLONE = anonymous view, authenticated clone & push +# VIEW = authenticated view, clone, & push +# +# SINCE 1.0.0 +git.defaultAccessRestriction = PUSH + +# The default authorization control for new repositories. +# Valid values are AUTHENTICATED and NAMED +# AUTHENTICATED = any authenticated user is granted restricted access +# NAMED = only named users/teams are granted restricted access +# +# SINCE 1.1.0 +git.defaultAuthorizationControl = NAMED + +# The prefix for a users personal repository directory. +# +# Personal user repositories are created in this directory, named by the user name +# prefixed with the userRepositoryPrefix. For eaxmple, a user 'john' would have his +# personal repositories in the directory '~john'. +# +# Cannot be an empty string. Also, absolute paths are changed to relative paths by +# removing the first directory separator. +# +# It is not recommended to change this value AFTER your user's have created +# personal repositories because it will break all permissions, ownership, and +# repository push/pull operations. +# +# RESTART REQUIRED +# SINCE 1.4.0 +git.userRepositoryPrefix = ~ + +# The default incremental push tag prefix. Tag prefix applied to a repository +# that has automatic push tags enabled and does not specify a custom tag prefix. +# +# If incremental push tags are enabled, the tips of each branch in the push will +# be tagged with an increasing revision integer. +# +# e.g. refs/tags/r2345 or refs/tags/rev_2345 +# +# SINCE 1.3.0 +git.defaultIncrementalPushTagPrefix = r + +# Controls creating a repository as --shared on Unix servers. +# +# In an Unix environment where mixed access methods exist for shared repositories, +# the repository should be created with 'git init --shared' to make sure that +# it can be accessed e.g. via ssh (user git) and http (user www-data). +# +# Valid values are the values available for the '--shared' option. The the manual +# page for 'git init' for more information on shared repositories. +# +# SINCE 1.4.0 +git.createRepositoriesShared = false + +# Directory for gitignore templates used during repository creation. +# +# SINCE 1.6.0 +git.gitignoreFolder = ${baseFolder}/gitignore + +# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!) +# +# USE AT YOUR OWN RISK! +# +# If enabled, the garbage collection executor scans all repositories once a day +# at the hour of your choosing. The GC executor will take each repository "offline", +# one-at-a-time, to check if the repository satisfies it's GC trigger requirements. +# +# While the repository is offline it will be inaccessible from the web UI or from +# any of the other services (git, rpc, rss, etc). +# +# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block, +# especially on Windows systems, so if you are using other tools please coordinate +# their usage with your GC Executor schedule or do not use this feature. +# +# The GC algorithm complex and the JGit team advises caution when using their +# young implementation of GC. +# +# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics +# +# EXPERIMENTAL +# SINCE 1.2.0 +# RESTART REQUIRED +git.enableGarbageCollection = false + +# Hour of the day for the GC Executor to scan repositories. +# This value is in 24-hour time. +# +# SINCE 1.2.0 +git.garbageCollectionHour = 0 + +# The default minimum total filesize of loose objects to trigger early garbage +# collection. +# +# You may specify a custom threshold for a repository in the repository's settings. +# Common unit suffixes of k, m, or g are supported. +# +# SINCE 1.2.0 +git.defaultGarbageCollectionThreshold = 500k + +# The default period, in days, between GCs for a repository. If the total filesize +# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's +# custom threshold, this period will be short-circuited. +# +# e.g. if a repository collects 100KB of loose objects every day with a 500KB +# threshold and a period of 7 days, it will take 5 days for the loose objects to +# be collected, packed, and pruned. +# +# OR +# +# if a repository collects 10KB of loose objects every day with a 500KB threshold +# and a period of 7 days, it will take the full 7 days for the loose objects to be +# collected, packed, and pruned. +# +# You may specify a custom period for a repository in the repository's settings. +# +# The minimum value is 1 day since the GC Executor only runs once a day. +# +# SINCE 1.2.0 +git.defaultGarbageCollectionPeriod = 7 + +# Gitblit can automatically fetch ref updates for a properly configured mirror +# repository. +# +# Requirements: +# 1. you must manually clone the repository using native git +# git clone --mirror git://somewhere.com/myrepo.git +# 2. the "origin" remote must be the mirror source +# 3. the "origin" repository must be accessible without authentication OR the +# credentials must be embedded in the origin url (not recommended) +# +# Notes: +# 1. "origin" SSH urls are untested and not likely to work +# 2. mirrors cloned while Gitblit is running are likely to require clearing the +# gitblit cache (link on the repositories page of an administrator account) +# 3. Gitblit will automatically repair any invalid fetch refspecs with a "//" +# sequence. +# +# SINCE 1.4.0 +# RESTART REQUIRED +git.enableMirroring = false + +# Specify the period between update checks for mirrored repositories. +# The shortest period you may specify between mirror update checks is 5 mins. +# +# SINCE 1.4.0 +# RESTART REQUIRED +git.mirrorPeriod = 30 mins + +# Number of bytes of a pack file to load into memory in a single read operation. +# This is the "page size" of the JGit buffer cache, used for all pack access +# operations. All disk IO occurs as single window reads. Setting this too large +# may cause the process to load more data than is required; setting this too small +# may increase the frequency of read() system calls. +# +# Default on JGit is 8 KiB on all platforms. +# +# Common unit suffixes of k, m, or g are supported. +# Documentation courtesy of the Gerrit project. +# +# SINCE 1.0.0 +# RESTART REQUIRED +git.packedGitWindowSize = 8k + +# Maximum number of bytes to load and cache in memory from pack files. If JGit +# needs to access more than this many bytes it will unload less frequently used +# windows to reclaim memory space within the process. As this buffer must be shared +# with the rest of the JVM heap, it should be a fraction of the total memory available. +# +# The JGit team recommends setting this value larger than the size of your biggest +# repository. This ensures you can serve most requests from memory. +# +# Default on JGit is 10 MiB on all platforms. +# +# Common unit suffixes of k, m, or g are supported. +# Documentation courtesy of the Gerrit project. +# +# SINCE 1.0.0 +# RESTART REQUIRED +git.packedGitLimit = 10m + +# Maximum number of bytes to reserve for caching base objects that multiple deltafied +# objects reference. By storing the entire decompressed base object in a cache Git +# is able to avoid unpacking and decompressing frequently used base objects multiple times. +# +# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust +# this value. +# +# Common unit suffixes of k, m, or g are supported. +# Documentation courtesy of the Gerrit project. +# +# SINCE 1.0.0 +# RESTART REQUIRED +git.deltaBaseCacheLimit = 10m + +# Maximum number of pack files to have open at once. A pack file must be opened +# in order for any of its data to be available in a cached window. +# +# If you increase this to a larger setting you may need to also adjust the ulimit +# on file descriptors for the host JVM, as Gitblit needs additional file descriptors +# available for network sockets and other repository data manipulation. +# +# Default on JGit is 128 file descriptors on all platforms. +# Documentation courtesy of the Gerrit project. +# +# SINCE 1.0.0 +# RESTART REQUIRED +git.packedGitOpenFiles = 128 + +# Largest object size, in bytes, that JGit will allocate as a contiguous byte +# array. Any file revision larger than this threshold will have to be streamed, +# typically requiring the use of temporary files under $GIT_DIR/objects to implement +# psuedo-random access during delta decompression. +# +# Servers with very high traffic should set this to be larger than the size of +# their common big files. For example a server managing the Android platform +# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable +# setting in that environment. Setting this too high may cause the JVM to run out +# of heap space when handling very big binary files, such as device firmware or +# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. +# +# Default is 50 MiB on all platforms. +# +# Common unit suffixes of k, m, or g are supported. +# Documentation courtesy of the Gerrit project. +# +# +# NOTE: The importance of JGit's streamFileTreshold AND Git's bigFileThreshold +# ISSUE: https://bugs.eclipse.org/bugs/show_bug.cgi?id=394078 +# +# "core.bigFileThreshold +# +# Files larger than this size are stored deflated, without +# attempting delta compression. Storing large files without +# delta compression avoids excessive memory usage, at the +# slight expense of increased disk usage. +# +# Default is 512 MiB on all platforms. +# This should be reasonable for most projects as source code and other +# text files can still be delta compressed, +# but larger binary media files won't be." +# -- Git documentation +# +# If streamFileTreshold < bigFileTreshold you _may_ spend alot of time waiting +# for push and/or fetch to complete. It may even look hung. +# +# Until the issue is resolved gracefully, a workaround is to configure +# bigFileThreshold < streamFileTreshold AND then repack the repository. +# +# e.g. from the repository folder with Gitblit NOT running: +# git config core.bigFileTreshold 40m +# git gc --aggressive +# +# SINCE 1.0.0 +# RESTART REQUIRED +git.streamFileThreshold = 50m + +# When true, JGit will use mmap() rather than malloc()+read() to load data from +# pack files. The use of mmap can be problematic on some JVMs as the garbage +# collector must deduce that a memory mapped segment is no longer in use before +# a call to munmap() can be made by the JVM native code. +# +# In server applications (such as Gitblit) that need to access many pack files, +# setting this to true risks artificially running out of virtual address space, +# as the garbage collector cannot reclaim unused mapped spaces fast enough. +# +# Default on JGit is false. Although potentially slower, it yields much more +# predictable behavior. +# Documentation courtesy of the Gerrit project. +# +# SINCE 1.0.0 +# RESTART REQUIRED +git.packedGitMmap = false + +# Validate all received (pushed) objects are valid. +# +# SINCE 1.5.0 +git.checkReceivedObjects = true + +# Validate all referenced but not supplied objects are reachable. +# +# If enabled, Gitblit will verify that references to objects not contained +# within the received pack are already reachable through at least one other +# reference advertised to clients. +# +# This feature is useful when Gitblit doesn't trust the client to not provide a +# forged SHA-1 reference to an object, in an attempt to access parts of the DAG +# that they aren't allowed to see and which have been hidden from them via the +# configured AdvertiseRefsHook or RefFilter. +# +# Enabling this feature may imply at least some, if not all, of the same functionality +# performed by git.checkReceivedObjects. +# +# SINCE 1.5.0 +git.checkReferencedObjectsAreReachable = true + +# Set the maximum allowed Git object size. +# +# If an object is larger than the given size the pack-parsing will throw an exception +# aborting the receive-pack operation. The default value, 0, disables maximum +# object size checking. +# +# SINCE 1.5.0 +git.maxObjectSizeLimit = 0 + +# Set the maximum allowed pack size. +# +# A pack exceeding this size will be rejected. The default value, -1, disables +# maximum pack size checking. +# +# SINCE 1.5.0 +git.maxPackSizeLimit = -1 + +# Use the Gitblit patch receive pack for processing contributions and tickets. +# This allows the user to push a patch using the familiar Gerrit syntax: +# +# git push HEAD:refs/for/ +# +# NOTE: +# This requires git.enableGitServlet = true AND it requires an authenticated +# git transport connection (http/https) when pushing from a client. +# +# Valid services include: +# com.gitblit.tickets.FileTicketService +# com.gitblit.tickets.BranchTicketService +# com.gitblit.tickets.RedisTicketService +# +# SINCE 1.4.0 +# RESTART REQUIRED +tickets.service = + +# Globally enable or disable creation of new bug, enhancement, task, etc tickets +# for all repositories. +# +# If false, no tickets can be created through the ui for any repositories. +# If true, each repository can control if they allow new tickets to be created. +# +# NOTE: +# If a repository is accepting patchsets, new proposal tickets can be created +# regardless of this setting. +# +# SINCE 1.4.0 +tickets.acceptNewTickets = true + +# Globally enable or disable pushing patchsets to all repositories. +# +# If false, no patchsets will be accepted for any repositories. +# If true, each repository can control if they accept new patchsets. +# +# NOTE: +# If a repository is accepting patchsets, new proposal tickets can be created +# regardless of the acceptNewTickets setting. +# +# SINCE 1.4.0 +tickets.acceptNewPatchsets = true + +# Default setting to control patchset merge through the web ui. If true, patchsets +# must have an approval score to enable the merge button. This setting can be +# overriden per-repository. +# +# SINCE 1.4.0 +tickets.requireApproval = false + +# The case-insensitive regular expression used to identify and close tickets on +# push to the integration branch for commits that are NOT already referenced as +# a patchset tip. +# +# SINCE 1.5.0 +tickets.closeOnPushCommitMessageRegex = (?:fixes|closes)[\\s-]+#?(\\d+) + +# Specify the location of the Lucene Ticket index +# +# SINCE 1.4.0 +# RESTART REQUIRED +tickets.indexFolder = ${baseFolder}/tickets/lucene + +# Define the url for the Redis server. +# +# e.g. redis://localhost:6379 +# redis://:foobared@localhost:6379/2 +# +# SINCE 1.4.0 +# RESTART REQUIRED +tickets.redis.url = + +# The number of tickets to display on a page. +# +# SINCE 1.4.0 +tickets.perPage = 25 + +# The folder where plugins are loaded from. +# +# SINCE 1.5.0 +# RESTART REQUIRED +# BASEFOLDER +plugins.folder = ${baseFolder}/plugins + +# The registry of available plugins. +# +# SINCE 1.5.0 +plugins.registry = http://plugins.gitblit.com/plugins.json + +# Number of threads used to handle miscellaneous tasks in the background. +# +# SINCE 1.6.0 +# RESTART REQUIRED +execution.defaultThreadPoolSize = 1 + +# +# Groovy Integration +# + +# Location of Groovy scripts to use for Pre and Post receive hooks. +# Use forward slashes even on Windows!! +# e.g. c:/groovy +# +# RESTART REQUIRED +# SINCE 0.8.0 +# BASEFOLDER +groovy.scriptsFolder = ${baseFolder}/groovy + +# Specify the directory Grape uses for downloading libraries. +# http://groovy.codehaus.org/Grape +# +# RESTART REQUIRED +# SINCE 1.0.0 +# BASEFOLDER +groovy.grapeFolder = ${baseFolder}/groovy/grape + +# Scripts to execute on Pre-Receive. +# +# These scripts execute after an incoming push has been parsed and validated +# but BEFORE the changes are applied to the repository. You might reject a +# push in this script based on the repository and branch the push is attempting +# to change. +# +# Script names are case-sensitive on case-sensitive file systems. You may omit +# the traditional ".groovy" from this list if your file extension is ".groovy" +# +# NOTE: +# These scripts are only executed when pushing to *Gitblit*, not to other Git +# tooling you may be using. Also note that these scripts are shared between +# repositories. These are NOT repository-specific scripts! Within the script +# you may customize the control-flow for a specific repository by checking the +# *repository* variable. +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 0.8.0 +groovy.preReceiveScripts = + +# Scripts to execute on Post-Receive. +# +# These scripts execute AFTER an incoming push has been applied to a repository. +# You might trigger a continuous-integration build here or send a notification. +# +# Script names are case-sensitive on case-sensitive file systems. You may omit +# the traditional ".groovy" from this list if your file extension is ".groovy" +# +# NOTE: +# These scripts are only executed when pushing to *Gitblit*, not to other Git +# tooling you may be using. Also note that these scripts are shared between +# repositories. These are NOT repository-specific scripts! Within the script +# you may customize the control-flow for a specific repository by checking the +# *repository* variable. +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 0.8.0 +groovy.postReceiveScripts = + +# Repository custom fields for Groovy Hook mechanism +# +# List of key=label pairs of custom fields to prompt for in the Edit Repository +# page. These keys are stored in the repository's git config file in the +# section [gitblit "customFields"]. Key names are alphanumeric only. These +# fields are intended to be used for the Groovy hook mechanism where a script +# can adjust it's execution based on the custom fields stored in the repository +# config. +# +# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another +# +# SPACE-DELIMITED +# SINCE 1.0.0 +groovy.customFields = + +# +# Fanout Settings +# + +# Fanout is a PubSub notification service that can be used by Sparkleshare +# to eliminate repository change polling. The fanout service runs in a separate +# thread on a separate port from the Gitblit http/https application. +# This service is provided so that Sparkleshare may be used with Gitblit in +# firewalled environments or where reliance on Sparkleshare's default notifications +# server (notifications.sparkleshare.org) is unwanted. +# +# This service maintains an open socket connection from the client to the +# Fanout PubSub service. This service may not work properly behind a proxy server. + +# Specify the interface for Fanout to bind it's service. +# You may specify an ip or an empty value to bind to all interfaces. +# Specifying localhost will result in Gitblit ONLY listening to requests to +# localhost. +# +# SINCE 1.2.1 +# RESTART REQUIRED +fanout.bindInterface = + +# port for serving the Fanout PubSub service. <= 0 disables this service. +# On Unix/Linux systems, ports < 1024 require root permissions. +# Recommended value: 17000 +# +# SINCE 1.2.1 +# RESTART REQUIRED +fanout.port = 0 + +# Use Fanout NIO service. If false, a multi-threaded socket service will be used. +# Be advised, the socket implementation spawns a thread per connection plus the +# connection acceptor thread. The NIO implementation is completely single-threaded. +# +# SINCE 1.2.1 +# RESTART REQUIRED +fanout.useNio = true + +# Concurrent connection limit. <= 0 disables concurrent connection throttling. +# If > 0, only the specified number of concurrent connections will be allowed +# and all other connections will be rejected. +# +# SINCE 1.2.1 +# RESTART REQUIRED +fanout.connectionLimit = 0 + +# +# Authentication Settings +# + +# Require authentication to see everything but the admin pages +# +# SINCE 0.5.0 +# RESTART REQUIRED +web.authenticateViewPages = false + +# If web.authenticateViewPages=true you may optionally require a client-side +# basic authentication prompt instead of the standard form-based login. +# +# SINCE 1.3.0 +web.enforceHttpBasicAuthentication = false + +# Require admin authentication for the admin functions and pages +# +# SINCE 0.5.0 +# RESTART REQUIRED +web.authenticateAdminPages = true + +# Allow Gitblit to store a cookie in the user's browser for automatic +# authentication. The cookie is generated by the user service. +# +# SINCE 0.5.0 +web.allowCookieAuthentication = true + +# Allow deletion of non-empty repositories. This is enforced for all delete vectors. +# +# SINCE 1.6.0 +web.allowDeletingNonEmptyRepositories = true + +# Setting to include personal repositories in the main repositories list. +# +# SINCE 1.6.0 +web.includePersonalRepositories = false + +# Config file for storing project metadata +# +# SINCE 1.2.0 +# BASEFOLDER +web.projectsFile = ${baseFolder}/projects.conf + +# Either the full path to a user config file (users.conf) +# OR a fully qualified class name that implements the IUserService interface. +# +# Any custom user service implementation must have a public default constructor. +# +# SINCE 0.5.0 +# RESTART REQUIRED +# BASEFOLDER +realm.userService = ${baseFolder}/users.conf + +# Ordered list of external authentication providers which will be used if +# authentication against the local user service fails. +# +# Valid providers are: +# +# htpasswd +# ldap +# pam +# redmine +# salesforce +# windows + +# e.g. realm.authenticationProviders = htpasswd windows +# +# SINCE 1.4.0 +# RESTART REQUIRED +# SPACE-DELIMITED +realm.authenticationProviders = + +# How to store passwords. +# Valid values are plain, md5, or combined-md5. md5 is the hash of password. +# combined-md5 is the hash of username.toLowerCase()+password. +# Default is md5. +# +# SINCE 0.5.0 +realm.passwordStorage = md5 + +# Minimum valid length for a plain text password. +# Default value is 5. Absolute minimum is 4. +# +# SINCE 0.5.0 +realm.minPasswordLength = 5 + +# +# Gitblit Web Settings +# +# If blank Gitblit is displayed. +# +# SINCE 0.5.0 +web.siteName = + +# The canonical url of your Gitblit server to be used in repository url generation, +# RSS feeds, and all embedded links in email and plugin-based notifications. +# +# If you are running Gitblit on a non-standard http port (i.e. not 80 and not 443) +# then you must specify that port in this url otherwise your generated urls will be +# incorrect. +# +# The hostname of this url will be extracted for SSH and GIT protocol repository +# url generation. +# +# e.g. web.canonicalUrl = https://dev.gitblit.com +# web.canonicalUrl = https://dev.gitblit.com:8443 +# +# SINCE 1.4.0 +web.canonicalUrl = + +# You may specify a different logo image for the header but it must be 120x45px. +# If the specified file does not exist, the default Gitblit logo will be used. +# +# SINCE 1.3.0 +# BASEFOLDER +web.headerLogo = ${baseFolder}/logo.png + +# You may specify a different link URL for the logo image anchor. +# If blank the Gitblit main page URL is used. +# +# SINCE 1.3.0 +# BASEFOLDER +web.rootLink = + +# You may specify a custom header background CSS color. If unspecified, the +# default color will be used. +# +# e.g. web.headerBackgroundColor = #002060 +# +# SINCE 1.3.0 +web.headerBackgroundColor = + +# You may specify a custom header foreground CSS color. If unspecified, the +# default color will be used. +# +# e.g. web.headerForegroundColor = white +# +# SINCE 1.3.0 +web.headerForegroundColor = + +# You may specify a custom header foreground hover CSS color. If unspecified, the +# default color will be used. +# +# e.g. web.headerHoverColor = white +# +# SINCE 1.3.0 +web.headerHoverColor = + +# You may specify a custom header border CSS color. If unspecified, the default +# color will be used. +# +# e.g. web.headerBorderColor = #002060 +# +# SINCE 1.3.0 +web.headerBorderColor = + +# You may specify a custom header border CSS color. If unspecified, the default +# color will be used. +# +# e.g. web.headerBorderFocusColor = #ff9900 +# +# SINCE 1.3.0 +web.headerBorderFocusColor = + +# If *web.authenticateAdminPages*=true, users with "admin" role can create +# repositories, create users, and edit repository metadata. +# +# If *web.authenticateAdminPages*=false, any user can execute the aforementioned +# functions. +# +# SINCE 0.5.0 +web.allowAdministration = true + +# Setting to disable rendering the top-level navigation header which includes +# the login form, top-level links like dashboard, repositories, search, etc. +# This setting is only useful if you plan to embed Gitblit within another page +# or system. +# +# SINCE 1.4.0 +web.hideHeader = false + +# Allows rpc clients to list repositories and possibly manage or administer the +# Gitblit server, if the authenticated account has administrator permissions. +# See *web.enableRpcManagement* and *web.enableRpcAdministration*. +# +# SINCE 0.7.0 +web.enableRpcServlet = true + +# Allows rpc clients to manage repositories and users of the Gitblit instance, +# if the authenticated account has administrator permissions. +# Requires *web.enableRpcServlet=true*. +# +# SINCE 0.7.0 +web.enableRpcManagement = false + +# Allows rpc clients to control the server settings and monitor the health of this +# this Gitblit instance, if the authenticated account has administrator permissions. +# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*. +# +# SINCE 0.7.0 +web.enableRpcAdministration = false + +# Full path to a configurable robots.txt file. With this file you can control +# what parts of your Gitblit server respectable robots are allowed to traverse. +# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html +# +# SINCE 1.0.0 +# BASEFOLDER +web.robots.txt = ${baseFolder}/robots.txt + +# The number of minutes to cache a page in the browser since the last request. +# The default value is 0 minutes. A value <= 0 disables all page caching which +# is the default behavior for Gitblit <= 1.3.0. +# +# SINCE 1.3.1 +web.pageCacheExpires = 0 + +# If true, the web ui layout will respond and adapt to the browser's dimensions. +# if false, the web ui will use a 940px fixed-width layout. +# http://twitter.github.com/bootstrap/scaffolding.html#responsive +# +# SINCE 1.0.0 +web.useResponsiveLayout = true + +# Allow Gravatar images to be displayed in Gitblit pages. +# +# SINCE 0.8.0 +web.allowGravatar = true + +# Allow dynamic zip downloads. +# +# SINCE 0.5.0 +web.allowZipDownloads = true + +# If *web.allowZipDownloads=true* the following formats will be displayed for +# download compressed archive links: +# +# zip = standard .zip +# tar = standard tar format (preserves *nix permissions and symlinks) +# gz = gz-compressed tar +# xz = xz-compressed tar +# bzip2 = bzip2-compressed tar +# +# SPACE-DELIMITED +# SINCE 1.2.0 +web.compressedDownloads = zip gz + +# Allow optional Lucene integration. Lucene indexing is an opt-in feature. +# A repository may specify branches to index with Lucene instead of using Git +# commit traversal. There are scenarios where you may want to completely disable +# Lucene indexing despite a repository specifying indexed branches. One such +# scenario is on a resource-constrained federated Gitblit mirror. +# +# SINCE 0.9.0 +web.allowLuceneIndexing = true + +# Allows an authenticated user to create forks of a repository +# +# set this to false if you want to disable all fork controls on the web site +# +web.allowForking = true + +# Controls the length of shortened commit hash ids +# +# SINCE 1.2.0 +web.shortCommitIdLength = 6 + +# Use Clippy (Flash solution) to provide a copy-to-clipboard button. +# If false, a button with a more primitive JavaScript-based prompt box will +# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative. +# +# SINCE 0.8.0 +web.allowFlashCopyToClipboard = true + +# Default maximum number of commits that a repository may contribute to the +# activity page, regardless of the selected duration. This setting may be valuable +# for an extremely busy server. This value may also be configed per-repository +# in Edit Repository. 0 disables this throttle. +# +# SINCE 1.2.0 +web.maxActivityCommits = 0 + +# Default number of entries to include in RSS Syndication links +# +# SINCE 0.5.0 +web.syndicationEntries = 25 + +# Show the size of each repository on the repositories page. +# This requires recursive traversal of each repository folder. This may be +# non-performant on some operating systems and/or filesystems. +# +# SINCE 0.5.2 +web.showRepositorySizes = true + +# List of custom regex expressions that can be displayed in the Filters menu +# of the Repositories and Activity pages. Keep them very simple because you +# are likely to run into encoding issues if they are too complex. +# +# Use !!! to separate the filters +# +# SINCE 0.8.0 +web.customFilters = + +# Show federation registrations (without token) and the current pull status +# to non-administrator users. +# +# SINCE 0.6.0 +web.showFederationRegistrations = false + +# This is the message displayed when *web.authenticateViewPages=true*. +# This can point to a file with Markdown content. +# Specifying "gitblit" uses the internal login message. +# +# SINCE 0.7.0 +# BASEFOLDER +web.loginMessage = gitblit + +# This is the message displayed above the repositories table. +# This can point to a file with Markdown content. +# Specifying "gitblit" uses the internal welcome message. +# +# SINCE 0.5.0 +# BASEFOLDER +web.repositoriesMessage = gitblit + +# Ordered list of charsets/encodings to use when trying to display a blob. +# If empty, UTF-8 and ISO-8859-1 are used. The server's default charset +# is always appended to the encoding list. If all encodings fail to cleanly +# decode the blob content, UTF-8 will be used with the standard malformed +# input/unmappable character replacement strings. +# +# SPACE-DELIMITED +# SINCE 1.0.0 +web.blobEncodings = UTF-8 ISO-8859-1 + +# Manually set the default timezone to be used by Gitblit for display in the +# web ui. This value is independent of the JVM timezone. Specifying a blank +# value will default to the JVM timezone. +# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin +# +# SINCE 0.9.0 +# RESTART REQUIRED +web.timezone = + +# Use the client timezone when formatting dates. +# This uses AJAX to determine the browser's timezone and may require more +# server overhead because a Wicket session is created. All Gitblit pages +# attempt to be stateless, if possible. +# +# SINCE 0.5.0 +# RESTART REQUIRED +web.useClientTimezone = false + +# Time format +# +# +# SINCE 0.8.0 +web.timeFormat = HH:mm + +# Short date format +# +# +# SINCE 0.5.0 +web.datestampShortFormat = yyyy-MM-dd + +# Long date format +# +# SINCE 0.8.0 +web.datestampLongFormat = EEEE, MMMM d, yyyy + +# Long timestamp format +# +# +# SINCE 0.5.0 +web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z + +# Mount URL parameters +# This setting controls if pretty or parameter URLs are used. +# i.e. +# if true: +# http://localhost/commit/myrepo/abcdef +# if false: +# http://localhost/commit/?r=myrepo&h=abcdef +# +# SINCE 0.5.0 +# RESTART REQUIRED +web.mountParameters = true + +# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding +# in URLs as a security precaution for proxies. This setting tells Gitblit +# to preemptively replace '/' with '*' or '!' for url string parameters. +# +# +# +# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your +# *CATALINA_OPTS* or to your JVM launch parameters +# +# SINCE 0.5.2 +web.forwardSlashCharacter = / + +# Show other URLs on the summary page for accessing your git repositories +# Use spaces to separate urls. +# +# {0} is the token for the repository name +# {1} is the token for the username +# +# The username is only practical if you have setup your other git serving +# solutions accounts to have the same username as the Gitblit account. +# +# e.g. +# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0} https://{1}@localhost/r/{0} +# +# SPACE-DELIMITED +# SINCE 0.5.0 +web.otherUrls = + +# Should app-specific clone links be displayed for SourceTree, SparkleShare, etc? +# +# SINCE 1.3.0 +web.allowAppCloneLinks = true + +# Choose how to present the repositories list. +# grouped = group nested/subfolder repositories together (no sorting) +# flat = flat list of repositories (sorting allowed) +# +# SINCE 0.5.0 +web.repositoryListType = grouped + +# If using a grouped repository list and there are repositories at the +# root level of your repositories folder, you may specify the displayed +# group name with this setting. This value is only used for web presentation. +# +# SINCE 0.5.0 +web.repositoryRootGroupName = main + +# Display the repository swatch color next to the repository name link in the +# repositories list. +# +# SINCE 0.8.0 +web.repositoryListSwatches = true + +# Defines the default commit message renderer. This can be configured +# per-repository. +# +# Valid values are: plain, markdown +# +# SINCE 1.4.0 +web.commitMessageRenderer = plain + +# Control if email addresses are shown in web ui +# +# SINCE 0.5.0 +web.showEmailAddresses = true + +# Shows a combobox in the page links header with commit, committer, and author +# search selection. Default search is commit. +# +# SINCE 0.5.0 +web.showSearchTypeSelection = false + +# Controls display of activity graphs on the dashboard, activity, and summary +# pages. Charting makes use of the external Google Charts API. +# +# SINCE 0.5.0 +web.generateActivityGraph = true + +# Displays the commits branch graph in the summary page and commits/log page. +# +# SINCE 1.4.0 +web.showBranchGraph = true + +# The default number of days to show on the activity page. +# Value must exceed 0 else default of 7 is used +# +# SINCE 0.8.0 +web.activityDuration = 7 + +# Choices for days of activity to display. +# +# SPACE-DELIMITED +# SINCE 1.3.0 +web.activityDurationChoices = 1 3 7 14 21 28 + +# Maximum number of days of activity that may be displayed on the activity page. +# +# SINCE 1.3.2 +web.activityDurationMaximum = 30 + +# The number of days of commits to cache in memory for the dashboard, activity, +# and project pages. A value of 0 will disable all caching and will parse commits +# in each repository per-request. If the value > 0 these pages will try to fulfill +# requests using the commit cache. If the request specifies a period which falls +# outside the commit cache window, then the cache will be ignored and the request +# will be fulfilled by brute-force parsing all relevant commits per-repository. +# +# Consider the values specified for *web.activityDurationChoices* when setting +# the cache size AND consider adjusting the JVM -Xmx heap parameter appropriately. +# +# SINCE 1.3.0 +# RESTART REQUIRED +web.activityCacheDays = 14 + +# Case-insensitive list of authors to exclude from metrics. Useful for +# eliminating bots. +# +# SPACE-DELIMITED +# SINCE 1.3.0 +web.metricAuthorExclusions = + +# The number of commits to display on the summary page +# Value must exceed 0 else default of 20 is used +# +# SINCE 0.5.0 +web.summaryCommitCount = 16 + +# The number of tags/branches to display on the summary page. +# -1 = all tags/branches +# 0 = hide tags/branches +# N = N tags/branches +# +# SINCE 0.5.0 +web.summaryRefsCount = 5 + +# Show a README file, if available, on the summary page. +# +# SINCE 1.4.0 +web.summaryShowReadme = false + +# The number of items to show on a page before showing the first, prev, next +# pagination links. A default of 50 is used for any invalid value. +# +# SINCE 0.5.0 +web.itemsPerPage = 50 + +# The number of reflog changes to display on the overview page +# Value must exceed 0 else default of 5 is used +# +# SINCE 1.3.0 +web.overviewReflogCount = 5 + +# The number of reflog changes to show on a reflog page before show the first, +# prev, next pagination links. A default of 10 is used for any invalid value. +# +# SINCE 1.3.0 +web.reflogChangesPerPage = 10 + +# Specify the names of documents in the root of your repository to be displayed +# in tabs on your repository docs page. If the name is not found in the root +# then no tab is added. The order specified is the order displayed. Do not +# specify a file extension as the aggregation of markup extensions + txt are used +# in the search algorithm. +# +# SPACE-DELIMITED +# SINCE 1.4.0 +web.documents = readme home index changelog contributing submitting_patches copying license notice authors + +# Registered file extensions to ignore during Lucene indexing +# +# SPACE-DELIMITED +# SINCE 0.9.0 +web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt pptx png so swf tar xcf xls xlsx zip + +# Registered extensions for google-code-prettify +# +# SPACE-DELIMITED +# SINCE 0.5.0 +web.prettyPrintExtensions = aea agc basic c cbm cl clj cpp cs css dart el erl erlang frm fs go groovy h hpp hs htm html java js latex lisp ll llvm lsp lua ml moxie mumps n nemerle pascal php pl pm prefs properties proto py r R rb rd Rd rkt s S scala scm sh Splus sql ss tcl tex vb vbs vhd vhdl wiki xml xq xquery yaml yml ymlapollo + +# Registered extensions for markdown transformation +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 0.5.0 +web.markdownExtensions = md mkd markdown MD MKD + +# Registered extensions for mediawiki transformation +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.4.0 +web.mediawikiExtensions = mw mediawiki + +# Registered extensions for twiki transformation +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.4.0 +web.twikiExtensions = twiki + +# Registered extensions for textile transformation +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.4.0 +web.textileExtensions = textile + +# Registered extensions for confluence transformation +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.4.0 +web.confluenceExtensions = confluence + +# Registered extensions for tracwiki transformation +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 1.4.0 +web.tracwikiExtensions = tracwiki + +# Image extensions +# +# SPACE-DELIMITED +# SINCE 0.5.0 +web.imageExtensions = bmp jpg gif png + +# Registered extensions for binary blobs +# +# SPACE-DELIMITED +# SINCE 0.5.0 +web.binaryExtensions = 7z arc arj bin dll doc docx exe gz jar lib lzh odg odf odt pdf ppt pptx so tar xls xlsx zip + +# Aggressive heap management will run the garbage collector on every generated +# page. This slows down page generation a little but improves heap consumption. +# +# SINCE 0.5.0 +web.aggressiveHeapManagement = false + +# Run the webapp in debug mode +# +# SINCE 0.5.0 +# RESTART REQUIRED +web.debugMode = false + +# Force a default locale for all users, ignoring the browser's settings. +# An empty value allows Gitblit to use the translation preferred by the browser. +# +# Changing this value while the server is running will only affect new sessions. +# +# e.g. web.forceDefaultLocale = en +# +# SINCE 1.3.0 +web.forceDefaultLocale = + +# Enable/disable global regex substitutions (i.e. shared across repositories) +# +# SINCE 0.5.0 +# DEPRECATED 1.4.0 (migrate to bugtraq instead) +regex.global = true + +# Example global regex substitutions +# Use !!! to separate the search pattern and the replace pattern +# searchpattern!!!replacepattern +# SINCE 0.5.0 + +# regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: $3 +# SINCE 0.5.0 + +# Example Gerrit links +# regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!Change-Id: $2 +# regex.global.reviewedon = \\b(Reviewed-on:\\s*)([A-Za-z0-9:/\\.]*)\\b!!!Reviewed-on: $2 + +# Example per-repository regex substitutions overrides global +# SINCE 0.5.0 +# regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: $3 + +# +# Mail Settings +# SINCE 0.6.0 +# +# Mail settings are used to notify administrators of received federation proposals +# + +# ip or hostname of smtp server +# +# SINCE 0.6.0 +mail.server = + +# port to use for smtp requests +# +# SINCE 0.6.0 +mail.port = 25 + +# debug the mail executor +# +# SINCE 0.6.0 +mail.debug = false + +# use SMTPs flag +mail.smtps = false + +# use STARTTLS flag +# +# SINCE 1.6.0 +mail.starttls = false + +# if your smtp server requires authentication, supply the credentials here +# +# SINCE 0.6.0 +mail.username = +# SINCE 0.6.0 +mail.password = + +# from address for generated emails +# +# SINCE 0.6.0 +mail.fromAddress = + +# List of email addresses for the Gitblit administrators +# +# SPACE-DELIMITED +# SINCE 0.6.0 +mail.adminAddresses = + +# List of email addresses for sending push email notifications. +# +# This key currently requires use of the sendemail.groovy hook script. +# If you set sendemail.groovy in *groovy.postReceiveScripts* then email +# notifications for all repositories (regardless of access restrictions!) +# will be sent to these addresses. +# +# SPACE-DELIMITED +# SINCE 0.8.0 +mail.mailingLists = + +# +# Federation Settings +# SINCE 0.6.0 +# +# A Gitblit federation is a way to backup one Gitblit instance to another. +# +# *git.enableGitServlet* must be true to use this feature. + +# Your federation name is used for federation status acknowledgments. If it is +# unset, and you elect to send a status acknowledgment, your Gitblit instance +# will be identified by its hostname, if available, else your internal ip address. +# The source Gitblit instance will also append your external IP address to your +# identification to differentiate multiple pulling systems behind a single proxy. +# +# SINCE 0.6.0 +federation.name = + +# Specify the passphrase of this Gitblit instance. +# +# An unspecified (empty) passphrase disables processing federation requests. +# +# This value can be anything you want: an integer, a sentence, an haiku, etc. +# Keep the value simple, though, to avoid Java properties file encoding issues. +# +# Changing your passphrase will break any registrations you have established with other +# Gitblit instances. +# +# CASE-SENSITIVE +# SINCE 0.6.0 +# RESTART REQUIRED *(only to enable or disable federation)* +federation.passphrase = + +# Control whether or not this Gitblit instance can receive federation proposals +# from another Gitblit instance. Registering a federated Gitblit is a manual +# process. Proposals help to simplify that process by allowing a remote Gitblit +# instance to send your Gitblit instance the federation pull data. +# +# SINCE 0.6.0 +federation.allowProposals = false + +# The destination folder for cached federation proposals. +# Use forward slashes even on Windows!! +# +# SINCE 0.6.0 +# BASEFOLDER +federation.proposalsFolder = ${baseFolder}/proposals + +# The default pull frequency if frequency is unspecified on a registration +# +# SINCE 0.6.0 +federation.defaultFrequency = 60 mins + +# Federation Sets are named groups of repositories. The Federation Sets are +# available for selection in the repository settings page. You can assign a +# repository to one or more sets and then distribute the token for the set. +# This allows you to grant federation pull access to a subset of your available +# repositories. Tokens for federation sets only grant repository pull access. +# +# SPACE-DELIMITED +# CASE-SENSITIVE +# SINCE 0.6.0 +federation.sets = + +# Federation pull registrations +# Registrations are read once, at startup. +# +# RESTART REQUIRED +# +# frequency: +# The shortest frequency allowed is every 5 minutes +# Decimal frequency values are cast to integers +# Frequency values may be specified in mins, hours, or days +# Values that can not be parsed or are unspecified default to *federation.defaultFrequency* +# +# folder: +# if unspecified, the folder is *git.repositoriesFolder* +# if specified, the folder is relative to *git.repositoriesFolder* +# +# bare: +# if true, each repository will be created as a *bare* repository and will not +# have a working directory. +# +# if false, each repository will be created as a normal repository suitable +# for local work. +# +# mirror: +# if true, each repository HEAD is reset to *origin/master* after each pull. +# The repository will be flagged *isFrozen* after the initial clone. +# +# if false, each repository HEAD will point to the FETCH_HEAD of the initial +# clone from the origin until pushed to or otherwise manipulated. +# +# mergeAccounts: +# if true, remote accounts and their permissions are merged into your +# users.properties file +# +# notifyOnError: +# if true and the mail configuration is properly set, administrators will be +# notified by email of pull failures +# +# include and exclude: +# Space-delimited list of repositories to include or exclude from pull +# may be * wildcard to include or exclude all +# may use fuzzy match (e.g. org.eclipse.*) + +# +# (Nearly) Perfect Mirror example +# + +#federation.example1.url = https://go.gitblit.com +#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4 +#federation.example1.frequency = 120 mins +#federation.example1.folder = +#federation.example1.bare = true +#federation.example1.mirror = true +#federation.example1.mergeAccounts = true + +# +# Advanced Realm Settings +# + +# Auto-creates user accounts based on the servlet container principal. This +# assumes that your Gitblit install is a protected resource and your container's +# authentication process intercepts all Gitblit requests. +# +# SINCE 1.3.0 +realm.container.autoCreateAccounts = false + +# Allow or prohibit Windows guest account logins +# +# SINCE 1.3.0 +realm.windows.allowGuests = false + +# Allow user accounts belonging to the BUILTIN\Administrators group to be +# Gitblit administrators. +# +# SINCE 1.4.0 +realm.windows.permitBuiltInAdministrators = true + +# The default domain for authentication. +# +# If specified, this domain will be used for authentication UNLESS the supplied +# login name manually specifies a domain (.e.g. mydomain\james or james@mydomain) +# +# If unspecified, the username must be specified in UPN format (name@domain). +# +# if "." (dot) is specified, ONLY the local account database will be used. +# +# SINCE 1.3.0 +realm.windows.defaultDomain = + +# The PAM service name for authentication. +# default: system-auth +# +# SINCE 1.3.1 +realm.pam.serviceName = system-auth + +# The Apache htpasswd file that contains the users and passwords. +# default: ${baseFolder}/htpasswd +# +# RESTART REQUIRED +# BASEFOLDER +# SINCE 1.3.2 +realm.htpasswd.userfile = ${baseFolder}/htpasswd + +# Restrict the Salesforce user to members of this org. +# default: 0 (i.e. do not check the Org ID) +# +# SINCE 1.3.0 +realm.salesforce.orgId = 0 + +# URL of the LDAP server. +# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to +# send StartTLS command. +# +# SINCE 1.0.0 +realm.ldap.server = ldap://localhost + +# Login username for LDAP searches. +# If this value is unspecified, anonymous LDAP login will be used. +# +# e.g. mydomain\\username +# +# SINCE 1.0.0 +realm.ldap.username = cn=Directory Manager + +# Login password for LDAP searches. +# +# SINCE 1.0.0 +realm.ldap.password = password + +# Bind pattern for Authentication. +# Allow to directly authenticate an user without LDAP Searches. +# +# e.g. CN=${username},OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain +# +# SINCE 1.5.0 +realm.ldap.bindpattern = + + +# Delegate team membership control to LDAP. +# +# If true, team user memberships will be specified by LDAP groups. This will +# disable team selection in Edit User and user selection in Edit Team. +# +# If false, LDAP will only be used for authentication and Gitblit will maintain +# team memberships with the *realm.ldap.backingUserService*. +# +# SINCE 1.0.0 +realm.ldap.maintainTeams = false + +# Root node for all LDAP users +# +# This is the root node from which subtree user searches will begin. +# If blank, Gitblit will search ALL nodes. +# +# SINCE 1.0.0 +realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain + +# Filter criteria for LDAP users +# +# Query pattern to use when searching for a user account. This may be any valid +# LDAP query expression, including the standard (&) and (|) operators. +# +# Variables may be injected via the ${variableName} syntax. +# Recognized variables are: +# ${username} - The text entered as the user name +# +# SINCE 1.0.0 +realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username})) + +# Root node for all LDAP groups to be used as Gitblit Teams +# +# This is the root node from which subtree team searches will begin. +# If blank, Gitblit will search ALL nodes. +# +# SINCE 1.0.0 +realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain + +# Filter criteria for LDAP groups +# +# Query pattern to use when searching for a team. This may be any valid +# LDAP query expression, including the standard (&) and (|) operators. +# +# Variables may be injected via the ${variableName} syntax. +# Recognized variables are: +# ${username} - The text entered as the user name +# ${dn} - The Distinguished Name of the user logged in +# +# All attributes from the LDAP User record are available. For example, if a user +# has an attribute "fullName" set to "John", "(fn=${fullName})" will be +# translated to "(fn=John)". +# +# SINCE 1.0.0 +realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn})) + +# Filter criteria for empty LDAP groups +# +# Query pattern to use when searching for an empty team. This may be any valid +# LDAP query expression, including the standard (&) and (|) operators. +# +# default: (&(objectClass=group)(!(member=*))) +# SINCE 1.4.0 +realm.ldap.groupEmptyMemberPattern = (&(objectClass=group)(!(member=*))) + +# LDAP users or groups that should be given administrator privileges. +# +# Teams are specified with a leading '@' character. Groups with spaces in the +# name can be entered as "@team name". This setting only applies when using +# LDAP to maintain team memberships. +# +# e.g. realm.ldap.admins = john @git_admins "@git admins" +# +# SPACE-DELIMITED +# SINCE 1.0.0 +realm.ldap.admins = @Git_Admins + +# Attribute(s) on the USER record that indicate their display (or full) name. +# Leave blank for no mapping available in LDAP. +# +# This may be a single attribute, or a string of multiple attributes. Examples: +# displayName - Uses the attribute 'displayName' on the user record +# ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 +# attributes together, with a '.' after personalTitle +# +# SINCE 1.0.0 +realm.ldap.displayName = displayName + +# Attribute(s) on the USER record that indicate their email address. +# Leave blank for no mapping available in LDAP. +# +# This may be a single attribute, or a string of multiple attributes. Examples: +# email - Uses the attribute 'email' on the user record +# ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes +# together with a '.' and '@' creating something like first.last@gitblit.com +# +# SINCE 1.0.0 +realm.ldap.email = email + +# Attribute on the USER record that indicate their username to be used in gitblit +# when synchronizing users from LDAP +# if blank, Gitblit will use uid +# For MS Active Directory this may be sAMAccountName +# +# SINCE 1.0.0 +realm.ldap.uid = uid + +# Defines whether to synchronize all LDAP users and teams into the user service +# +# Valid values: true, false +# If left blank, false is assumed +# +# SINCE 1.4.0 +realm.ldap.synchronize = false + +# Defines the period to be used when synchronizing users and teams from ldap. +# +# Must be of the form ' ' where is one of 'MILLISECONDS', 'SECONDS', 'MINUTES', 'HOURS', 'DAYS' + +# default: 5 MINUTES +# +# RESTART REQUIRED +# SINCE 1.4.0 +realm.ldap.syncPeriod = 5 MINUTES + +# Defines whether to delete non-existent LDAP users from the user service +# during synchronization. depends on realm.ldap.synchronize = true +# +# Valid values: true, false +# If left blank, true is assumed +# +# SINCE 1.4.0 +realm.ldap.removeDeletedUsers = true + +# URL of the Redmine. +# +# SINCE 1.2.0 +realm.redmine.url = http://example.com/redmine + +# +# Gitblit GO Server Settings +# The following settings only affect the integrated GO variant. +# + +# The temporary folder to decompress the embedded gitblit webapp. +# +# SINCE 0.5.0 +# RESTART REQUIRED +# BASEFOLDER +server.tempFolder = ${baseFolder}/temp + +# Specify the maximum number of concurrent http/https Jetty worker +# threads to allow. This setting does not affect other threaded +# daemons and components of Gitblit. +# +# SINCE 1.3.0 +# RESTART REQUIRED +server.threadPoolSize = 50 + +# Context path for the GO application. You might want to change the context +# path if running Gitblit behind a proxy layer such as mod_proxy. +# +# SINCE 0.7.0 +# RESTART REQUIRED +server.contextPath = / + +# Standard http port to serve. <= 0 disables this connector. +# On Unix/Linux systems, ports < 1024 require root permissions. +# Recommended value: 80 or 8080 +# +# SINCE 0.5.0 +# RESTART REQUIRED +server.httpPort = 0 + +# Secure/SSL https port to serve. <= 0 disables this connector. +# On Unix/Linux systems, ports < 1024 require root permissions. +# Recommended value: 443 or 8443 +# +# SINCE 0.5.0 +# RESTART REQUIRED +server.httpsPort = 8443 + +# Automatically redirect http requests to the secure https connector. +# +# This setting requires that you have configured server.httpPort and server.httpsPort. +# Unless you are on a private LAN where you trust all client connections, it is +# recommended to use https for all communications. +# +# SINCE 1.4.0 +# RESTART REQUIRED +server.redirectToHttpsPort = false + +# Specify the interface for Jetty to bind the standard connector. +# You may specify an ip or an empty value to bind to all interfaces. +# Specifying localhost will result in Gitblit ONLY listening to requests to +# localhost. +# +# SINCE 0.5.0 +# RESTART REQUIRED +server.httpBindInterface = + +# Specify the interface for Jetty to bind the secure connector. +# You may specify an ip or an empty value to bind to all interfaces. +# Specifying localhost will result in Gitblit ONLY listening to requests to +# localhost. +# +# SINCE 0.5.0 +# RESTART REQUIRED +server.httpsBindInterface = + +# Alias of certificate to use for https/SSL serving. If blank the first +# certificate found in the keystore will be used. +# +# SINCE 1.2.0 +# RESTART REQUIRED +server.certificateAlias = localhost + +# Password for SSL keystore. +# Keystore password and certificate password must match. +# This is provided for convenience, its probably more secure to set this value +# using the --storePassword command line parameter. +# +# If you are using the official JRE or JDK from Oracle you may not have the +# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM. Because +# of this, your store/key password can not exceed 7 characters. If you require +# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction +# Policy files from Oracle. +# +# http://www.oracle.com/technetwork/java/javase/downloads/index.html +# +# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited +# Strength encryption is available. +# +# SINCE 0.5.0 +# RESTART REQUIRED +server.storePassword = gitblit + +# If serving over https (recommended) you might consider requiring clients to +# authenticate with ssl certificates. If enabled, only https clients with the +# a valid client certificate will be able to access Gitblit. +# +# If disabled, client certificate authentication is optional and will be tried +# first before falling-back to form authentication or basic authentication. +# +# Requiring client certificates to access any of Gitblit may be too extreme, +# consider this carefully. +# +# SINCE 1.2.0 +# RESTART REQUIRED +server.requireClientCertificates = false + +# Port for shutdown monitor to listen on. +# +# SINCE 0.5.0 +# RESTART REQUIRED +server.shutdownPort = 8081 -- 2.39.5