The AdvertiseRefsHook can be called twice if the following conditions
hold:
1. This AdvertiseRefsHook doesn't set this.refs.
2. getAdvertisedOrDefaultRefs is called after getFilteredRefs.
For example, this can happen when fetchV2 is called after lsRefsV2
when using a stateful bidirectional transport.
The second call does not accomplish anything useful. Guard it with
'if (!advertiseRefsHookCalled)' to avoid wasted work.
Reported-by: Jonathan Tan <jonathantanmy@google.com>
Change-Id: Ib746582e4ef645b767a5b3fb969596df99ac2ab5
Signed-off-by: Jonathan Nieder <jrn@google.com>
UploadPack: Filter refs used for want-ref resolution
In the longer term, we can add support for this to the
RequestValidator interface. In the short term, this is a minimal
band-aid to ensure any refs the client requests are visible to the
client.
Change-Id: I0683c7a00e707cf97eef6c6bb782671d0a550ffe
Reported-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
UploadPack: Defer want-ref resolution to after parsing
ProtocolV2Parser explains:
// TODO(ifrade): This validation should be done after the
// protocol parsing. It is not a protocol problem asking for an
// unexisting ref and we wouldn't need the ref database here.
Do so. This way all ref database accesses are in one place, in the
UploadPack class.
No user-visible change intended --- this is just to make the code
easier to manipulate.
Change-Id: I68e87dff7b9a63ccc169bd0836e8e8baaf5d1048
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
AdvertiseRefsHook is used to limit the visibility of the refs in Gerrit.
If this hook is not called, then all refs are treated as visible.
In protocol v2, the hook is not called, causing the server to advertise
all refs. This bug was introduced in v5.0.0.201805221745-rc1~1^2~9
(Execute AdvertiseRefsHook only for protocol v0 and v1, 2018-05-14).
Even before then, the hook was not called in requests after the
capability advertisement, so in transports like HTTP that do not retain
state between round-trips, the server would advertise all refs in
response to an ls-refs (ls-remote) request.
Fix both cases by using getAdvertisedOrDefaultRefs to retrieve the
advertised refs in lsRefs, ensuring the hook is called in all cases that
use its result.
[jn: backported to stable-5.0; split out from a larger patch that also
fixes protocol v0; avoided filtering this.refs by ref prefix]
Change-Id: I64bce0e72d15b90baccc235c067e57b6af21b55f
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
AdvertiseRefsHook is used to limit the visibility of the refs in Gerrit.
If this hook is not called, then all refs are treated as visible,
causing the server to serve commits reachable from branches the client
should not be able to access, if asked to via a request naming a guessed
object id.
This bug was introduced in v2.0.0.201206130900-r~123 (Modify refs in
UploadPack/ReceivePack using a hook interface, 2012-02-08). Stateful
bidirectional transports are not affected.
Fix it by moving the AdvertiseRefsHook call to
getAdvertisedOrDefaultRefs, ensuring the hook is called in all cases.
[jn: backported to stable-4.5 by splitting out tests and the protocol v2
specific parts]
Change-Id: I159f396216354f2eda3968d17802e166d8c8ec2d
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
BasePackConnection: Check for expected length of ref advertisement
When a server sends a ref advertisement using protocol v2 it contains
lines other than ref names and sha1s. Attempting to get the sha1 out
of such a line using the substring method can result in a SIOOB error
when it doesn't actually contain the sha1 and ref name.
Add a check that the line is of the expected length, and subsequently
that the extracted object id is valid, and if not throw an exception.
Change-Id: Id92fe66ff8b6deb2cf987d81929f8d0602c399f4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
UploadPack has a setTransferConfig method which allows to set the
transfer config, however since the constructors of TransferConfig
have the default package visibility it is not possible for any
application using UploadPack, for example Gerrit, to actually set
a transfer config.
Make the constructors public. This is consistent with the public
constructors for example on PackConfig.
Change-Id: I07080255838421871403b2b2bcc294aa8f621c57
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Set GIT_DIR and GIT_WORK_TREE when calling hooks.
Bug: 541622
Change-Id: I6153d8a6a934ec37a3a5e7319c2d0e516f539ab7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
After cloning a repo with a submodule, non-recursively, JGit would
encounter in its TreeWalk in IndexDiff:
* first, a missing gitlink (in index & HEAD, not in working tree)
* second, the untracked folder (not in index and head, in working tree)
As a result, it would report the submodule as missing. Canonical git
reports a clean workspace.
The root cause of this is that the path of a gitlink "x" did
not compare equal to the path of a tree "x" in JGit.
Correct Paths.compare() to account for that. If two paths are otherwise
equal, then let gitlinks match both trees and files. Matching trees
solves the bug. Matching files is necessary to handle the case where
the gitlink directory was replaced by a file; see the new test case
IndexDiffSubmoduleTest.testSubmoduleReplacedByFile(). Comparisons of
unequal paths are left untouched, so the sort order is unchanged.
After the fix, another bug(?) in WorkingTreeIterator became apparent:
with core.dirNoGitLinks = true, it was no longer possible to overwrite
a gitlink in the index. This is now fixed in WorkingTreeIterator.
Add new test cases for the bug itself and for some related cases
(submodule directory deleted or replaced by a file) in
IndexDiffSubmoduleTest. Add a test for missing files in IndexDiffTest,
and adapt the PathsTest to test matching gitlinks.
Bug: 467631
Change-Id: I0549d10d46b1858e5eec3cc15095aa9f1d5f5280
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
when multiple match options are given in git describe the result must
not depend on the order of the match options. JGit wrongly picked the
first match using the match options in the order they were defined. Fix
this by concatenating the streams of matching tags for all match options
and then choosing the first match on the concatenated stream sorted in
tie break order.
See https://git-scm.com/docs/git-describe#git-describe---matchltpatterngt
Change-Id: Id01433d35fa16fb4c30526605bee041ac1d954b2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add a method to get all values of HTTP header defined as list
According to RFC 2616 [1] header field names are case insensitive.
Header fields defined as a comma separated list can have multiple header
fields with the same field name. Add a method to HttpConnection which
retrieves all values with a given header field name with the field name
compared case insensitive.
[1] https://tools.ietf.org/html/rfc2616#section-4.2"
Change-Id: I7f601b21cda99e84f43f866c7c7cb4cb0e3cf5c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This partially reverts commit a551b646: revert the changes in
RawParseUtils.lineMap(). Forcing all blobs containing a NUL byte
as a single line causes blame to produce useless results as soon
as it hits any version containing a NUL byte.
Doing binary detection at this level also has the problem that the
user cannot control it. Not by setting the text attribute nor in any
other way.
This came up in bug 541036, where a Java source inadvertently
contained NUL bytes in strings. Even fixing this by using escapes
"\000" will not fix JGit's blame for this file because the past
versions will still contain the NUL byte.
Native git can blame that file from bug 541036 fine.
Added new tests verifying that blaming a text file containing a NUL
byte produces sensible results.
Bug: 541036
Change-Id: I8991bec88e9827cc096868c6026ea1890b6d0d32
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This continues what commit d9ac7ddf10
(Remove unnecessary modifiers from interfaces, 2018-11-15) started.
Change-Id: I89720985a5a986722a0dcb9b5e9bbc25996bd5b3
This reverts the workaround introduced by
1c6c73c5a9b8dd700be45d658f165a464265dba7, which is a patch for dealing
with a buggy C Git client v1.7.5 in 2012. We'll stop supporting very old
C Git clients.
Change-Id: I94999a39101c96f210b5eca3c2f620c15eb1ac1b
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
From Oracle's "Defining an interface":
"All abstract, default, and static methods in an interface are
implicitly public, so you can omit the public modifier."
(Without any modifier, the interface methods are also abstract, so we
omit also the "abstract")
"In addition, an interface can contain constant declarations. All
constant values defined in an interface are implicitly public, static,
and final. Once again, you can omit these modifiers."
This makes the code more consistent. Now all interfaces under
org.eclipse.jgit follow the guidelines.
Change-Id: I4fe6deb111899ec1b4318ab5a6050f3851fa1fd3
Signed-off-by: Ivan Frade <ifrade@google.com>
Add a new ssh client implementation based on Apach MINA sshd 2.0.0.
This implementation uses JGit's own config file parser and host entry
resolver. Code inspection of the Apache MINA implementation revealed
a few bugs or idiosyncrasies that immediately would re-introduce bugs
already fixed in the past in JGit.
Apache MINA sshd is not without quirks either, and I had to configure
and override more than I had expected. But at least it was all doable
in clean ways.
Apache MINA boasts support for Bouncy Castle, so in theory this should
open the way to using more ssh key algorithms, such as ed25519.
The implementation is in a separate bundle and is still not used in
the core org.eclipse.jgit bundle. The tests re-use the ssh tests from
the core test bundle.
Bug: 520927
Change-Id: Ib35e73c35799140fe050d1ff4fb18d0d3596580e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add more ssh tests: pushing, known_host file handling, etc.
Add support for git-receive-pack to the ssh git server and add two
new tests for pushing.
This actually uncovered an undocumented requirement in TransportSftp:
the FTP rename operation assumes POSIX semantics, i.e., that the
target is removed. This works as written only for servers that
support and advertise the "posix-rename@openssh.com" FTP extension.
Our little Apache MINA server does not advertise this extension.
Fix the FtpChannel implementation for Jsch to handle this case in a
meaningful way so that it can pass the new "push over sftp" test.
Add more tests to test the behavior of server host key checking.
Also refactor the tests generally to separate better the test
framework from the actual tests.
Bug: 520927
Change-Id: Ia4bb85e17ddacde7b36ee8c2d5d454bbfa66dfc3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Introduce an FtpChannel abstraction, which can be obtained from a
RemoteSession. In JSchSession, wrap a JSch ChannelSftp as such an
FtpChannel. The JSch-specific SftpException is also mapped to a
generic FtpException. Rewrite TransportSftp to use only the new
abstraction layer.
This makes it possible to provide alternate ssh/sftp implementations.
Bug: 520927
Change-Id: I379026f7d4122f34931df909a28e73c02cd8a1da
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The lock is obtained in receivePackAndCheckConnectivity. It seems to me
the structure that requres the caller to unlock the lock is wrong, but
at least by calling in finally ensures it is called even if an exception
is thrown.
Change-Id: I123841b017baf5acffe0064d1004ef11a0a5e6c2
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Do not add an artificial line break to the message, since it may become
much wider due to the embedded exception messages anyway.
The layout shall be controlled by the egit supplied message dialog using
layout constraints.
Bug: 540537
Change-Id: I4257b52e5e59689dfcbab47bd7c075b3fd031837
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Correct behaviour as git 1.7.1.1 is to resolve tie-breakers to choose
the most recent tag.
https://github.com/git/git/blob/master/Documentation/RelNotes/1.7.1.1.txt:
* "git describe" did not tie-break tags that point at the same commit
correctly; newer ones are preferred by paying attention to the
tagger date now.
Bug: 538610
Change-Id: Ib0b2a301997bb7f75935baf7005473f4de952a64
Signed-off-by: Håvard Wall <haavardw@gmail.com>
Simplify RevWalk#iterator by factoring out common code
Factor out a helper that calls next() and tunnels IOException in a
RuntimeException, similar to TunnelException.tunnel(RevWalk::next) in
Guava terms[1].
This should make the code a little more readable. No functional
change intended.
[1] https://github.com/google/guava/issues/2828#issuecomment-304187823
Change-Id: I97c062d03a17663d5c40895fd3d2c6a7306d4f39
Signed-off-by: Jonathan Nieder <jrn@google.com>
MissingObjectException and IncorrectObjectTypeException are subclasses
of IOException.
Change-Id: Ib4e1f37ce1b0b08e69ba3375bbdb6ee82ee4f036
Signed-off-by: Jonathan Nieder <jrn@google.com>
Suppose that a repository has the following commit graph:
B C
\ /
A
and it was cloned with --shallow-exclude=A. DepthGenerator does not mark
C as shallow, causing an invalid repository to be produced on the
client, because A is not sent. (A similar issue occurs when
--shallow-since is used to exclude A but neither B nor C.)
This happens whenever an excluded commit has more than one child that is
to be sent to the client. Fix DepthGenerator to handle this case
correctly.
While we're editing DepthWalk.Commit, fix the documentation of
DepthWalk.Commit#isBoundary.
Change-Id: I7068abf0fe0c864d1b0e56e1616dad1aa8719411
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Move the bulk of the basic parsing and host entry handling into a
new class OpenSshConfigFile that has no dependencies on any concrete
ssh implementation. Make the existing OpenSshConfig use the new
parser.
Introduce a new class SshConstants collecting all the various ssh-
related string literals. Also use TreeMaps with a case-insensitive
key comparator instead of converting keys to uppercase. Add a test
to verify that keys are matched case-insensitively.
Most of the parsing code was simply moved, except that the new
parser supports looking up entries given host name, port, and user
name, and can thus handle more %-substitutions correctly. This
feature is not yet used and cannot be used with JSch since JSch
only has a ConfigRepository.getConfig(String) interface.
The split is still worth the trouble as it opens the way to using
another ssh client altogether. Apache MINA sshd, for instance,
resolves host entries giving host name, port, and user name.
(Apache MINA has a built-in ssh config handling, but that has
problems, too: its pattern matching is case-insensitive, and its
merging of host entries if several match is not the same as in
OpenSsh. But with this refactoring, it will be possible to plug in
OpenSshConfigFile into an Apache MINA sshd client without dragging
along JSch.)
One test case that doesn't make sense anymore has been removed. It
tested that repeatedly querying for a host entry returned the same
object. That is no longer true since the caching has been moved to
a deeper level.
Bug: 520927
Change-Id: I6381d52b29099595e6eaf8b05c786aeeaefbf9cc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Fix package exports in org.eclipse.jgit MANIFEST.MF
Do not export o.e.j.internal.transport.parser as public package;
restrict visibility to org.eclipse.jgit.test only.
Add two packages that were not listed at all (o.e.j.internal.revwalk
and o.e.j.internal.submodule) marked as x-internal:=true.
Change-Id: I9188356075515ad354b724102fbd6304b682de6a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The removed method and the new interface method only affect implementors
which is ok in a minor release following OSGi semantic versioning.
Change-Id: Ia5e55bd803965c7590c9278eecc6bdd36241383f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RepoCommand: Preserve executable bit in <copyfile>
The copyfile entry in the manifest file copies the contents of the file
but doesn't keep the executable flag. This is inconsistent with repo
tool behaviour, plus is natural to expect that the copy of a executable
file is executable.
Transfer the executable bit when copying the file, aligning the
RepoCommand with repo tool and user expectations.
Change-Id: I01b24f482d5939e01d496f032388b3a5c02a912a
Signed-off-by: Ivan Frade <ifrade@google.com>
RepoCommand.RemoteReader: Add method to read contents and mode of file
The RepoCommand.RemoteReader interface doesn't offer access to the mode
of a file. Caller can only default to mark the copied objects as regular
files, losing e.g. the executable bit (if set).
Add a new method readFileWithMode that returns the contents and mode of
the remote file. It supersedes the readFile method, that is marked as
deprecated.
Now callers can set correctly the file mode of the copied file.
Change-Id: I8fce01e4bc5707434c0cbc4aebbae1b6b64756f0
Signed-off-by: Ivan Frade <ifrade@google.com>
Silence API errors for new methods added to DepthWalk
237abe6a added method getDeepenNots() with a default implementation and
method getDeepenNotFlag() to the interface DepthWalk. This affects
implementers which is ok in minor release following OSGi semantic
versioning.
Change-Id: I1c872da261fc6825e1e310127761b8b8a6d397d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Remove unused text "symlinkCannotBeWrittenAsTheLinkTarget"
The only reference to this externalized text was deleted in c88d34b0.
Change-Id: Iecc7cc89192d69431dddb6550a02f66f0b09accc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Jonathan Nieder
Matthias Sohn
Masaya Suzuki
David Pursehouse
Thomas Wolf
Gunnar Wagenknecht
Ivan Frade
Michael Keppler
Håvard Wall
Jonathan Tan