Git has different conflict resolution strategies:
* There is a tree merge strategy "ours" which just ignores any changes
from theirs ("-s ours"). JGit also has the mirror strategy "theirs"
ignoring any changes from "ours". (This doesn't exist in C git.)
Adapt StashApplyCommand and CherrypickCommand to be able to use those
tree merge strategies.
* For the resolve/recursive tree merge strategies, there are content
conflict resolution strategies "ours" and "theirs", which resolve
any conflict hunks by taking the "ours" or "theirs" hunk. In C git
those correspond to "-Xours" or -Xtheirs". Implement that in
MergeAlgorithm, and add API to set and pass through such a strategy
for resolving content conflicts.
* The "ours/theirs" content conflict resolution strategies also apply
for binary files. Handle these cases in ResolveMerger.
Note that the content conflict resolution strategies ("-X ours/theirs")
do _not_ apply to modify/delete or delete/modify conflicts. Such
conflicts are always reported as conflicts by C git. They do apply,
however, if one side completely clears a file's content.
Bug: 501111
Change-Id: I2c9c170c61c440a2ab9c387991e7a0c3ab960e07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Allow file mode conflicts in virtual base commit on recursive merge.
Similar to https://git.eclipse.org/r/c/jgit/jgit/+/175166, ignore
path that have conflicts on attributes, so that the virtual base could
be used by RecursiveMerger.
Change-Id: I99c95445a305558d55bbb9c9e97446caaf61c154
Signed-off-by: Marija Savtchouk <mariasavtchouk@google.com>
Similar to git config file reading lock the file only when writing.
There may still be lock conflicts on writing, but those in the worst
case result in an entry not being added and thus being asked for later
again.
Because the OpenSshServerkeyDatabase and its HostKeyFiles may be (and
usually are) shared between different SSH sessions, we still need to
ensure in-process mutual exclusion.
Bug: 559548
Change-Id: I4af97628deff9eaac2520576917c856949f2680d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Allow info messages in UsernamePasswordCredentialsProvider
o.e.j.ssh.apache produces passphrase prompts containing
InformationalMessage items to show the fingerprint of the key
the passphrase is being asked for. Allow this so that the credentials
provider can be used with o.e.j.ssh.apache.
Change-Id: Ibc2ffd3a987d3118952726091b9b80442972dfd8
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH 8.4 has introduced simple environment variable substitution
for some keys. Implement that feature in our ssh config file parser,
too.
Bug: 572103
Change-Id: I360f2c5510eea4ec3329aeedf3d29dfefc9163f0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apache MINA sshd has an implementation of this, but it doesn't comply
to RFC 8308 [1] and it is buggy. (See SSHD-1141 [2].)
Add a simpler KexExtensionHandler and if the server sends extension
server-sig-algs, use its value to re-order the chosen signature
algorithms such that the algorithms the server announced as supported
are at the front.
If the server didn't tell us anything, don't do anything. RFC 8308
suggests for RSA to default to ssh-rsa, but says once rsa-sha2-* was
"widely enough" adopted, defaulting to that might be OK.
Currently we seem to be in a transition phase; Fedora 33 has already
disabled ssh-rsa by default, and openssh is about to do so. Whatever
we might do without info from the server, it'd be good for some servers
and bad for others. So don't do anything and let the user re-order via
ssh config PubkeyAcceptedAlgorithms on a case-by-case basis.
[1] https://tools.ietf.org/html/rfc8308
[2] https://issues.apache.org/jira/browse/SSHD-1141
Bug: 572056
Change-Id: I59aa691a030ffe0fae54289df00ca5c6e165817b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-5.11:
Refactor CommitCommand to improve readability
CommitCommand: fix formatting
CommitCommand: remove unncessary comment
Ensure post-commit hook is called after index lock was released
sshd: try all configured signature algorithms for a key
sshd: modernize ssh config file parsing
sshd: implement ssh config PubkeyAcceptedAlgorithms
Change-Id: Ic3235ffd84c9d7537a1fe5ff4f216578e6e26724
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
sshd: try all configured signature algorithms for a key
For RSA keys, there may be several configured signature algorithms:
rsa-sha2-512, rsa-sha2-256, and ssh-rsa. Upstream sshd has bug
SSHD-1105 [1] and always and unconditionally uses only the first
configured algorithm. With the default order, this means that it cannot
connect to a server that knows only ssh-rsa, like for instance Apache
MINA sshd servers older than 2.6.0.
This affects for instance bitbucket.org or also AWS Code Commit.
Re-introduce our own pubkey authenticator that fixes this.
Note that a server may impose a penalty (back-off delay) for subsequent
authentication attempts with signature algorithms unknown to the server.
In such cases, users can re-order the signature algorithm list via the
PubkeyAcceptedAlgorithms (formerly PubkeyAcceptedKeyTypes) ssh config.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I7fb9c759ab6532e5f3b6524e9084085ddb2f30d6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
OpenSSH has changed some things in ssh config files. Update our parser
to implement some of these changes:
* ignore trailing comments on a line
* rename PubkeyAcceptedKeyTypes to PubkeyAcceptedAlgorithms
Note that for the rename, openSSH still accepts both names. We do the
same, translating names whenever we get or set values.
Change-Id: Icccca060e6a4350a7acf05ff9e260f2c8c60ee1a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apache MINA sshd 2.6.0 appears to use only the first appropriate
public key signature algorithm for a particular key. See [1]. For
RSA keys, that is rsa-sha2-512. This breaks authentication at servers
that only know the older (and deprecated) ssh-rsa algorithm.
With PubkeyAcceptedAlgorithms, users can re-order algorithms in
the ssh config file per host, if needed. Setting
PubkeyAcceptedAlgorithms ^ssh-rsa
will put "ssh-rsa" at the front of the list of algorithms, and then
authentication at such servers with RSA keys works again.
[1] https://issues.apache.org/jira/browse/SSHD-1105
Bug: 572056
Change-Id: I86c3b93f05960c68936e80642965815926bb2532
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
In [1], improved RevWalk.getMergedInto() is introduced to avoid repeated
work while performing RevWalk.isMergedInto() on many refs. Modify
findBranchesReachableFrom() to use it.
[1] I65de9873dce67af9c415d1d236bf52d31b67e8fe
Change-Id: I81d615241638d4093df64b449637af601843a5ed
Signed-off-by: Adithya Chakilam <quic_achakila@quicinc.com>
In cases where we need to determine if a given commit is merged
into many refs, using isMergedInto(base, tip) for each ref would
cause multiple unwanted walks.
getMergedInto() marks the unreachable commits as uninteresting
which would then avoid walking that same path again.
Using the same api, also introduce isMergedIntoAny() and
isMergedIntoAll()
Change-Id: I65de9873dce67af9c415d1d236bf52d31b67e8fe
Signed-off-by: Adithya Chakilam <quic_achakila@quicinc.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There are two code paths for detecting renames: one on tree diffs
(using DiffFormatter#scan) and the other on single file diffs (using
DiffFormatter#format). The latter skips binary and large files
for rename detection - check [1], but the former doesn't.
This change skips content rename detection for the tree diffs case for
large files. This is essential to avoid expensive computations while
reading the file, especially for callers who don't want to pay that
cost. Content renames are those which involve files with slightly
modified content. Exact renames will still be identified.
The default threshold for file sizes is reused from
PackConfig.DEFAULT_BIG_FILE_THRESHOLD: 50 MB.
[1] 232876421d/org.eclipse.jgit/src/org/eclipse/jgit/diff/RawText.java (386)
Change-Id: Idbc2c29bd381c6e387185204638f76fda47df41e
Signed-off-by: Youssef Elghareeb <ghareeb@google.com>
HTTP cookies: do tilde expansion on http.cookieFile
Git config http.cookieFile must have ~ expansion, compare [1].
It also should be an absolute path. While a relative path is allowed,
C git just passes the value on to libcurl, so it'll be relative to the
current working directory and thus not work in all directories.
Log a warning if the path is relative.
(Alternatives would be to throw an exception, or to resolve the path
relative to the .git directory, or relative to the working tree root,
or relative to the config file it occurs in. But C git does not seem
to do either.)
[1] https://github.com/git/git/commit/e5a39ad8e
Bug: 571798
Change-Id: I5cdab6061d0613ac7d8cb7977e5b97f5b88f562d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* master:
Manually set status of jmh dependencies
Update DEPENDENCIES report for 5.11.0
Add dependency to dash-licenses
PackFile: Add id + ext based constructors
GC: deleteOrphans: Use PackFile
PackExt: Convert to Enum
Restore preserved packs during missing object seeks
Pack: Replace extensions bitset with bitmapIdx PackFile
PackDirectory: Use PackFile to ensure we find preserved packs
GC: Use PackFile to de-dup logic
Create a PackFile class for Pack filenames
Change-Id: I1d56517cb6a95e10aed22cdb9e5f3e504872d110
The following jmh dependencies were approved as works-with:
- jmh-core/1.21 has GPL-2.0 license and was approved in CQ20517
- jmh-generator-annprocess/1.21 has GPL-2.0 license and was approved in
CQ20518
Change-Id: Ibbe28c6e8359c576b23f40281e74f2e0d4a0dee0
This is required to run the license check using the license tool [1]
required by the Eclipse project handbook [2]:
mvn org.eclipse.dash:license-tool-plugin:license-check -Ddash.summary=DEPENDENCIES
Note: the tool still requires Java 11 hence it needs to be run in a
separate build step and is not yet integrated in the build which runs
on Java 8.
[1] https://github.com/eclipse/dash-licenses
[2] https://www.eclipse.org/projects/handbook/#ip-license-tool
Change-Id: Ib41d54de246c3c9499cc3be9f026294c39fdfd99
Add new constructors to PackFile to improve a common use case where
callers know the directory, id, and extension, but previously needed to
construct a valid file name (with prefix, '.', etc) to create a
PackFile. Most callers can use the variant that has id as an ObjectId,
but provide an id as String variant too.
Change-Id: I39e4466abe8c9509f5916d5bfe675066570b8585
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
It's easier to follow the logic here when we can use our own objects
instead of Strings.
Change-Id: I6a166edcc67903fc1ca3544f458634c4cef8fde7
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
This class already looked very much like an Enum, but wasn't one.
As an Enum, we can use PackExt in EnumMaps and EnumSets. Convert the
Map key usage in PackDirectory to an EnumMap.
Change-Id: Ice097fd468a05805f914e6862fbd1d96ec8c45d1
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Restore preserved packs during missing object seeks
Provide a recovery path for objects being referenced during the pack
pruning race. Due to the pack pruning race, it is possible for objects
to become referenced after a pack has been deemed safe to prune, but
before it actually gets pruned. If this happened previously, the newly
referenced objects would be missing and potentially result in a
corrupted ref.
Add the ability to recover from this situation when an object is missing
but happens to still be available in a pack in the "preserved"
directory. This is likely only useful when used in conjunction with the
--preserve-old-packs GC option, which prunes packs by hard-linking to
the preserved directory. If an object is missing and found in a pack in
the preserved directory, immediately recover that pack and its
associated files (idx, bitmaps...) by moving them back to the original
pack directory, and then retry the operation that would have failed due
to the missing object. This retry can now succeed and the repository
may avoid corruption. This approach should drastically reduce the
chance of a corrupt repository during pack pruning at very little extra
cost. This extra cost should only be incurred when objects are missing
and a failure would normally occur.
Change-Id: I2a704e3276b88cc892159d9bfe2455c6eec64252
Signed-off-by: Martin Fick <quic_mfick@quicinc.com>
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Pack: Replace extensions bitset with bitmapIdx PackFile
The only extension that was ever consulted from the bitmap was the
bitmap index. We can simplify the Pack code as well as the code of
all the callers if we focus on just that usage.
Change-Id: I799ddfdee93142af67ce5081d14a430d36aa4c15
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
PackDirectory: Use PackFile to ensure we find preserved packs
Update scanPacksImpl and listPackDirectory (renamed to
getPackFilesByExtById) to use the new PackFile functionality to
validate file names and complete pack file sets (.pack, .idx, etc).
Most importantly, this allows a later change to rely on scanPacks() to
complete a packList that contains packs with the 'old-' prefix in their
extension.
This also eliminates duplication of logic for how to identify and
construct pack files.
Change-Id: I7175e5fefb187a29e0a7cf53c392aee922314f31
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Matthias Sohn
Thomas Wolf
Marija Savtchouk
Marco Miller
David Ostrovsky
Adithya Chakilam
Youssef Elghareeb
Nasser Grainawi
Martin Fick