Do not update the ref hot bit when checking isIndexLoaded
DfsPackFile.isIndexLoaded() uses the DfsBlockCache.Ref.get() method
to check if the index loaded. However, using the get() method marks
a hot bit in the cache, which can cause the index to never be unloaded
and seem hotter than it really is. Add a has() method which only
checks if the value is not null and does not update the hot bit.
Change-Id: I7e9ed216f6e273e8f5d79ae573973197654419b4
Don't delete .idx file if .pack file can't be deleted
If during an garbage collection old packfiles are deleted it could
happen that on certain platforms the index file can be deleted but the
packfile can't be deleted (because someone locked the file). This led
to repositories with packfiles without corresponding index files. Those
zombie-packfiles potentially consume a lot of space on disk and it is
never tried to delete them again. Try to avoid this situation by
deleting packfiles first and don't try to delete the other files if we
can't delete the packfile. This gives us the chance to delete the
packfile during next GC.
This commit only improves the situation - there is still the chance for
orphan files during packfile deletion. We don't have an atomic delete
of multiple files .
Change-Id: I0a19ae630186f07d0cc7fe9df246fa1cedeca8f6
We need this to enable building jgit with dependencies from Orbit
version used by Luna.
Default target platform is Kepler. In order to use Luna run
mvn clean install -P platform-luna -f org.eclipse.jgit.packaging/pom.xml
Change-Id: I544516d97067f45d1034929b534ad1600136614d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Result of c.containsAll(c) is always true for any collection c.
Change-Id: I853cbb44bdc03e2b54229bb9c36ae42e02dcc4d9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Grant access to internal jgit package to org.eclipse.jgit.junit
This silences some discouraged access warnings issued since
TestRepository uses PackWriter which is in an internal package.
Change-Id: Ic9c4631e237c2fe1996c518328ecc2a9ab5c348b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Interactive Rebase: Do actions if there were conflicts
If a commit was marked for edit, reword, squash or fixup, but the
interactive rebase stopped because of a conflict, the step was not done
after conflict resolution. This is done now.
Change-Id: If8e7ccc50469165744f2b8a53d180f9ba0f72330
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Rebase interactive should finish if last step is edit
When the last step was an edit step, rebase interactive did not finish
after continuing the rebase. Instead, it returned with the status
FAST_FORWARD.
Change-Id: Ib19857474ac089dfeaae665ad5e95c66c21099b0
* changes:
Use absolute paths for file:// URIs in tests
Use getPath() in FileResolverTest
Extract protocol constants to a common class
Move repeat() to utility class for tests
Remove hardcoded target/trash from test cases
Remove dependency on StatusCommandTest
Remove dependency on DiffFormatterReflowTest
Remove unnecessary import of BaseConnection in MessageWriter
With the new RebaseResult.EDIT a client can now distinguish if rebase
stopped due to a conflict or because the commit was marked for edit in
an interactive rebase.
Change-Id: I40f2311cf43ed5f290dcda65a7bd85ba770a85f5
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Add Squash/Fixup support for rebase interactive in RebaseCommand
The rebase command now supports squash and fixup. Both actions are not
allowed as the first step of the rebase.
In JGit, before any rebase step is performed, the next commit is
already cherry-picked. This commit keeps that behaviour. In case of
squash or fixup a soft reset to the parent is perfomed afterwards.
CQ: 7684
Bug: 396510
Change-Id: I3c4190940b4d7f19860e223d647fc78705e57203
Signed-off-by: Tobias Pfeifer <to.pfeifer@web.de>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Declare that org.eclipse.jgit.transport uses com.jcraft.jsch
This should prevent class cast problems caused by jgit and egit bundles
wiring to different versions of com.jcraft.jsch.
Bug: 420903
Change-Id: Icabe40209ea07369e2b7eee31952d131aef3fbf1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also use MockSystemReader in GitDateParserBadlyFormattedTest
All tests should use MockSystemReader to isolate them from the
underlying platform specifics.
GitDateParserBadlyFormattedTest wasn't using MockSystemReader which
induced Bug 420772 as a side effect since GitDateParser caches
SimpleDateFormat instances without regarding their locale. This will be
fixed in another change
Bug: 420772
Change-Id: I798e55d05730a71bb0326f80aea5488541d6c1f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When run under Buck the repository paths may be relative. Request
an absolute path to construct the URI, as relative paths are not
supported in file:// style URIs.
Change-Id: I85470d1db2f4e80cba30f1559c0d99bdfa8ac410
Necessary to get tests to pass when running under Buck.
Has no impact on Maven based invocation of tests.
Change-Id: I437114863df0bac346c94ef13796def47333d916
Avoid depending on AutoCRLFOutputStreamTest from within another
test such as AutoCRLFInputStreamTest. Breaking the dependency up
allows the test classes to be built and executed in parallel.
Change-Id: Ic9ab2b6ec74ac87ff4adda8a802ae343dd2a6235
Buck does not create a target directory for the build output, this
is Maven specific and the project unit tests should not rely on it.
Instead follow the pattern used by org.eclipse.jgit.test which is to
create a temporary directory in the system temporary folder, and
configure the Maven surefire plugin to use the target directory.
Change-Id: Iebe5093332343a90f51080614e083aac0d29c26d
Move the set constructor function to a Sets utility class,
allowing the tests to compile in parallel.
Change-Id: Id6fac2533fab8d423f949c892f199af2491a450b
Reference the resource from the root of the CLASSPATH, allowing the
test classes to be compiled in parallel with no dependencies.
Change-Id: Ia6becf30ccfe93b8585b82293d9a4863b0cf837e
Enable to prepare interactive rebase and then start it explicitly
Add Operation.PROCESS_STEPS to RebaseCommand to enable starting
interactive rebase explicitly after rebase steps have been configured.
Change-Id: I2d6f0de82010ea6523fbce6fb4501e847bdcdddc
Signed-off-by: Tobias Pfeifer <to.pfeifer@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Checking of spaces at the end of the file name caused the
test to fail for Windows only.
Bug: 396662
Change-Id: I47bcccb0fa32ce606276c3f30d454851d115ca11
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Parse commitId and shortMessage of a commented out line in rebase todo
A rebase todo file consists of regular non-comment action lines and
comment lines. In case that a regular action line has been commented out
(i.e. prefixed with a hash '#'), the RebaseTodoLine that is representing
this line should hold the values for commitId and shortMessage even
though it's a comment line. This allows to switch between comment and
non-comment easily even after the file has been persisted and reread.
Change-Id: I56ec2ba08eaf3772e2d74d937dd496209a744d4b
Signed-off-by: Tobias Pfeifer <to.pfeifer@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Enhance reading of git-rebase-todo formatted files
Reading and writing files formatted like the git-rebase-todo files was
hidden in the RebaseCommand. Certain constructs (like leading tabs and
spaces) have not been handled as in native git. Also the upcoming
rebase interactive feature in EGit needs reading/writing these files
independently from a RebaseCommand.
Therefore reading and writing those files has been moved to the
Repository class. RebaseCommand gets smaller because of that and doesn't
have to deal with reading/writing files.
Additional tests for empty todo-list files, or files containing comments
have been added.
Change-Id: I323f3619952fecdf28ddf50139a88e0bea34f5ba
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Also-by: Tobias Pfeifer <to.pfeifer@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This allows subclasses to configure the HTTP connection (for example,
to add headers to the request).
Bug: 400724
Change-Id: I6f9d699e158a7b9d813c8fa8d273992a28994e41
Signed-off-by: Michael Nelson <michael.nelson@tasktop.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Otherwise the MockSystemReader from the test setup is active for other
tests.
Change-Id: I7caf693bd692d06936e29efd4dc4aabb48c1c39b
Signed-off-by: Robin Stocker <robin@nibor.org>
Matthias Sohn
Robin Rosenberg
Robin Stocker
Colby Ranger
Christian Halstrick
Stefan Lay
Shawn Pearce
Tobias Pfeifer
Dave Borowitz
Tomasz Zarna
Michael Nelson
Kaloyan Raev
Rüdiger Herrmann