Check the last line of the last hunk of a file, not the last line of
the whole patch.
Note that C git only checks that this line starts with "\ " and is at
least 12 characters long because of possible different texts when non-
English messages are used.
Change-Id: I0db81699eb3e99ed7b536a3e2b8dc97df1f58a89
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ApplyCommand: handle completely empty context lines in text patches
C git treats completely empty lines as empty context lines (which
traditionally have a single blank). Apparently newer GNU diff may
produce such lines; see [1]. ("Newer" meaning "since 2006"...)
[1] https://github.com/git/git/commit/b507b465f7831
Change-Id: I80c1f030edb17a46289b1dabf11a2648d2660d38
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ApplyCommand: use byte arrays for text patches, not strings
Instead of converting the patch bytes to strings apply the patch on
byte level, like C git does. Converting the input lines and the hunk
lines from bytes to strings and then applying the patch based on
strings may give surprising results if a patch converts a text file
from one encoding to another. Moreover, in the end we don't know which
encoding to use to write the result.
Previous code just wrote the result as UTF-8, which forcibly changed
the encoding if the original input had some other encoding (even if the
patch had the same non-UTF-8 encoding). It was also wrong if the input
was UTF-8, and the patch should have changed the encoding to something
else.
So use ByteBuffers instead of Strings. This has the additional advantage
that all these ByteBuffers can share the underlying byte arrays of the
input and of the patch, so it also reduces memory consumption.
Change-Id: I450975f2ba0e7d0bec8973e3113cc2e7aea187ee
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Implement applying binary patches. Handles both literal and delta
patches. Note that C git also runs binary files through the clean
and smudge filters. Implement the same safeguards against corrupted
patches as in C git: require the full OIDs to be present in the patch
file, and apply a binary patch only if both pre- and post-image hashes
match.
Add tests for applying literal and delta patches.
Bug: 371725
Change-Id: I71dc214fe4145d7cc8e4769384fb78c7d0d6c220
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a new BinaryDeltaInputStream that applies a delta provided by
another InputStream to a given base. Because delta application needs
random access to the base, the base itself cannot be yet another
InputStream. But at least this enables streaming of the result.
Add a simple test using delta hunks generated by C git.
Bug: 371725
Change-Id: Ibd26fa2f49860737ad5c5387f7f4870d3e85e628
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ApplyCommand: add streams to read/write binary patch hunks
Add streams that can encode or decode git binary patch data on the fly.
Git writes binary patches base-85 encoded, at most 52 un-encoded bytes,
with the unencoded data length prefixed in a one-character encoding, and
suffixed with a newline character.
Add a test for both the new input and the output stream. The test
roundtrips binary data of different lengths in different ways.
Bug: 371725
Change-Id: Ic3faebaa4637520f5448b3d1acd78d5aaab3907a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add an implementation for base-85 encoding and decoding [1]. Git binary
patches use this format.
Base-85 encoding assembles bytes as 32-bit MSB values, then converts
these values to base-85 numbers (always 5 bytes) encoded as printable
ASCII characters. Decoding base-85 is the reverse operation. Note
that decoding may overflow on invalid input as 85^5 > 2^32. Encodings
always have a length that is a multiple of 5. If input length is not
divisible by 4, padding bytes are (logically) added, which are ignored
when decoding. The encoding for n bytes has thus always exactly length
(n + 3) / 4 * 5 in integer arithmetic (truncating division).
Includes tests.
[1] https://datatracker.ietf.org/doc/html/rfc1924
Bug: 371725
Change-Id: Ib5b9a503cd62cf70e080a4fb38c8cd1eeeaebcfe
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ApplyCommand: convert to git internal format before applying patch
Applying a patch on Windows failed if the patch had the (normal)
single-LF line endings, but the file on disk had the usual Windows
CR-LF line endings.
Git (and JGit) compute diffs on the git-internal blob, i.e., after
CR-LF transformation and clean filtering. Applying patches to files
directly is thus incorrect and may fail if CR-LF settings don't
match, or if clean/smudge filtering is involved.
Change ApplyCommand to run the file content through the check-in
filters before applying the patch, and run the result through the
check-out filters. This makes patch application succeed even if the
patch has single-LFs, but the file has CR-LF and core.autocrlf is
true.
Add tests for various combinations of line endings in the file and in
the patch, and a test to verify the clean/smudge handling.
See also [1].
Running the file though clean/smudge may give strange results with
LFS-managed files. JGit's DiffFormatter has some extra code and
applies the smudge filter again after having run the file through
the check-in filters (CR-LF and clean). So JGit can actually produce
a diff on LFS-managed files using the normal diff machinery. (If it
doesn't run out of memory, that is. After all, LFS is intended for
_large_ files.) How such a diff would be applied with either C git
or JGit is entirely unclear; neither has any code for this special
case. Compare also [2].
Note that C git just doesn't know about LFS and always diffs after
the check-in filter chain, so for LFS files, it'll produce a diff
of the LFS pointers.
[1] https://github.com/git/git/commit/c24f3abac
[2] https://github.com/git-lfs/git-lfs/issues/440
Bug: 571585
Change-Id: I8f71ff26313b5773ff1da612b0938ad2f18751f5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use Character.isWhitespace() instead of Character.isSpaceChar() to
treat TABs as whitespace, too.
Change-Id: Iffc59c13357d981ede6a1e0feb6ea6ff03fb3064
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Negated patterns were handled wrongly. According to the OpenBSD
ssh_config man page,[1] a negated pattern never matches. Negated
patterns make only sense if there are positive patterns; the
negated pattern then can define exceptions for the positive
patterns.
OpenSshConfigFile did this wrongly. It handled "!foo" as "matching
everything but foo", but actually the semantics is "if the input is
"foo", this entry doesn't apply. If the input is anything else,
other patterns determine whether the entry may apply.".
[1] https://man.openbsd.org/ssh_config
Change-Id: I50f6e46581b7ece4c949eddf62f4a265573ec29e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.12:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I1c936183e1fa17ea95ada7849a75bc76af275fa3
* stable-5.11:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I6184772bdeca1b9ccecf6e400ae15604ab4f5a69
* stable-5.10:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I0f1511be5375716d41565e72b271cb956c3e847b
* stable-5.9:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: Ifa135077d8d07d2317df3b479822e30d87eca950
* stable-5.8:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I9ca7a0237f87d1d4bcaba81e709eaa67902f27e5
* stable-5.7:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I7ed3f47cb46e6c1bf483702c8925a24e88658e47
* stable-5.6:
Remove texts which were added by mistake in 00386272
Fix formatting which was broken in 00386272
Change-Id: I45d444b360485564744bf3dfad2c2f5a5e7fcdf6
* stable-5.9:
LockFile: create OutputStream only when needed
Remove ReftableNumbersNotIncreasingException
Fix stamping to produce stable file timestamps
Change-Id: I056382d1d93f3e0a95838bdd1f0be89711c8a722
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.
Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has different conflict resolution strategies:
* There is a tree merge strategy "ours" which just ignores any changes
from theirs ("-s ours"). JGit also has the mirror strategy "theirs"
ignoring any changes from "ours". (This doesn't exist in C git.)
Adapt StashApplyCommand and CherrypickCommand to be able to use those
tree merge strategies.
* For the resolve/recursive tree merge strategies, there are content
conflict resolution strategies "ours" and "theirs", which resolve
any conflict hunks by taking the "ours" or "theirs" hunk. In C git
those correspond to "-Xours" or -Xtheirs". Implement that in
MergeAlgorithm, and add API to set and pass through such a strategy
for resolving content conflicts.
* The "ours/theirs" content conflict resolution strategies also apply
for binary files. Handle these cases in ResolveMerger.
Note that the content conflict resolution strategies ("-X ours/theirs")
do _not_ apply to modify/delete or delete/modify conflicts. Such
conflicts are always reported as conflicts by C git. They do apply,
however, if one side completely clears a file's content.
Bug: 501111
Change-Id: I2c9c170c61c440a2ab9c387991e7a0c3ab960e07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Allow file mode conflicts in virtual base commit on recursive merge.
Similar to https://git.eclipse.org/r/c/jgit/jgit/+/175166, ignore
path that have conflicts on attributes, so that the virtual base could
be used by RecursiveMerger.
Change-Id: I99c95445a305558d55bbb9c9e97446caaf61c154
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
Similar to git config file reading lock the file only when writing.
There may still be lock conflicts on writing, but those in the worst
case result in an entry not being added and thus being asked for later
again.
Because the OpenSshServerkeyDatabase and its HostKeyFiles may be (and
usually are) shared between different SSH sessions, we still need to
ensure in-process mutual exclusion.
Bug: 559548
Change-Id: I4af97628deff9eaac2520576917c856949f2680d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Allow info messages in UsernamePasswordCredentialsProvider
o.e.j.ssh.apache produces passphrase prompts containing
InformationalMessage items to show the fingerprint of the key
the passphrase is being asked for. Allow this so that the credentials
provider can be used with o.e.j.ssh.apache.
Change-Id: Ibc2ffd3a987d3118952726091b9b80442972dfd8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH 8.4 has introduced simple environment variable substitution
for some keys. Implement that feature in our ssh config file parser,
too.
Bug: 572103
Change-Id: I360f2c5510eea4ec3329aeedf3d29dfefc9163f0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apache MINA sshd has an implementation of this, but it doesn't comply
to RFC 8308 [1] and it is buggy. (See SSHD-1141 [2].)
Add a simpler KexExtensionHandler and if the server sends extension
server-sig-algs, use its value to re-order the chosen signature
algorithms such that the algorithms the server announced as supported
are at the front.
If the server didn't tell us anything, don't do anything. RFC 8308
suggests for RSA to default to ssh-rsa, but says once rsa-sha2-* was
"widely enough" adopted, defaulting to that might be OK.
Currently we seem to be in a transition phase; Fedora 33 has already
disabled ssh-rsa by default, and openssh is about to do so. Whatever
we might do without info from the server, it'd be good for some servers
and bad for others. So don't do anything and let the user re-order via
ssh config PubkeyAcceptedAlgorithms on a case-by-case basis.
[1] https://tools.ietf.org/html/rfc8308
[2] https://issues.apache.org/jira/browse/SSHD-1141
Bug: 572056
Change-Id: I59aa691a030ffe0fae54289df00ca5c6e165817b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Thomas Wolf
Matthias Sohn
Marija Savtchouk